(Adding Damien, he's the ATA guy these days - leaving the below intact) On 5/28/24 1:15 PM, Thomas Gleixner wrote: > Tim! > > On Tue, May 28 2024 at 17:43, Tim Teichmann wrote: >> On 24/05/27 07:17pm, Thomas Gleixner wrote: >> I've just tested the fix you've provided in the previous email. >> The exact patches are attached to the ticket in the archlinux bugtracker[0]. > > Thanks! I will write a proper changelog and ship it. > >> The error regarding CPU scheduling disappeared for both kernel verions[0]. >> However, the ATA bus error still occurs. >> >> Also, I suppose that the ATA bus error is the same as the previous one, >> because the only value that changes in the exception message is SAct. >> >> This is the message of the ATA error before the patch: >> >>>> May 23 23:36:49 archlinux kernel: smpboot: x86: Booting SMP configuration: >>>> May 23 23:36:49 archlinux kernel: .... node #0, CPUs: #2 #4 #6 >>>> May 23 23:36:49 archlinux kernel: __common_interrupt: 2.55 No irq handler for vector >>>> May 23 23:36:49 archlinux kernel: __common_interrupt: 4.55 No irq handler for vector >>>> May 23 23:36:49 archlinux kernel: __common_interrupt: 6.55 No irq handler for vector >>>> >>>> ATA stuff: >>>> >>>> May 23 23:36:59 archlinux kernel: ata2.00: exception Emask 0x10 SAct 0x1fffe000 SErr 0x40d0002 action 0xe frozen >>> >>> That's probably just the fallout of the above. > > It's in reality not related and I saw some other AHCI fallout fly by. > >> And that's the message after the patch: >> >> [ 4.877584] ata2.00: exception Emask 0x10 SAct 0x80000000 SErr 0x40d0002 action 0xe frozen >> >> The full dmesg outputs are in the attachments. > > Cc'ed the AHCI people and left the info around for them. > >> Thank you, >> Tim >> >> >> [0]: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/56#note_188563 >> [ 0.000000] Linux version 6.9.2-arch1-1.2 (linux@archlinux) (gcc (GCC) 14.1.1 20240522, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Mon, 27 May 2024 18:36:31 +0000 >> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=963daeed-0888-4658-9f17-18bd343dfb2a rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet >> [ 0.000000] BIOS-provided physical RAM map: >> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable >> [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved >> [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved >> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfdeffff] usable >> [ 0.000000] BIOS-e820: [mem 0x00000000bfdf0000-0x00000000bfdf2fff] ACPI NVS >> [ 0.000000] BIOS-e820: [mem 0x00000000bfdf3000-0x00000000bfdfffff] ACPI data >> [ 0.000000] BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfefffff] reserved >> [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved >> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved >> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable >> [ 0.000000] NX (Execute Disable) protection: active >> [ 0.000000] APIC: Static calls initialized >> [ 0.000000] SMBIOS 2.4 present. >> [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-78LMT-USB3 R2/GA-78LMT-USB3 R2, BIOS F1 11/08/2017 >> [ 0.000000] tsc: Fast TSC calibration using PIT >> [ 0.000000] tsc: Detected 3322.271 MHz processor >> [ 0.002937] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved >> [ 0.002941] e820: remove [mem 0x000a0000-0x000fffff] usable >> [ 0.002947] last_pfn = 0x43f000 max_arch_pfn = 0x400000000 >> [ 0.002956] total RAM covered: 3070M >> [ 0.003253] Found optimal setting for mtrr clean up >> [ 0.003254] gran_size: 64K chunk_size: 4M num_reg: 3 lose cover RAM: 0G >> [ 0.003260] MTRR map: 7 entries (4 fixed + 3 variable; max 21), built from 9 variable MTRRs >> [ 0.003262] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT >> [ 0.004111] e820: update [mem 0xbfe00000-0xffffffff] usable ==> reserved >> [ 0.004120] last_pfn = 0xbfdf0 max_arch_pfn = 0x400000000 >> [ 0.007030] found SMP MP-table at [mem 0x000f5ea0-0x000f5eaf] >> [ 0.007051] Using GB pages for direct mapping >> [ 0.007376] RAMDISK: [mem 0x31c9f000-0x34e46fff] >> [ 0.007499] ACPI: Early table checksum verification disabled >> [ 0.007504] ACPI: RSDP 0x00000000000F78B0 000014 (v00 GBT ) >> [ 0.007508] ACPI: RSDT 0x00000000BFDF3000 000040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) >> [ 0.007515] ACPI: FACP 0x00000000BFDF3080 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) >> [ 0.007521] ACPI: DSDT 0x00000000BFDF3100 0069E7 (v01 GBT GBTUACPI 00001000 MSFT 03000000) >> [ 0.007526] ACPI: FACS 0x00000000BFDF0000 000040 >> [ 0.007529] ACPI: MSDM 0x00000000BFDF9BC0 000055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101) >> [ 0.007534] ACPI: HPET 0x00000000BFDF9C40 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) >> [ 0.007538] ACPI: MCFG 0x00000000BFDF9C80 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) >> [ 0.007542] ACPI: TAMG 0x00000000BFDF9CC0 000022 (v01 GBT GBT B0 5455312E BG?? 00000101) >> [ 0.007546] ACPI: APIC 0x00000000BFDF9B00 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) >> [ 0.007551] ACPI: SSDT 0x00000000BFDF9D60 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) >> [ 0.007554] ACPI: Reserving FACP table memory at [mem 0xbfdf3080-0xbfdf30f3] >> [ 0.007556] ACPI: Reserving DSDT table memory at [mem 0xbfdf3100-0xbfdf9ae6] >> [ 0.007558] ACPI: Reserving FACS table memory at [mem 0xbfdf0000-0xbfdf003f] >> [ 0.007559] ACPI: Reserving MSDM table memory at [mem 0xbfdf9bc0-0xbfdf9c14] >> [ 0.007560] ACPI: Reserving HPET table memory at [mem 0xbfdf9c40-0xbfdf9c77] >> [ 0.007561] ACPI: Reserving MCFG table memory at [mem 0xbfdf9c80-0xbfdf9cbb] >> [ 0.007562] ACPI: Reserving TAMG table memory at [mem 0xbfdf9cc0-0xbfdf9ce1] >> [ 0.007564] ACPI: Reserving APIC table memory at [mem 0xbfdf9b00-0xbfdf9bbb] >> [ 0.007565] ACPI: Reserving SSDT table memory at [mem 0xbfdf9d60-0xbfdfb473] >> [ 0.007628] No NUMA configuration found >> [ 0.007629] Faking a node at [mem 0x0000000000000000-0x000000043effffff] >> [ 0.007632] NODE_DATA(0) allocated [mem 0x43effb000-0x43effffff] >> [ 0.007673] Zone ranges: >> [ 0.007674] DMA [mem 0x0000000000001000-0x0000000000ffffff] >> [ 0.007677] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] >> [ 0.007678] Normal [mem 0x0000000100000000-0x000000043effffff] >> [ 0.007680] Device empty >> [ 0.007682] Movable zone start for each node >> [ 0.007682] Early memory node ranges >> [ 0.007683] node 0: [mem 0x0000000000001000-0x000000000009efff] >> [ 0.007685] node 0: [mem 0x0000000000100000-0x00000000bfdeffff] >> [ 0.007686] node 0: [mem 0x0000000100000000-0x000000043effffff] >> [ 0.007689] Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff] >> [ 0.007695] On node 0, zone DMA: 1 pages in unavailable ranges >> [ 0.007735] On node 0, zone DMA: 97 pages in unavailable ranges >> [ 0.054266] On node 0, zone Normal: 528 pages in unavailable ranges >> [ 0.054340] On node 0, zone Normal: 4096 pages in unavailable ranges >> [ 0.054523] ACPI: PM-Timer IO Port: 0x4008 >> [ 0.054534] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) >> [ 0.054536] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) >> [ 0.054537] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) >> [ 0.054539] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) >> [ 0.054540] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) >> [ 0.054541] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) >> [ 0.054542] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) >> [ 0.054543] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) >> [ 0.054556] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 >> [ 0.054559] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> [ 0.054561] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) >> [ 0.054566] ACPI: Using ACPI (MADT) for SMP configuration information >> [ 0.054567] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 >> [ 0.054577] CPU topo: Max. logical packages: 1 >> [ 0.054578] CPU topo: Max. logical dies: 1 >> [ 0.054579] CPU topo: Max. dies per package: 1 >> [ 0.054584] CPU topo: Max. threads per core: 1 >> [ 0.054585] CPU topo: Num. cores per package: 8 >> [ 0.054586] CPU topo: Num. threads per package: 8 >> [ 0.054587] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs >> [ 0.054599] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] >> [ 0.054601] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] >> [ 0.054602] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff] >> [ 0.054604] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff] >> [ 0.054605] PM: hibernation: Registered nosave memory: [mem 0xbfdf0000-0xbfdf2fff] >> [ 0.054606] PM: hibernation: Registered nosave memory: [mem 0xbfdf3000-0xbfdfffff] >> [ 0.054607] PM: hibernation: Registered nosave memory: [mem 0xbfe00000-0xbfefffff] >> [ 0.054608] PM: hibernation: Registered nosave memory: [mem 0xbff00000-0xdfffffff] >> [ 0.054609] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] >> [ 0.054610] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfebfffff] >> [ 0.054611] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xffffffff] >> [ 0.054613] [mem 0xbff00000-0xdfffffff] available for PCI devices >> [ 0.054615] Booting paravirtualized kernel on bare hardware >> [ 0.054618] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns >> [ 0.060537] setup_percpu: NR_CPUS:320 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 >> [ 0.061434] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288 >> [ 0.061443] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152 >> [ 0.061446] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 >> [ 0.061468] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=963daeed-0888-4658-9f17-18bd343dfb2a rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet >> [ 0.061547] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux", will be passed to user space. >> [ 0.064351] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) >> [ 0.065732] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) >> [ 0.065812] Fallback order for Node 0: 0 >> [ 0.065818] Built 1 zonelists, mobility grouping on. Total pages: 4123960 >> [ 0.065820] Policy zone: Normal >> [ 0.066244] mem auto-init: stack:all(zero), heap alloc:on, heap free:off >> [ 0.066251] software IO TLB: area num 8. >> [ 0.151668] Memory: 16301808K/16758328K available (18432K kernel code, 2164K rwdata, 13296K rodata, 3412K init, 3624K bss, 456260K reserved, 0K cma-reserved) >> [ 0.159910] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 >> [ 0.160107] ftrace: allocating 49852 entries in 195 pages >> [ 0.171323] ftrace: allocated 195 pages with 4 groups >> [ 0.171486] Dynamic Preempt: full >> [ 0.171715] rcu: Preemptible hierarchical RCU implementation. >> [ 0.171717] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8. >> [ 0.171718] rcu: RCU priority boosting: priority 1 delay 500 ms. >> [ 0.171720] Trampoline variant of Tasks RCU enabled. >> [ 0.171720] Rude variant of Tasks RCU enabled. >> [ 0.171721] Tracing variant of Tasks RCU enabled. >> [ 0.171722] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. >> [ 0.171723] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 >> [ 0.171731] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. >> [ 0.171734] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. >> [ 0.171736] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. >> [ 0.177324] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16 >> [ 0.177539] rcu: srcu_init: Setting srcu_struct sizes based on contention. >> [ 0.177631] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) >> [ 0.177707] spurious 8259A interrupt: IRQ7. >> [ 0.177727] Console: colour dummy device 80x25 >> [ 0.177730] printk: legacy console [tty0] enabled >> [ 0.178132] ACPI: Core revision 20230628 >> [ 0.178358] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns >> [ 0.178391] APIC: Switch to symmetric I/O mode setup >> [ 0.178896] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 >> [ 0.195044] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2fe37b0bf9a, max_idle_ns: 440795315222 ns >> [ 0.195049] Calibrating delay loop (skipped), value calculated using timer frequency.. 6647.39 BogoMIPS (lpj=11074236) >> [ 0.195073] LVT offset 1 assigned for vector 0xf9 >> [ 0.195078] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 >> [ 0.195079] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 >> [ 0.195084] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization >> [ 0.195087] Spectre V2 : Mitigation: Retpolines >> [ 0.195088] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch >> [ 0.195089] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT >> [ 0.195090] Spectre V2 : Enabling Speculation Barrier for firmware calls >> [ 0.195091] RETBleed: Mitigation: untrained return thunk >> [ 0.195093] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier >> [ 0.195095] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl >> [ 0.195099] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' >> [ 0.195101] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' >> [ 0.195102] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' >> [ 0.195104] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 >> [ 0.195106] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. >> [ 0.218738] Freeing SMP alternatives memory: 40K >> [ 0.218744] pid_max: default: 32768 minimum: 301 >> [ 0.219474] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf >> [ 0.220315] landlock: Up and running. >> [ 0.220317] Yama: becoming mindful. >> [ 0.220324] LSM support for eBPF active >> [ 0.220571] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) >> [ 0.220611] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) >> [ 0.228515] APIC calibration not consistent with PM-Timer: 0ms instead of 100ms >> [ 0.228521] APIC delta adjusted to PM-Timer: 1261600 (1512) >> [ 0.228531] smpboot: CPU0: AMD FX(tm)-8300 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0) >> [ 0.228924] Performance Events: Fam15h core perfctr, AMD PMU driver. >> [ 0.228930] ... version: 0 >> [ 0.228931] ... bit width: 48 >> [ 0.228932] ... generic registers: 6 >> [ 0.228933] ... value mask: 0000ffffffffffff >> [ 0.228934] ... max period: 00007fffffffffff >> [ 0.228936] ... fixed-purpose events: 0 >> [ 0.228936] ... event mask: 000000000000003f >> [ 0.229048] signal: max sigframe size: 1776 >> [ 0.229102] rcu: Hierarchical SRCU implementation. >> [ 0.229104] rcu: Max phase no-delay instances is 1000. >> [ 0.231414] MCE: In-kernel MCE decoding enabled. >> [ 0.231495] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. >> [ 0.231629] smp: Bringing up secondary CPUs ... >> [ 0.231713] smpboot: x86: Booting SMP configuration: >> [ 0.231713] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 >> [ 0.000815] __common_interrupt: 1.55 No irq handler for vector >> [ 0.000815] __common_interrupt: 2.55 No irq handler for vector >> [ 0.000815] __common_interrupt: 3.55 No irq handler for vector >> [ 0.000815] __common_interrupt: 4.55 No irq handler for vector >> [ 0.000815] __common_interrupt: 5.55 No irq handler for vector >> [ 0.000815] __common_interrupt: 6.55 No irq handler for vector >> [ 0.000815] __common_interrupt: 7.55 No irq handler for vector >> [ 0.262715] smp: Brought up 1 node, 8 CPUs >> [ 0.262715] smpboot: Total of 8 processors activated (53177.18 BogoMIPS) >> [ 0.266086] devtmpfs: initialized >> [ 0.266086] x86/mm: Memory block size: 128MB >> [ 0.269083] ACPI: PM: Registering ACPI NVS region [mem 0xbfdf0000-0xbfdf2fff] (12288 bytes) >> [ 0.269083] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns >> [ 0.269083] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) >> [ 0.269083] pinctrl core: initialized pinctrl subsystem >> [ 0.269108] PM: RTC time: 14:51:09, date: 2024-05-28 >> [ 0.269538] NET: Registered PF_NETLINK/PF_ROUTE protocol family >> [ 0.269947] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations >> [ 0.270211] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations >> [ 0.270526] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations >> [ 0.270538] audit: initializing netlink subsys (disabled) >> [ 0.271744] audit: type=2000 audit(1716907868.096:1): state=initialized audit_enabled=0 res=1 >> [ 0.271862] thermal_sys: Registered thermal governor 'fair_share' >> [ 0.271864] thermal_sys: Registered thermal governor 'bang_bang' >> [ 0.271866] thermal_sys: Registered thermal governor 'step_wise' >> [ 0.271867] thermal_sys: Registered thermal governor 'user_space' >> [ 0.271868] thermal_sys: Registered thermal governor 'power_allocator' >> [ 0.271881] cpuidle: using governor ladder >> [ 0.271881] cpuidle: using governor menu >> [ 0.271881] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 >> [ 0.272117] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] >> [ 0.272122] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry >> [ 0.272140] PCI: Using configuration type 1 for base access >> [ 0.272340] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. >> [ 0.275131] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages >> [ 0.275131] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page >> [ 0.275131] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages >> [ 0.275131] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page >> [ 0.275140] Demotion targets for Node 0: null >> [ 0.275248] fbcon: Taking over console >> [ 0.275248] ACPI: Added _OSI(Module Device) >> [ 0.275248] ACPI: Added _OSI(Processor Device) >> [ 0.275248] ACPI: Added _OSI(3.0 _SCP Extensions) >> [ 0.275248] ACPI: Added _OSI(Processor Aggregator Device) >> [ 0.278535] ACPI: 2 ACPI AML tables successfully acquired and loaded >> [ 0.278811] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438) >> [ 0.278818] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438) >> [ 0.278824] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438) >> [ 0.278830] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438) >> [ 0.278842] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438) >> [ 0.278848] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438) >> [ 0.278854] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438) >> [ 0.278859] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438) >> [ 0.278871] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438) >> [ 0.278877] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438) >> [ 0.278882] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438) >> [ 0.278888] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438) >> [ 0.278899] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438) >> [ 0.278905] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438) >> [ 0.278910] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438) >> [ 0.278916] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438) >> [ 0.278927] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438) >> [ 0.278933] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438) >> [ 0.278938] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438) >> [ 0.278944] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438) >> [ 0.278955] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438) >> [ 0.278961] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438) >> [ 0.278966] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438) >> [ 0.278972] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438) >> [ 0.278983] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438) >> [ 0.278989] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438) >> [ 0.278994] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438) >> [ 0.278999] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438) >> [ 0.279010] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438) >> [ 0.279016] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438) >> [ 0.279021] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438) >> [ 0.279026] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438) >> [ 0.279038] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438) >> [ 0.279043] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438) >> [ 0.279049] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438) >> [ 0.279054] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438) >> [ 0.279065] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20230628/dspkginit-438) >> [ 0.279071] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20230628/dspkginit-438) >> [ 0.279076] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20230628/dspkginit-438) >> [ 0.279082] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20230628/dspkginit-438) >> [ 0.285252] ACPI: _OSC evaluation for CPUs failed, trying _PDC >> [ 0.285324] ACPI: Interpreter enabled >> [ 0.285345] ACPI: PM: (supports S0 S3 S4 S5) >> [ 0.285347] ACPI: Using IOAPIC for interrupt routing >> [ 0.285667] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug >> [ 0.285669] PCI: Using E820 reservations for host bridge windows >> [ 0.285824] ACPI: Enabled 5 GPEs in block 00 to 1F >> [ 0.291427] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) >> [ 0.291435] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] >> [ 0.291811] PCI host bridge to bus 0000:00 >> [ 0.291814] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] >> [ 0.291817] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] >> [ 0.291819] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] >> [ 0.291822] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] >> [ 0.291824] pci_bus 0000:00: root bus resource [bus 00-ff] >> [ 0.291842] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000 conventional PCI endpoint >> [ 0.291854] pci 0000:00:00.0: [Firmware Bug]: BAR 3: invalid; can't size >> [ 0.291930] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 PCIe Root Port >> [ 0.291943] pci 0000:00:02.0: PCI bridge to [bus 01] >> [ 0.291947] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] >> [ 0.291950] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff] >> [ 0.291955] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] >> [ 0.291961] pci 0000:00:02.0: enabling Extended Tags >> [ 0.291989] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold >> [ 0.292095] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400 PCIe Root Port >> [ 0.292108] pci 0000:00:04.0: PCI bridge to [bus 02] >> [ 0.292112] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] >> [ 0.292115] pci 0000:00:04.0: bridge window [mem 0xfda00000-0xfdafffff] >> [ 0.292120] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] >> [ 0.292126] pci 0000:00:04.0: enabling Extended Tags >> [ 0.292152] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold >> [ 0.292253] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400 PCIe Root Port >> [ 0.292266] pci 0000:00:06.0: PCI bridge to [bus 03] >> [ 0.292270] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff] >> [ 0.292272] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff] >> [ 0.292277] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] >> [ 0.292283] pci 0000:00:06.0: enabling Extended Tags >> [ 0.292309] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold >> [ 0.292433] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint >> [ 0.292450] pci 0000:00:11.0: BAR 0 [io 0xff00-0xff07] >> [ 0.292460] pci 0000:00:11.0: BAR 1 [io 0xfe00-0xfe03] >> [ 0.292469] pci 0000:00:11.0: BAR 2 [io 0xfd00-0xfd07] >> [ 0.292478] pci 0000:00:11.0: BAR 3 [io 0xfc00-0xfc03] >> [ 0.292487] pci 0000:00:11.0: BAR 4 [io 0xfb00-0xfb0f] >> [ 0.292497] pci 0000:00:11.0: BAR 5 [mem 0xfe02f000-0xfe02f3ff] >> [ 0.292518] pci 0000:00:11.0: set SATA to AHCI mode >> [ 0.292622] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint >> [ 0.292639] pci 0000:00:12.0: BAR 0 [mem 0xfe02e000-0xfe02efff] >> [ 0.292770] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint >> [ 0.292787] pci 0000:00:12.1: BAR 0 [mem 0xfe02d000-0xfe02dfff] >> [ 0.292927] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint >> [ 0.292944] pci 0000:00:12.2: BAR 0 [mem 0xfe02c000-0xfe02c0ff] >> [ 0.293023] pci 0000:00:12.2: supports D1 D2 >> [ 0.293025] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot >> [ 0.293112] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint >> [ 0.293129] pci 0000:00:13.0: BAR 0 [mem 0xfe02b000-0xfe02bfff] >> [ 0.293258] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint >> [ 0.293275] pci 0000:00:13.1: BAR 0 [mem 0xfe02a000-0xfe02afff] >> [ 0.293409] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint >> [ 0.293426] pci 0000:00:13.2: BAR 0 [mem 0xfe029000-0xfe0290ff] >> [ 0.293506] pci 0000:00:13.2: supports D1 D2 >> [ 0.293508] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot >> [ 0.293602] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint >> [ 0.293762] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint >> [ 0.293778] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] >> [ 0.293788] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] >> [ 0.293797] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] >> [ 0.293806] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] >> [ 0.293815] pci 0000:00:14.1: BAR 4 [io 0xfa00-0xfa0f] >> [ 0.293835] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk >> [ 0.293837] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk >> [ 0.293838] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk >> [ 0.293840] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk >> [ 0.293949] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 conventional PCI endpoint >> [ 0.293971] pci 0000:00:14.2: BAR 0 [mem 0xfe024000-0xfe027fff 64bit] >> [ 0.294037] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold >> [ 0.294116] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint >> [ 0.294285] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge >> [ 0.294316] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode) >> [ 0.294321] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] >> [ 0.294325] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] >> [ 0.294331] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] >> [ 0.294416] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint >> [ 0.294433] pci 0000:00:14.5: BAR 0 [mem 0xfe028000-0xfe028fff] >> [ 0.294564] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint >> [ 0.294614] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint >> [ 0.294661] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint >> [ 0.294710] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint >> [ 0.294759] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint >> [ 0.294808] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint >> [ 0.294917] pci 0000:01:00.0: [10de:1c82] type 00 class 0x030000 PCIe Legacy Endpoint >> [ 0.294930] pci 0000:01:00.0: BAR 0 [mem 0xfb000000-0xfbffffff] >> [ 0.294941] pci 0000:01:00.0: BAR 1 [mem 0xc0000000-0xcfffffff 64bit pref] >> [ 0.294952] pci 0000:01:00.0: BAR 3 [mem 0xde000000-0xdfffffff 64bit pref] >> [ 0.294960] pci 0000:01:00.0: BAR 5 [io 0xef00-0xef7f] >> [ 0.294967] pci 0000:01:00.0: ROM [mem 0x00000000-0x0007ffff pref] >> [ 0.294995] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] >> [ 0.295075] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) >> [ 0.295151] pci 0000:01:00.1: [10de:0fb9] type 00 class 0x040300 PCIe Endpoint >> [ 0.295165] pci 0000:01:00.1: BAR 0 [mem 0xfcffc000-0xfcffffff] >> [ 0.295315] pci 0000:00:02.0: PCI bridge to [bus 01] >> [ 0.295357] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330 PCIe Endpoint >> [ 0.295372] pci 0000:02:00.0: BAR 0 [mem 0xfdaff000-0xfdafffff 64bit] >> [ 0.295433] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 0.295503] pci 0000:00:04.0: PCI bridge to [bus 02] >> [ 0.295552] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint >> [ 0.295568] pci 0000:03:00.0: BAR 0 [io 0xce00-0xceff] >> [ 0.295589] pci 0000:03:00.0: BAR 2 [mem 0xfdeff000-0xfdefffff 64bit] >> [ 0.295602] pci 0000:03:00.0: BAR 4 [mem 0xfddfc000-0xfddfffff 64bit pref] >> [ 0.295684] pci 0000:03:00.0: supports D1 D2 >> [ 0.295685] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 0.295808] pci 0000:00:06.0: PCI bridge to [bus 03] >> [ 0.295824] pci_bus 0000:04: extended config space not accessible >> [ 0.295886] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode) >> [ 0.295895] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) >> [ 0.295897] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) >> [ 0.295900] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) >> [ 0.295902] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode) >> [ 0.296188] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 >> [ 0.296190] ACPI: PCI: Interrupt link LNKA disabled >> [ 0.296247] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 >> [ 0.296249] ACPI: PCI: Interrupt link LNKB disabled >> [ 0.296306] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 >> [ 0.296308] ACPI: PCI: Interrupt link LNKC disabled >> [ 0.296363] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 >> [ 0.296365] ACPI: PCI: Interrupt link LNKD disabled >> [ 0.296421] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 >> [ 0.296422] ACPI: PCI: Interrupt link LNKE disabled >> [ 0.296477] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 >> [ 0.296479] ACPI: PCI: Interrupt link LNKF disabled >> [ 0.296535] ACPI: PCI: Interrupt link LNK0 configured for IRQ 0 >> [ 0.296536] ACPI: PCI: Interrupt link LNK0 disabled >> [ 0.296591] ACPI: PCI: Interrupt link LNK1 configured for IRQ 0 >> [ 0.296592] ACPI: PCI: Interrupt link LNK1 disabled >> [ 0.298404] iommu: Default domain type: Translated >> [ 0.298404] iommu: DMA domain TLB invalidation policy: lazy mode >> [ 0.298664] SCSI subsystem initialized >> [ 0.298672] libata version 3.00 loaded. >> [ 0.298672] ACPI: bus type USB registered >> [ 0.298672] usbcore: registered new interface driver usbfs >> [ 0.298672] usbcore: registered new interface driver hub >> [ 0.298672] usbcore: registered new device driver usb >> [ 0.298672] EDAC MC: Ver: 3.0.0 >> [ 0.299557] NetLabel: Initializing >> [ 0.299557] NetLabel: domain hash size = 128 >> [ 0.299557] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO >> [ 0.299557] NetLabel: unlabeled traffic allowed by default >> [ 0.299557] mctp: management component transport protocol core >> [ 0.299557] NET: Registered PF_MCTP protocol family >> [ 0.299557] PCI: Using ACPI for IRQ routing >> [ 0.306688] PCI: pci_cache_line_size set to 64 bytes >> [ 0.306740] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] >> [ 0.306743] e820: reserve RAM buffer [mem 0xbfdf0000-0xbfffffff] >> [ 0.306744] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff] >> [ 0.308426] pci 0000:01:00.0: vgaarb: setting as boot VGA device >> [ 0.308426] pci 0000:01:00.0: vgaarb: bridge control possible >> [ 0.308426] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none >> [ 0.308426] vgaarb: loaded >> [ 0.308429] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 >> [ 0.308434] hpet0: 4 comparators, 32-bit 14.318180 MHz counter >> [ 0.311840] clocksource: Switched to clocksource tsc-early >> [ 0.313225] VFS: Disk quotas dquot_6.6.0 >> [ 0.313287] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) >> [ 0.313388] pnp: PnP ACPI init >> [ 0.313472] system 00:00: [io 0x04d0-0x04d1] has been reserved >> [ 0.313475] system 00:00: [io 0x0220-0x0225] has been reserved >> [ 0.313478] system 00:00: [io 0x0290-0x0294] has been reserved >> [ 0.313783] system 00:01: [io 0x4100-0x411f] has been reserved >> [ 0.313790] system 00:01: [io 0x0228-0x022f] has been reserved >> [ 0.313793] system 00:01: [io 0x040b] has been reserved >> [ 0.313795] system 00:01: [io 0x04d6] has been reserved >> [ 0.313797] system 00:01: [io 0x0c00-0x0c01] has been reserved >> [ 0.313799] system 00:01: [io 0x0c14] has been reserved >> [ 0.313801] system 00:01: [io 0x0c50-0x0c52] has been reserved >> [ 0.313803] system 00:01: [io 0x0c6c-0x0c6d] has been reserved >> [ 0.313805] system 00:01: [io 0x0c6f] has been reserved >> [ 0.313807] system 00:01: [io 0x0cd0-0x0cd1] has been reserved >> [ 0.313809] system 00:01: [io 0x0cd2-0x0cd3] has been reserved >> [ 0.313810] system 00:01: [io 0x0cd4-0x0cdf] has been reserved >> [ 0.313812] system 00:01: [io 0x4000-0x40fe] has been reserved >> [ 0.313814] system 00:01: [io 0x4210-0x4217] has been reserved >> [ 0.313816] system 00:01: [io 0x0b00-0x0b0f] has been reserved >> [ 0.313818] system 00:01: [io 0x0b10-0x0b1f] has been reserved >> [ 0.313820] system 00:01: [io 0x0b20-0x0b3f] has been reserved >> [ 0.313822] system 00:01: [mem 0x00000000-0x00000fff window] could not be reserved >> [ 0.313825] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved >> [ 0.314737] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved >> [ 0.314963] pnp 00:06: disabling [mem 0x000ce600-0x000cffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff] >> [ 0.314986] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved >> [ 0.314989] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved >> [ 0.314991] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved >> [ 0.314993] system 00:06: [mem 0xbfdf0000-0xbfdfffff] could not be reserved >> [ 0.314996] system 00:06: [mem 0xffff0000-0xffffffff] has been reserved >> [ 0.314998] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved >> [ 0.315000] system 00:06: [mem 0x00100000-0xbfdeffff] could not be reserved >> [ 0.315003] system 00:06: [mem 0xbfe00000-0xbfefffff] has been reserved >> [ 0.315005] system 00:06: [mem 0xbff00000-0xbfffffff] could not be reserved >> [ 0.315007] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved >> [ 0.315009] system 00:06: [mem 0xfee00000-0xfee00fff] could not be reserved >> [ 0.315011] system 00:06: [mem 0xfff80000-0xfffeffff] has been reserved >> [ 0.315035] pnp: PnP ACPI: found 7 devices >> [ 0.321759] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns >> [ 0.322043] NET: Registered PF_INET protocol family >> [ 0.322351] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) >> [ 0.339864] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) >> [ 0.339910] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) >> [ 0.340073] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) >> [ 0.340507] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) >> [ 0.340824] TCP: Hash tables configured (established 131072 bind 65536) >> [ 0.341042] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) >> [ 0.341169] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) >> [ 0.341254] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) >> [ 0.341355] NET: Registered PF_UNIX/PF_LOCAL protocol family >> [ 0.341370] NET: Registered PF_XDP protocol family >> [ 0.341386] pci 0000:00:02.0: PCI bridge to [bus 01] >> [ 0.341391] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] >> [ 0.341395] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff] >> [ 0.341398] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] >> [ 0.341403] pci 0000:00:04.0: PCI bridge to [bus 02] >> [ 0.341405] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] >> [ 0.341408] pci 0000:00:04.0: bridge window [mem 0xfda00000-0xfdafffff] >> [ 0.341411] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] >> [ 0.341414] pci 0000:00:06.0: PCI bridge to [bus 03] >> [ 0.341417] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff] >> [ 0.341419] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff] >> [ 0.341422] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] >> [ 0.341426] pci 0000:00:14.4: PCI bridge to [bus 04] >> [ 0.341429] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] >> [ 0.341434] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] >> [ 0.341438] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] >> [ 0.341445] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] >> [ 0.341447] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] >> [ 0.341449] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window] >> [ 0.341452] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window] >> [ 0.341454] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] >> [ 0.341456] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff] >> [ 0.341457] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref] >> [ 0.341459] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] >> [ 0.341461] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff] >> [ 0.341463] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] >> [ 0.341465] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] >> [ 0.341467] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff] >> [ 0.341469] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref] >> [ 0.341471] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] >> [ 0.341473] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff] >> [ 0.341474] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref] >> [ 0.341476] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] >> [ 0.341478] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] >> [ 0.341480] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000dffff window] >> [ 0.341482] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfebfffff window] >> [ 0.364641] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x730 took 22551 usecs >> [ 0.384684] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x730 took 19559 usecs >> [ 0.404731] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x730 took 19371 usecs >> [ 0.424781] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x730 took 19569 usecs >> [ 0.444850] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x730 took 19381 usecs >> [ 0.444885] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec >> [ 0.444921] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 >> [ 0.445120] PCI: CLS 64 bytes, default 64 >> [ 0.445128] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) >> [ 0.445129] software IO TLB: mapped [mem 0x00000000bbdf0000-0x00000000bfdf0000] (64MB) >> [ 0.445171] LVT offset 0 assigned for vector 0x400 >> [ 0.445205] Trying to unpack rootfs image as initramfs... >> [ 0.449662] perf: AMD IBS detected (0x000000ff) >> [ 0.451294] Initialise system trusted keyrings >> [ 0.451307] Key type blacklist registered >> [ 0.451387] workingset: timestamp_bits=41 max_order=22 bucket_order=0 >> [ 0.451400] zbud: loaded >> [ 0.451792] fuse: init (API version 7.40) >> [ 0.452284] integrity: Platform Keyring initialized >> [ 0.452291] integrity: Machine keyring initialized >> [ 0.467117] Key type asymmetric registered >> [ 0.467119] Asymmetric key parser 'x509' registered >> [ 0.467204] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) >> [ 0.467299] io scheduler mq-deadline registered >> [ 0.467301] io scheduler kyber registered >> [ 0.467357] io scheduler bfq registered >> [ 0.468354] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 >> [ 0.468472] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 >> [ 0.468506] ACPI: button: Power Button [PWRB] >> [ 0.468558] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 >> [ 0.470399] ACPI: button: Power Button [PWRF] >> [ 0.470470] ACPI: \_PR_.C000: Found 2 idle states >> [ 0.470564] ACPI: \_PR_.C001: Found 2 idle states >> [ 0.470635] ACPI: \_PR_.C002: Found 2 idle states >> [ 0.470712] ACPI: \_PR_.C003: Found 2 idle states >> [ 0.470792] ACPI: \_PR_.C004: Found 2 idle states >> [ 0.470863] ACPI: \_PR_.C005: Found 2 idle states >> [ 0.470937] ACPI: \_PR_.C006: Found 2 idle states >> [ 0.471006] ACPI: \_PR_.C007: Found 2 idle states >> [ 0.471398] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled >> [ 0.471585] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A >> [ 0.474648] Non-volatile memory driver v1.3 >> [ 0.474650] Linux agpgart interface v0.103 >> [ 0.474750] ACPI: bus type drm_connector registered >> [ 0.475607] ahci 0000:00:11.0: version 3.0 >> [ 0.475894] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode >> [ 0.475900] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) >> [ 0.475903] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc >> [ 0.476572] scsi host0: ahci >> [ 0.476799] scsi host1: ahci >> [ 0.476957] scsi host2: ahci >> [ 0.477175] scsi host3: ahci >> [ 0.477232] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 lpm-pol 3 >> [ 0.477236] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 lpm-pol 3 >> [ 0.477239] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 lpm-pol 3 >> [ 0.477242] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 lpm-pol 3 >> [ 0.477489] ohci-pci 0000:00:12.0: OHCI PCI host controller >> [ 0.477498] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 >> [ 0.477543] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000 >> [ 0.536033] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 >> [ 0.536046] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> [ 0.536053] usb usb1: Product: OHCI PCI host controller >> [ 0.536058] usb usb1: Manufacturer: Linux 6.9.2-arch1-1.2 ohci_hcd >> [ 0.536063] usb usb1: SerialNumber: 0000:00:12.0 >> [ 0.536600] hub 1-0:1.0: USB hub found >> [ 0.536614] hub 1-0:1.0: 3 ports detected >> [ 0.537585] ehci-pci 0000:00:12.2: EHCI Host Controller >> [ 0.537618] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 >> [ 0.537631] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround >> [ 0.537651] ehci-pci 0000:00:12.2: debug port 1 >> [ 0.537772] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000 >> [ 0.540855] Freeing initrd memory: 50848K >> [ 0.548534] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 >> [ 0.548672] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 >> [ 0.548675] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> [ 0.548677] usb usb2: Product: EHCI Host Controller >> [ 0.548679] usb usb2: Manufacturer: Linux 6.9.2-arch1-1.2 ehci_hcd >> [ 0.548680] usb usb2: SerialNumber: 0000:00:12.2 >> [ 0.548923] hub 2-0:1.0: USB hub found >> [ 0.548931] hub 2-0:1.0: 6 ports detected >> [ 0.615460] hub 1-0:1.0: USB hub found >> [ 0.615471] hub 1-0:1.0: 3 ports detected >> [ 0.615594] ehci-pci 0000:00:13.2: EHCI Host Controller >> [ 0.615599] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 >> [ 0.615603] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround >> [ 0.615614] ehci-pci 0000:00:13.2: debug port 1 >> [ 0.615676] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000 >> [ 0.628733] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 >> [ 0.628840] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 >> [ 0.628843] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> [ 0.628845] usb usb3: Product: EHCI Host Controller >> [ 0.628846] usb usb3: Manufacturer: Linux 6.9.2-arch1-1.2 ehci_hcd >> [ 0.628848] usb usb3: SerialNumber: 0000:00:13.2 >> [ 0.629065] hub 3-0:1.0: USB hub found >> [ 0.629079] hub 3-0:1.0: 6 ports detected >> [ 0.629268] ohci-pci 0000:00:12.1: OHCI PCI host controller >> [ 0.629273] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 >> [ 0.629292] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000 >> [ 0.689602] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 >> [ 0.689606] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> [ 0.689608] usb usb4: Product: OHCI PCI host controller >> [ 0.689610] usb usb4: Manufacturer: Linux 6.9.2-arch1-1.2 ohci_hcd >> [ 0.689611] usb usb4: SerialNumber: 0000:00:12.1 >> [ 0.689768] hub 4-0:1.0: USB hub found >> [ 0.689778] hub 4-0:1.0: 3 ports detected >> [ 0.690103] ohci-pci 0000:00:13.0: OHCI PCI host controller >> [ 0.690108] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 >> [ 0.690144] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000 >> [ 0.749775] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 >> [ 0.749779] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> [ 0.749782] usb usb5: Product: OHCI PCI host controller >> [ 0.749783] usb usb5: Manufacturer: Linux 6.9.2-arch1-1.2 ohci_hcd >> [ 0.749785] usb usb5: SerialNumber: 0000:00:13.0 >> [ 0.749940] hub 5-0:1.0: USB hub found >> [ 0.749949] hub 5-0:1.0: 3 ports detected >> [ 0.750237] ohci-pci 0000:00:13.1: OHCI PCI host controller >> [ 0.750246] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 >> [ 0.750266] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000 >> [ 0.794105] ata1: SATA link down (SStatus 0 SControl 300) >> [ 0.795664] ata4: SATA link down (SStatus 0 SControl 300) >> [ 0.800164] usb 2-1: new high-speed USB device number 2 using ehci-pci >> [ 0.809908] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 >> [ 0.809912] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> [ 0.809915] usb usb6: Product: OHCI PCI host controller >> [ 0.809916] usb usb6: Manufacturer: Linux 6.9.2-arch1-1.2 ohci_hcd >> [ 0.809918] usb usb6: SerialNumber: 0000:00:13.1 >> [ 0.810076] hub 6-0:1.0: USB hub found >> [ 0.810086] hub 6-0:1.0: 3 ports detected >> [ 0.810362] ohci-pci 0000:00:14.5: OHCI PCI host controller >> [ 0.810368] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 >> [ 0.810387] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000 >> [ 0.870052] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 >> [ 0.870056] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> [ 0.870058] usb usb7: Product: OHCI PCI host controller >> [ 0.870059] usb usb7: Manufacturer: Linux 6.9.2-arch1-1.2 ohci_hcd >> [ 0.870061] usb usb7: SerialNumber: 0000:00:14.5 >> [ 0.870224] hub 7-0:1.0: USB hub found >> [ 0.870233] hub 7-0:1.0: 2 ports detected >> [ 0.870434] usbcore: registered new interface driver usbserial_generic >> [ 0.870442] usbserial: USB Serial support registered for generic >> [ 0.870541] rtc_cmos 00:02: RTC can wake from S4 >> [ 0.870777] rtc_cmos 00:02: registered as rtc0 >> [ 0.870804] rtc_cmos 00:02: setting system clock to 2024-05-28T14:51:09 UTC (1716907869) >> [ 0.870840] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs >> [ 0.870893] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled >> [ 0.871046] ledtrig-cpu: registered to indicate activity on CPUs >> [ 0.871556] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0 >> [ 0.876504] Console: switching to colour frame buffer device 160x64 >> [ 0.880130] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device >> [ 0.880250] hid: raw HID events driver (C) Jiri Kosina >> [ 0.880368] drop_monitor: Initializing network drop monitor service >> [ 0.880708] NET: Registered PF_INET6 protocol family >> [ 0.888817] Segment Routing with IPv6 >> [ 0.888821] RPL Segment Routing with IPv6 >> [ 0.888841] In-situ OAM (IOAM) with IPv6 >> [ 0.888871] NET: Registered PF_PACKET protocol family >> [ 0.888928] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. >> [ 0.889431] microcode: Current revision: 0x06000852 >> [ 0.889434] microcode: Updated early from: 0x06000822 >> [ 0.889571] IPI shorthand broadcast: enabled >> [ 0.892436] sched_clock: Marking stable (892072218, -2517491)->(1803923840, -914369113) >> [ 0.892699] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level >> [ 0.892802] registered taskstats version 1 >> [ 0.893127] Loading compiled-in X.509 certificates >> [ 0.897827] Loaded X.509 cert 'Build time autogenerated kernel key: d8f226d306ee433c4f9e55c6647f7453aebee28a' >> [ 0.900456] Key type .fscrypt registered >> [ 0.900458] Key type fscrypt-provisioning registered >> [ 0.901003] PM: Magic number: 8:921:890 >> [ 0.904937] RAS: Correctable Errors collector initialized. >> [ 0.917594] clk: Disabling unused clocks >> [ 0.917598] PM: genpd: Disabling unused power domains >> [ 0.948241] usb 2-1: New USB device found, idVendor=0bda, idProduct=b812, bcdDevice= 2.10 >> [ 0.948246] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 >> [ 0.948248] usb 2-1: Product: USB3.0 802.11ac 1200M Adapter >> [ 0.948250] usb 2-1: Manufacturer: Realtek >> [ 0.948252] usb 2-1: SerialNumber: 123456 >> [ 0.957220] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> [ 0.957984] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> [ 0.958027] ata3.00: ATA-8: TOSHIBA HDWD110, MS2OA8J0, max UDMA/133 >> [ 0.958069] ata2.00: ATA-11: Apacer AS340 120GB, AP612PE0, max UDMA/133 >> [ 0.958100] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA >> [ 0.958298] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA >> [ 0.958709] ata2.00: configured for UDMA/133 >> [ 0.959337] ata3.00: configured for UDMA/133 >> [ 0.971555] scsi 1:0:0:0: Direct-Access ATA Apacer AS340 120 2PE0 PQ: 0 ANSI: 5 >> [ 0.972039] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) >> [ 0.972044] scsi 2:0:0:0: Direct-Access ATA TOSHIBA HDWD110 A8J0 PQ: 0 ANSI: 5 >> [ 0.972052] sd 1:0:0:0: [sda] Write Protect is off >> [ 0.972055] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 >> [ 0.972072] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >> [ 0.972104] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes >> [ 0.972382] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) >> [ 0.972385] sd 2:0:0:0: [sdb] 4096-byte physical blocks >> [ 0.972397] sd 2:0:0:0: [sdb] Write Protect is off >> [ 0.972400] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 >> [ 0.972418] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >> [ 0.972450] sd 2:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes >> [ 0.972747] sda: sda1 sda2 >> [ 0.972878] sd 1:0:0:0: [sda] Attached SCSI disk >> [ 0.979721] sdb: sdb1 sdb2 >> [ 0.979888] sd 2:0:0:0: [sdb] Attached SCSI disk >> [ 0.982113] Freeing unused decrypted memory: 2028K >> [ 0.982813] Freeing unused kernel image (initmem) memory: 3412K >> [ 0.982817] Write protecting the kernel read-only data: 32768k >> [ 0.983274] Freeing unused kernel image (rodata/data gap) memory: 1040K >> [ 1.024159] x86/mm: Checked W+X mappings: passed, no W+X pages found. >> [ 1.024163] rodata_test: all tests were successful >> [ 1.024167] Run /init as init process >> [ 1.024168] with arguments: >> [ 1.024169] /init >> [ 1.024171] with environment: >> [ 1.024171] HOME=/ >> [ 1.024172] TERM=linux >> [ 1.024173] BOOT_IMAGE=/vmlinuz-linux >> [ 1.192020] xhci_hcd 0000:02:00.0: xHCI Host Controller >> [ 1.192030] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 >> [ 1.192114] xhci_hcd 0000:02:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000890 >> [ 1.192303] xhci_hcd 0000:02:00.0: xHCI Host Controller >> [ 1.192309] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 >> [ 1.192314] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed >> [ 1.192427] scsi host4: pata_atiixp >> [ 1.192590] scsi host5: pata_atiixp >> [ 1.192637] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 lpm-pol 0 >> [ 1.192640] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 lpm-pol 0 >> [ 1.192805] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 >> [ 1.192810] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> [ 1.192812] usb usb8: Product: xHCI Host Controller >> [ 1.192814] usb usb8: Manufacturer: Linux 6.9.2-arch1-1.2 xhci-hcd >> [ 1.192816] usb usb8: SerialNumber: 0000:02:00.0 >> [ 1.192970] hub 8-0:1.0: USB hub found >> [ 1.192982] hub 8-0:1.0: 1 port detected >> [ 1.193137] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09 >> [ 1.193141] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> [ 1.193143] usb usb9: Product: xHCI Host Controller >> [ 1.193145] usb usb9: Manufacturer: Linux 6.9.2-arch1-1.2 xhci-hcd >> [ 1.193147] usb usb9: SerialNumber: 0000:02:00.0 >> [ 1.193622] hub 9-0:1.0: USB hub found >> [ 1.193636] hub 9-0:1.0: 4 ports detected >> [ 1.280961] usb 1-3: new low-speed USB device number 2 using ohci-pci >> [ 1.437586] usb 8-1: new high-speed USB device number 2 using xhci_hcd >> [ 1.454253] tsc: Refined TSC clocksource calibration: 3322.063 MHz >> [ 1.454279] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fe2b689782, max_idle_ns: 440795272807 ns >> [ 1.454361] clocksource: Switched to clocksource tsc >> [ 1.471291] usb 1-3: New USB device found, idVendor=0c45, idProduct=7603, bcdDevice= 1.06 >> [ 1.471296] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 >> [ 1.471298] usb 1-3: Product: USB Keyboard >> [ 1.494609] usbcore: registered new interface driver usbhid >> [ 1.494612] usbhid: USB HID core driver >> [ 1.500400] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.0/0003:0C45:7603.0001/input/input2 >> [ 1.554498] hid-generic 0003:0C45:7603.0001: input,hidraw0: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:12.0-3/input0 >> [ 1.554894] input: USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:0C45:7603.0002/input/input3 >> [ 1.578903] usb 8-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20 >> [ 1.578907] usb 8-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 >> [ 1.578909] usb 8-1: Product: USB2.0 Hub >> [ 1.579618] hub 8-1:1.0: USB hub found >> [ 1.579800] hub 8-1:1.0: 4 ports detected >> [ 1.611140] input: USB Keyboard System Control as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:0C45:7603.0002/input/input4 >> [ 1.611211] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:0C45:7603.0002/input/input6 >> [ 1.611349] hid-generic 0003:0C45:7603.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:12.0-3/input1 >> [ 2.100930] usb 4-1: new full-speed USB device number 2 using ohci-pci >> [ 2.295746] usb 4-1: New USB device found, idVendor=04d9, idProduct=a088, bcdDevice= 1.00 >> [ 2.295758] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 >> [ 2.295764] usb 4-1: Product: USB Gaming Mouse >> [ 2.295769] usb 4-1: Manufacturer: RH >> [ 2.303143] input: RH USB Gaming Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:04D9:A088.0003/input/input7 >> [ 2.358069] hid-generic 0003:04D9:A088.0003: input,hidraw2: USB HID v1.10 Keyboard [RH USB Gaming Mouse] on usb-0000:00:12.1-1/input0 >> [ 2.364463] input: RH USB Gaming Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:A088.0004/input/input8 >> [ 2.364541] input: RH USB Gaming Mouse System Control as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:A088.0004/input/input9 >> [ 2.421242] input: RH USB Gaming Mouse Consumer Control as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:A088.0004/input/input10 >> [ 2.421361] hid-generic 0003:04D9:A088.0004: input,hiddev97,hidraw3: USB HID v1.10 Mouse [RH USB Gaming Mouse] on usb-0000:00:12.1-1/input1 >> [ 2.425111] hid-generic 0003:04D9:A088.0005: hiddev98,hidraw4: USB HID v1.10 Device [RH USB Gaming Mouse] on usb-0000:00:12.1-1/input2 >> [ 2.964262] ata2.00: exception Emask 0x10 SAct 0x80 SErr 0x40d0002 action 0xe frozen >> [ 2.964274] ata2.00: irq_stat 0x00000040, connection status changed >> [ 2.964279] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 2.964288] ata2.00: failed command: READ FPDMA QUEUED >> [ 2.964291] ata2.00: cmd 60/08:38:80:ff:f1/00:00:0d:00:00/40 tag 7 ncq dma 4096 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 2.964307] ata2.00: status: { DRDY } >> [ 2.964318] ata2: hard resetting link >> [ 3.860936] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> [ 3.861698] ata2.00: configured for UDMA/133 >> [ 3.871801] sd 1:0:0:0: [sda] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s >> [ 3.871805] sd 1:0:0:0: [sda] tag#7 Sense Key : Illegal Request [current] >> [ 3.871808] sd 1:0:0:0: [sda] tag#7 Add. Sense: Unaligned write command >> [ 3.871810] sd 1:0:0:0: [sda] tag#7 CDB: Read(10) 28 00 0d f1 ff 80 00 00 08 00 >> [ 3.871812] I/O error, dev sda, sector 233963392 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 >> [ 3.871832] ata2: EH complete >> [ 4.047485] EXT4-fs (sda2): mounted filesystem 963daeed-0888-4658-9f17-18bd343dfb2a r/w with ordered data mode. Quota mode: none. >> [ 4.217266] systemd[1]: systemd 255.7-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified) >> [ 4.217273] systemd[1]: Detected architecture x86-64. >> [ 4.801003] systemd[1]: bpf-lsm: LSM BPF program attached >> [ 4.877584] ata2.00: exception Emask 0x10 SAct 0x80000000 SErr 0x40d0002 action 0xe frozen >> [ 4.877597] ata2.00: irq_stat 0x00000040, connection status changed >> [ 4.877601] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 4.877613] ata2.00: failed command: READ FPDMA QUEUED >> [ 4.877616] ata2.00: cmd 60/08:f8:50:f9:08/00:00:07:00:00/40 tag 31 ncq dma 4096 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 4.877632] ata2.00: status: { DRDY } >> [ 4.877639] ata2: hard resetting link >> [ 5.774299] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> [ 5.775081] ata2.00: configured for UDMA/133 >> [ 5.785188] ata2: EH complete >> [ 5.836831] systemd-fstab-generator[268]: Mount point is not a valid path, ignoring. >> [ 5.837835] systemd-fstab-generator[268]: Mount point is not a valid path, ignoring. >> [ 6.534243] random: crng init done >> [ 6.607583] ata2.00: exception Emask 0x10 SAct 0x6000000 SErr 0x40d0002 action 0xe frozen >> [ 6.607595] ata2.00: irq_stat 0x00000040, connection status changed >> [ 6.607600] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 6.607611] ata2.00: failed command: READ FPDMA QUEUED >> [ 6.607615] ata2.00: cmd 60/40:c8:28:3d:9c/00:00:01:00:00/40 tag 25 ncq dma 32768 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 6.607630] ata2.00: status: { DRDY } >> [ 6.607635] ata2.00: failed command: READ FPDMA QUEUED >> [ 6.607638] ata2.00: cmd 60/08:d0:30:04:ad/00:00:01:00:00/40 tag 26 ncq dma 4096 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 6.607652] ata2.00: status: { DRDY } >> [ 6.607660] ata2: hard resetting link >> [ 7.504453] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> [ 7.505241] ata2.00: configured for UDMA/133 >> [ 7.515397] sd 1:0:0:0: [sda] tag#25 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s >> [ 7.515401] sd 1:0:0:0: [sda] tag#25 Sense Key : Illegal Request [current] >> [ 7.515404] sd 1:0:0:0: [sda] tag#25 Add. Sense: Unaligned write command >> [ 7.515406] sd 1:0:0:0: [sda] tag#25 CDB: Read(10) 28 00 01 9c 3d 28 00 00 40 00 >> [ 7.515407] I/O error, dev sda, sector 27016488 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 >> [ 7.515417] sd 1:0:0:0: [sda] tag#26 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s >> [ 7.515419] sd 1:0:0:0: [sda] tag#26 Sense Key : Illegal Request [current] >> [ 7.515421] sd 1:0:0:0: [sda] tag#26 Add. Sense: Unaligned write command >> [ 7.515423] sd 1:0:0:0: [sda] tag#26 CDB: Read(10) 28 00 01 ad 04 30 00 00 08 00 >> [ 7.515424] I/O error, dev sda, sector 28116016 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 >> [ 7.515440] ata2: EH complete >> [ 7.529998] zram: Added device: zram0 >> [ 7.691188] systemd[1]: Queued start job for default target Graphical Interface. >> [ 7.725534] systemd[1]: Created slice Slice /system/dirmngr. >> [ 7.725909] systemd[1]: Created slice Slice /system/getty. >> [ 7.726235] systemd[1]: Created slice Slice /system/gpg-agent. >> [ 7.726555] systemd[1]: Created slice Slice /system/gpg-agent-browser. >> [ 7.726882] systemd[1]: Created slice Slice /system/gpg-agent-extra. >> [ 7.727202] systemd[1]: Created slice Slice /system/gpg-agent-ssh. >> [ 7.727571] systemd[1]: Created slice Slice /system/keyboxd. >> [ 7.727960] systemd[1]: Created slice Slice /system/modprobe. >> [ 7.728334] systemd[1]: Created slice Slice /system/systemd-fsck. >> [ 7.728726] systemd[1]: Created slice Slice /system/systemd-zram-setup. >> [ 7.729003] systemd[1]: Created slice User and Session Slice. >> [ 7.729063] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. >> [ 7.729108] systemd[1]: Started Forward Password Requests to Wall Directory Watch. >> [ 7.729268] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. >> [ 7.729287] systemd[1]: Expecting device /dev/disk/by-uuid/03ce297b-4be8-4886-953d-2d2cc4bd0862... >> [ 7.729295] systemd[1]: Expecting device /dev/disk/by-uuid/6BB1-1CFA... >> [ 7.729302] systemd[1]: Expecting device /dev/zram0... >> [ 7.729313] systemd[1]: Reached target Local Encrypted Volumes. >> [ 7.729329] systemd[1]: Reached target Local Integrity Protected Volumes. >> [ 7.729358] systemd[1]: Reached target Path Units. >> [ 7.729374] systemd[1]: Reached target Remote File Systems. >> [ 7.729384] systemd[1]: Reached target Slice Units. >> [ 7.729414] systemd[1]: Reached target Local Verity Protected Volumes. >> [ 7.729483] systemd[1]: Listening on Device-mapper event daemon FIFOs. >> [ 7.729825] systemd[1]: Listening on LVM2 poll daemon socket. >> [ 7.731601] systemd[1]: Listening on Process Core Dump Socket. >> [ 7.731717] systemd[1]: Listening on Journal Socket (/dev/log). >> [ 7.731826] systemd[1]: Listening on Journal Socket. >> [ 7.731962] systemd[1]: Listening on Network Service Netlink Socket. >> [ 7.731983] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). >> [ 7.732283] systemd[1]: Listening on udev Control Socket. >> [ 7.732367] systemd[1]: Listening on udev Kernel Socket. >> [ 7.733670] systemd[1]: Mounting Huge Pages File System... >> [ 7.734432] systemd[1]: Mounting POSIX Message Queue File System... >> [ 7.735214] systemd[1]: Mounting Kernel Debug File System... >> [ 7.735940] systemd[1]: Mounting Kernel Trace File System... >> [ 7.737094] systemd[1]: Starting Create List of Static Device Nodes... >> [ 7.738109] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... >> [ 7.739275] systemd[1]: Starting Load Kernel Module configfs... >> [ 7.741004] systemd[1]: Starting Load Kernel Module dm_mod... >> [ 7.743396] systemd[1]: Starting Load Kernel Module drm... >> [ 7.744638] systemd[1]: Starting Load Kernel Module fuse... >> [ 7.745618] systemd[1]: Starting Load Kernel Module loop... >> [ 7.745672] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). >> [ 7.747541] systemd[1]: Starting Journal Service... >> [ 7.749286] systemd[1]: Starting Load Kernel Modules... >> [ 7.750456] systemd[1]: Starting Generate network units from Kernel command line... >> [ 7.750488] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). >> [ 7.752304] systemd[1]: Starting Remount Root and Kernel File Systems... >> [ 7.752407] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). >> [ 7.753791] systemd[1]: Starting Coldplug All udev Devices... >> [ 7.755944] systemd[1]: Mounted Huge Pages File System. >> [ 7.756096] systemd[1]: Mounted POSIX Message Queue File System. >> [ 7.756210] systemd[1]: Mounted Kernel Debug File System. >> [ 7.756338] systemd[1]: Mounted Kernel Trace File System. >> [ 7.756613] systemd[1]: Finished Create List of Static Device Nodes. >> [ 7.757040] systemd[1]: modprobe@configfs.service: Deactivated successfully. >> [ 7.757405] systemd[1]: Finished Load Kernel Module configfs. >> [ 7.757836] systemd[1]: modprobe@drm.service: Deactivated successfully. >> [ 7.760195] systemd[1]: Finished Load Kernel Module drm. >> [ 7.760583] systemd[1]: modprobe@fuse.service: Deactivated successfully. >> [ 7.760775] systemd[1]: Finished Load Kernel Module fuse. >> [ 7.763032] systemd[1]: Mounting FUSE Control File System... >> [ 7.764696] systemd[1]: Mounting Kernel Configuration File System... >> [ 7.765008] loop: module loaded >> [ 7.765817] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... >> [ 7.766294] systemd[1]: modprobe@loop.service: Deactivated successfully. >> [ 7.766508] systemd[1]: Finished Load Kernel Module loop. >> [ 7.766833] systemd[1]: Finished Generate network units from Kernel command line. >> [ 7.773114] device-mapper: uevent: version 1.0.3 >> [ 7.773226] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@xxxxxxxxxxxxxxx >> [ 7.773364] systemd[1]: Mounted FUSE Control File System. >> [ 7.773500] systemd[1]: Mounted Kernel Configuration File System. >> [ 7.773999] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. >> [ 7.774199] systemd[1]: Finished Load Kernel Module dm_mod. >> [ 7.774797] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met. >> [ 7.777678] sd 1:0:0:0: Attached scsi generic sg0 type 0 >> [ 7.777730] sd 2:0:0:0: Attached scsi generic sg1 type 0 >> [ 7.782295] systemd-journald[292]: Collecting audit messages is disabled. >> [ 7.789658] Asymmetric key parser 'pkcs8' registered >> [ 7.790664] systemd[1]: Finished Load Kernel Modules. >> [ 7.791862] systemd[1]: Starting Apply Kernel Variables... >> [ 7.797660] EXT4-fs (sda2): re-mounted 963daeed-0888-4658-9f17-18bd343dfb2a r/w. Quota mode: none. >> [ 7.798776] systemd[1]: Finished Remount Root and Kernel File Systems. >> [ 7.799828] systemd[1]: Rebuild Hardware Database was skipped because no trigger condition checks were met. >> [ 7.800904] systemd[1]: Starting Load/Save OS Random Seed... >> [ 7.800930] systemd[1]: TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). >> [ 7.806934] systemd[1]: Finished Apply Kernel Variables. >> [ 7.820293] systemd[1]: Finished Load/Save OS Random Seed. >> [ 7.822716] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. >> [ 7.823917] systemd[1]: Starting Create System Users... >> [ 7.853147] systemd[1]: Finished Create System Users. >> [ 7.854285] systemd[1]: Starting Create Static Device Nodes in /dev... >> [ 7.854815] systemd[1]: Started Journal Service. >> [ 7.866721] systemd-journald[292]: Received client request to flush runtime journal. >> [ 7.876074] systemd-journald[292]: /var/log/journal/ca3d73a04dc345538c9904a96756e41e/system.journal: Journal file uses a different sequence number ID, rotating. >> [ 7.876080] systemd-journald[292]: Rotating system journal. >> [ 8.006678] zram0: detected capacity change from 0 to 8388608 >> [ 8.056885] mousedev: PS/2 mouse device common for all mice >> [ 8.058328] parport_pc 00:04: reported by Plug and Play ACPI >> [ 8.060958] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] >> [ 8.090400] input: PC Speaker as /devices/platform/pcspkr/input/input12 >> [ 8.090811] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20230628/utaddress-204) >> [ 8.090837] ACPI: OSL: Resource conflict; ACPI support missing from driver? >> [ 8.093857] cryptd: max_cpu_qlen set to 1000 >> [ 8.095908] acpi_cpufreq: overriding BIOS provided _PSD data >> [ 8.099121] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver >> [ 8.099423] sp5100-tco sp5100-tco: Failed to reserve MMIO or alternate MMIO region >> [ 8.099428] sp5100-tco sp5100-tco: probe with driver sp5100-tco failed with error -16 >> [ 8.123581] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control >> [ 8.123771] AVX version of gcm_enc/dec engaged. >> [ 8.123835] AES CTR mode by8 optimization enabled >> [ 8.147638] r8169 0000:03:00.0 eth0: RTL8168g/8111g, e0:d5:5e:3b:15:1f, XID 4c0, IRQ 28 >> [ 8.147648] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] >> [ 8.153349] r8169 0000:03:00.0 enp3s0: renamed from eth0 >> [ 8.188043] ppdev: user-space parallel port driver >> [ 8.193397] Adding 4194300k swap on /dev/zram0. Priority:100 extents:1 across:4194300k SSDsc >> [ 8.198244] snd_hda_intel 0000:01:00.1: Disabling MSI >> [ 8.198265] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client >> [ 8.226060] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13 >> [ 8.226734] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14 >> [ 8.226821] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15 >> [ 8.226880] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16 >> [ 8.241879] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line >> [ 8.241886] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) >> [ 8.241889] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) >> [ 8.241891] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 >> [ 8.241893] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0 >> [ 8.241895] snd_hda_codec_realtek hdaudioC0D0: inputs: >> [ 8.241897] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 >> [ 8.241899] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 >> [ 8.241901] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a >> [ 8.321663] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 >> [ 8.321807] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input18 >> [ 8.321864] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input19 >> [ 8.321932] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input20 >> [ 8.321994] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input21 >> [ 8.376761] kvm_amd: TSC scaling supported >> [ 8.376766] kvm_amd: Nested Virtualization enabled >> [ 8.376768] kvm_amd: Nested Paging enabled >> [ 8.376774] kvm_amd: LBR virtualization supported >> [ 8.916596] EXT4-fs (sdb1): mounted filesystem 03ce297b-4be8-4886-953d-2d2cc4bd0862 r/w with ordered data mode. Quota mode: none. >> [ 9.007654] ata2: limiting SATA link speed to 1.5 Gbps >> [ 9.007664] ata2.00: exception Emask 0x10 SAct 0x200000 SErr 0x40d0002 action 0xe frozen >> [ 9.007671] ata2.00: irq_stat 0x00000040, connection status changed >> [ 9.007676] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 9.007685] ata2.00: failed command: READ FPDMA QUEUED >> [ 9.007689] ata2.00: cmd 60/08:a8:78:9f:ae/00:00:02:00:00/40 tag 21 ncq dma 4096 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 9.007704] ata2.00: status: { DRDY } >> [ 9.007713] ata2: hard resetting link >> [ 9.904302] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 9.905397] ata2.00: configured for UDMA/133 >> [ 9.915594] sd 1:0:0:0: [sda] tag#21 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s >> [ 9.915606] sd 1:0:0:0: [sda] tag#21 Sense Key : Illegal Request [current] >> [ 9.915613] sd 1:0:0:0: [sda] tag#21 Add. Sense: Unaligned write command >> [ 9.915620] sd 1:0:0:0: [sda] tag#21 CDB: Read(10) 28 00 02 ae 9f 78 00 00 08 00 >> [ 9.915624] I/O error, dev sda, sector 44998520 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 >> [ 9.915657] ata2: EH complete >> [ 10.864909] NET: Registered PF_ALG protocol family >> [ 10.960863] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC) >> [ 11.157627] r8169 0000:03:00.0 enp3s0: Link is Down >> [ 14.170915] ata2.00: exception Emask 0x10 SAct 0x10000000 SErr 0x40d0002 action 0xe frozen >> [ 14.170929] ata2.00: irq_stat 0x00000040, connection status changed >> [ 14.170934] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 14.170945] ata2.00: failed command: READ FPDMA QUEUED >> [ 14.170949] ata2.00: cmd 60/00:e0:00:39:7f/0a:00:01:00:00/40 tag 28 ncq dma 1310720 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 14.170964] ata2.00: status: { DRDY } >> [ 14.170973] ata2: hard resetting link >> [ 15.067652] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 15.068694] ata2.00: configured for UDMA/133 >> [ 15.078850] sd 1:0:0:0: [sda] tag#28 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s >> [ 15.078861] sd 1:0:0:0: [sda] tag#28 Sense Key : Illegal Request [current] >> [ 15.078868] sd 1:0:0:0: [sda] tag#28 Add. Sense: Unaligned write command >> [ 15.078875] sd 1:0:0:0: [sda] tag#28 CDB: Read(10) 28 00 01 7f 39 00 00 0a 00 00 >> [ 15.078879] I/O error, dev sda, sector 25114880 op 0x0:(READ) flags 0x80700 phys_seg 36 prio class 0 >> [ 15.078930] ata2: EH complete >> [ 15.660926] ata2.00: exception Emask 0x10 SAct 0x10000000 SErr 0x40d0002 action 0xe frozen >> [ 15.660939] ata2.00: irq_stat 0x00000040, connection status changed >> [ 15.660944] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 15.660955] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 15.660959] ata2.00: cmd 61/10:e0:08:97:a2/00:00:08:00:00/40 tag 28 ncq dma 8192 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 15.660974] ata2.00: status: { DRDY } >> [ 15.660982] ata2: hard resetting link >> [ 16.557602] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 16.558620] ata2.00: configured for UDMA/133 >> [ 16.568804] ata2: EH complete >> [ 17.220916] ata2.00: exception Emask 0x10 SAct 0x8000 SErr 0x40d0002 action 0xe frozen >> [ 17.220930] ata2.00: irq_stat 0x00000040, connection status changed >> [ 17.220934] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 17.220944] ata2.00: failed command: READ FPDMA QUEUED >> [ 17.220947] ata2.00: cmd 60/10:78:48:a8:04/00:00:0b:00:00/40 tag 15 ncq dma 8192 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 17.220963] ata2.00: status: { DRDY } >> [ 17.220972] ata2: hard resetting link >> [ 18.117578] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 18.118584] ata2.00: configured for UDMA/133 >> [ 18.128737] sd 1:0:0:0: [sda] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=1s >> [ 18.128748] sd 1:0:0:0: [sda] tag#15 Sense Key : Illegal Request [current] >> [ 18.128755] sd 1:0:0:0: [sda] tag#15 Add. Sense: Unaligned write command >> [ 18.128761] sd 1:0:0:0: [sda] tag#15 CDB: Read(10) 28 00 0b 04 a8 48 00 00 10 00 >> [ 18.128765] I/O error, dev sda, sector 184854600 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0 >> [ 18.128798] ata2: EH complete >> [ 18.298855] systemd-journald[292]: /var/log/journal/ca3d73a04dc345538c9904a96756e41e/user-1000.journal: Journal file uses a different sequence number ID, rotating. >> [ 20.120927] ata2.00: limiting speed to UDMA/100:PIO4 >> [ 20.120938] ata2.00: exception Emask 0x10 SAct 0x100 SErr 0x40d0002 action 0xe frozen >> [ 20.120945] ata2.00: irq_stat 0x00000040, connection status changed >> [ 20.120949] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 20.120958] ata2.00: failed command: READ FPDMA QUEUED >> [ 20.120961] ata2.00: cmd 60/08:40:90:f8:87/00:00:04:00:00/40 tag 8 ncq dma 4096 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 20.120976] ata2.00: status: { DRDY } >> [ 20.120987] ata2: hard resetting link >> [ 21.017651] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 21.018696] ata2.00: configured for UDMA/100 >> [ 21.028886] ata2: EH complete >> [ 21.494246] ata2.00: exception Emask 0x10 SAct 0x100000 SErr 0x40d0002 action 0xe frozen >> [ 21.494258] ata2.00: irq_stat 0x00000040, connection status changed >> [ 21.494263] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 21.494273] ata2.00: failed command: READ FPDMA QUEUED >> [ 21.494277] ata2.00: cmd 60/00:a0:60:07:49/01:00:02:00:00/40 tag 20 ncq dma 131072 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 21.494292] ata2.00: status: { DRDY } >> [ 21.494300] ata2: hard resetting link >> [ 22.390924] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 22.391922] ata2.00: configured for UDMA/100 >> [ 22.402072] sd 1:0:0:0: [sda] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s >> [ 22.402083] sd 1:0:0:0: [sda] tag#20 Sense Key : Illegal Request [current] >> [ 22.402090] sd 1:0:0:0: [sda] tag#20 Add. Sense: Unaligned write command >> [ 22.402097] sd 1:0:0:0: [sda] tag#20 CDB: Read(10) 28 00 02 49 07 60 00 01 00 00 >> [ 22.402101] I/O error, dev sda, sector 38340448 op 0x0:(READ) flags 0x80700 phys_seg 27 prio class 0 >> [ 22.402136] ata2: EH complete >> [ 23.767592] ata2.00: exception Emask 0x10 SAct 0x40040 SErr 0x40d0002 action 0xe frozen >> [ 23.767604] ata2.00: irq_stat 0x00000040, connection status changed >> [ 23.767609] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 23.767617] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 23.767621] ata2.00: cmd 61/08:30:e0:36:cf/00:00:01:00:00/40 tag 6 ncq dma 4096 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 23.767636] ata2.00: status: { DRDY } >> [ 23.767643] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 23.767646] ata2.00: cmd 61/08:90:e8:03:40/00:00:02:00:00/40 tag 18 ncq dma 4096 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 23.767660] ata2.00: status: { DRDY } >> [ 23.767668] ata2: hard resetting link >> [ 24.664348] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 24.665434] ata2.00: configured for UDMA/100 >> [ 24.675629] ata2: EH complete >> [ 25.267591] ata2.00: exception Emask 0x10 SAct 0xe000 SErr 0x40d0002 action 0xe frozen >> [ 25.267605] ata2.00: irq_stat 0x00000040, connection status changed >> [ 25.267610] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 25.267619] ata2.00: failed command: READ FPDMA QUEUED >> [ 25.267623] ata2.00: cmd 60/68:68:a8:a9:50/00:00:05:00:00/40 tag 13 ncq dma 53248 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 25.267638] ata2.00: status: { DRDY } >> [ 25.267643] ata2.00: failed command: READ FPDMA QUEUED >> [ 25.267647] ata2.00: cmd 60/b0:70:08:ac:50/02:00:05:00:00/40 tag 14 ncq dma 352256 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 25.267662] ata2.00: status: { DRDY } >> [ 25.267666] ata2.00: failed command: READ FPDMA QUEUED >> [ 25.267670] ata2.00: cmd 60/f0:78:b8:af:50/03:00:05:00:00/40 tag 15 ncq dma 516096 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 25.267683] ata2.00: status: { DRDY } >> [ 25.267691] ata2: hard resetting link >> [ 26.164282] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 26.165271] ata2.00: configured for UDMA/100 >> [ 26.175428] sd 1:0:0:0: [sda] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s >> [ 26.175439] sd 1:0:0:0: [sda] tag#13 Sense Key : Illegal Request [current] >> [ 26.175446] sd 1:0:0:0: [sda] tag#13 Add. Sense: Unaligned write command >> [ 26.175453] sd 1:0:0:0: [sda] tag#13 CDB: Read(10) 28 00 05 50 a9 a8 00 00 68 00 >> [ 26.175457] I/O error, dev sda, sector 89172392 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 0 >> [ 26.175501] sd 1:0:0:0: [sda] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s >> [ 26.175508] sd 1:0:0:0: [sda] tag#14 Sense Key : Illegal Request [current] >> [ 26.175513] sd 1:0:0:0: [sda] tag#14 Add. Sense: Unaligned write command >> [ 26.175519] sd 1:0:0:0: [sda] tag#14 CDB: Read(10) 28 00 05 50 ac 08 00 02 b0 00 >> [ 26.175522] I/O error, dev sda, sector 89173000 op 0x0:(READ) flags 0x80700 phys_seg 86 prio class 0 >> [ 26.175547] sd 1:0:0:0: [sda] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s >> [ 26.175555] sd 1:0:0:0: [sda] tag#15 Sense Key : Illegal Request [current] >> [ 26.175562] sd 1:0:0:0: [sda] tag#15 Add. Sense: Unaligned write command >> [ 26.175569] sd 1:0:0:0: [sda] tag#15 CDB: Read(10) 28 00 05 50 af b8 00 03 f0 00 >> [ 26.175575] I/O error, dev sda, sector 89173944 op 0x0:(READ) flags 0x80700 phys_seg 126 prio class 0 >> [ 26.175596] ata2: EH complete >> [ 26.520926] ata2.00: limiting speed to UDMA/33:PIO4 >> [ 26.520936] ata2.00: exception Emask 0x10 SAct 0x8000 SErr 0x40d0002 action 0xe frozen >> [ 26.520943] ata2.00: irq_stat 0x00000040, connection status changed >> [ 26.520948] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 26.520957] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 26.520960] ata2.00: cmd 61/20:78:98:78:d0/00:00:06:00:00/40 tag 15 ncq dma 16384 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 26.520976] ata2.00: status: { DRDY } >> [ 26.520984] ata2: hard resetting link >> [ 27.417761] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 27.418764] ata2.00: configured for UDMA/33 >> [ 27.428954] ata2: EH complete >> [ 32.727577] ata2.00: exception Emask 0x10 SAct 0x800000 SErr 0x40d0002 action 0xe frozen >> [ 32.727589] ata2.00: irq_stat 0x00000040, connection status changed >> [ 32.727594] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 32.727604] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 32.727607] ata2.00: cmd 61/18:b8:c0:78:d0/00:00:06:00:00/40 tag 23 ncq dma 12288 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 32.727622] ata2.00: status: { DRDY } >> [ 32.727631] ata2: hard resetting link >> [ 33.624294] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 33.625331] ata2.00: configured for UDMA/33 >> [ 33.635482] ata2: EH complete >> [ 38.700920] ata2.00: exception Emask 0x10 SAct 0x1000000 SErr 0x40d0002 action 0xe frozen >> [ 38.700933] ata2.00: irq_stat 0x00000040, connection status changed >> [ 38.700938] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 38.700949] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 38.700952] ata2.00: cmd 61/18:c0:e0:78:d0/00:00:06:00:00/40 tag 24 ncq dma 12288 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 38.700967] ata2.00: status: { DRDY } >> [ 38.700976] ata2: hard resetting link >> [ 39.597747] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 39.598795] ata2.00: configured for UDMA/33 >> [ 39.608942] ata2: EH complete >> [ 40.270908] ata2.00: exception Emask 0x10 SAct 0x80000 SErr 0x40d0002 action 0xe frozen >> [ 40.270921] ata2.00: irq_stat 0x00000040, connection status changed >> [ 40.270925] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 40.270935] ata2.00: failed command: READ FPDMA QUEUED >> [ 40.270939] ata2.00: cmd 60/00:98:40:9b:86/01:00:06:00:00/40 tag 19 ncq dma 131072 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 40.270954] ata2.00: status: { DRDY } >> [ 40.270963] ata2: hard resetting link >> [ 41.167649] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 41.168644] ata2.00: configured for UDMA/33 >> [ 41.178795] sd 1:0:0:0: [sda] tag#19 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s >> [ 41.178806] sd 1:0:0:0: [sda] tag#19 Sense Key : Illegal Request [current] >> [ 41.178813] sd 1:0:0:0: [sda] tag#19 Add. Sense: Unaligned write command >> [ 41.178819] sd 1:0:0:0: [sda] tag#19 CDB: Read(10) 28 00 06 86 9b 40 00 01 00 00 >> [ 41.178823] I/O error, dev sda, sector 109484864 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0 >> [ 41.178856] ata2: EH complete >> [ 44.674255] ata2.00: exception Emask 0x10 SAct 0x3 SErr 0x40d0002 action 0xe frozen >> [ 44.674268] ata2.00: irq_stat 0x00000040, connection status changed >> [ 44.674273] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 44.674281] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 44.674285] ata2.00: cmd 61/08:00:00:79:d0/00:00:06:00:00/40 tag 0 ncq dma 4096 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 44.674300] ata2.00: status: { DRDY } >> [ 44.674305] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 44.674308] ata2.00: cmd 61/50:08:08:79:d0/00:00:06:00:00/40 tag 1 ncq dma 40960 out >> res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 44.674322] ata2.00: status: { DRDY } >> [ 44.674332] ata2: hard resetting link >> [ 45.570935] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 45.571973] ata2.00: configured for UDMA/33 >> [ 45.582165] ata2: EH complete >> [ 46.387598] ata2.00: exception Emask 0x10 SAct 0x2000 SErr 0x40d0002 action 0xe frozen >> [ 46.387612] ata2.00: irq_stat 0x00000040, connection status changed >> [ 46.387617] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 46.387626] ata2.00: failed command: READ FPDMA QUEUED >> [ 46.387630] ata2.00: cmd 60/40:68:c0:65:7f/02:00:01:00:00/40 tag 13 ncq dma 294912 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 46.387646] ata2.00: status: { DRDY } >> [ 46.387655] ata2: hard resetting link >> [ 47.284289] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 47.285281] ata2.00: configured for UDMA/33 >> [ 47.295485] sd 1:0:0:0: [sda] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s >> [ 47.295497] sd 1:0:0:0: [sda] tag#13 Sense Key : Illegal Request [current] >> [ 47.295504] sd 1:0:0:0: [sda] tag#13 Add. Sense: Unaligned write command >> [ 47.295510] sd 1:0:0:0: [sda] tag#13 CDB: Read(10) 28 00 01 7f 65 c0 00 02 40 00 >> [ 47.295514] I/O error, dev sda, sector 25126336 op 0x0:(READ) flags 0x80700 phys_seg 59 prio class 0 >> [ 47.295555] ata2: EH complete >> [ 48.940920] ata2.00: exception Emask 0x10 SAct 0x78000 SErr 0x40d0002 action 0xe frozen >> [ 48.940933] ata2.00: irq_stat 0x00000040, connection status changed >> [ 48.940937] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 48.940947] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 48.940950] ata2.00: cmd 61/f8:78:08:a4:c0/01:00:09:00:00/40 tag 15 ncq dma 258048 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 48.940965] ata2.00: status: { DRDY } >> [ 48.940970] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 48.940973] ata2.00: cmd 61/d8:80:00:f8:c1/01:00:09:00:00/40 tag 16 ncq dma 241664 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 48.940987] ata2.00: status: { DRDY } >> [ 48.940992] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 48.940995] ata2.00: cmd 61/08:88:00:18:a1/00:00:01:00:00/40 tag 17 ncq dma 4096 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 48.941008] ata2.00: status: { DRDY } >> [ 48.941012] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 48.941015] ata2.00: cmd 61/08:90:08:18:a1/00:00:01:00:00/40 tag 18 ncq dma 4096 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 48.941028] ata2.00: status: { DRDY } >> [ 48.941035] ata2: hard resetting link >> [ 49.837603] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 49.838650] ata2.00: configured for UDMA/33 >> [ 49.848795] ata2: EH complete >> [ 50.860925] ata2.00: exception Emask 0x10 SAct 0xff0000 SErr 0x40d0002 action 0xe frozen >> [ 50.860939] ata2.00: irq_stat 0x00000040, connection status changed >> [ 50.860944] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 50.860953] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 50.860957] ata2.00: cmd 61/08:80:10:f8:07/00:00:00:00:00/40 tag 16 ncq dma 4096 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 50.860973] ata2.00: status: { DRDY } >> [ 50.860978] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 50.860981] ata2.00: cmd 61/08:88:48:1b:09/00:00:00:00:00/40 tag 17 ncq dma 4096 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 50.860995] ata2.00: status: { DRDY } >> [ 50.860999] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 50.861002] ata2.00: cmd 61/08:90:18:1c:09/00:00:00:00:00/40 tag 18 ncq dma 4096 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 50.861015] ata2.00: status: { DRDY } >> [ 50.861020] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 50.861023] ata2.00: cmd 61/08:98:00:f8:c7/00:00:01:00:00/40 tag 19 ncq dma 4096 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 50.861035] ata2.00: status: { DRDY } >> [ 50.861039] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 50.861043] ata2.00: cmd 61/08:a0:80:f8:c7/00:00:01:00:00/40 tag 20 ncq dma 4096 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 50.861055] ata2.00: status: { DRDY } >> [ 50.861059] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 50.861062] ata2.00: cmd 61/08:a8:a0:f9:c7/00:00:01:00:00/40 tag 21 ncq dma 4096 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 50.861075] ata2.00: status: { DRDY } >> [ 50.861079] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 50.861082] ata2.00: cmd 61/08:b0:c8:fd:c7/00:00:01:00:00/40 tag 22 ncq dma 4096 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 50.861094] ata2.00: status: { DRDY } >> [ 50.861098] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 50.861101] ata2.00: cmd 61/08:b8:b8:f9:c8/00:00:01:00:00/40 tag 23 ncq dma 4096 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 50.861114] ata2.00: status: { DRDY } >> [ 50.861121] ata2: hard resetting link >> [ 51.757643] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 51.758674] ata2.00: configured for UDMA/33 >> [ 51.768836] ata2: EH complete >> [ 0.000000] Linux version 6.10.0-rc1-1.1-mainline (linux-mainline@archlinux) (gcc (GCC) 14.1.1 20240522, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Mon, 27 May 2024 19:28:34 +0000 >> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-mainline root=UUID=963daeed-0888-4658-9f17-18bd343dfb2a rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet >> [ 0.000000] BIOS-provided physical RAM map: >> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable >> [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved >> [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved >> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfdeffff] usable >> [ 0.000000] BIOS-e820: [mem 0x00000000bfdf0000-0x00000000bfdf2fff] ACPI NVS >> [ 0.000000] BIOS-e820: [mem 0x00000000bfdf3000-0x00000000bfdfffff] ACPI data >> [ 0.000000] BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfefffff] reserved >> [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved >> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved >> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable >> [ 0.000000] NX (Execute Disable) protection: active >> [ 0.000000] APIC: Static calls initialized >> [ 0.000000] SMBIOS 2.4 present. >> [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-78LMT-USB3 R2/GA-78LMT-USB3 R2, BIOS F1 11/08/2017 >> [ 0.000000] DMI: Memory slots populated: 2/4 >> [ 0.000000] tsc: Fast TSC calibration using PIT >> [ 0.000000] tsc: Detected 3321.904 MHz processor >> [ 0.002898] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved >> [ 0.002902] e820: remove [mem 0x000a0000-0x000fffff] usable >> [ 0.002908] last_pfn = 0x43f000 max_arch_pfn = 0x400000000 >> [ 0.002917] total RAM covered: 3070M >> [ 0.003218] Found optimal setting for mtrr clean up >> [ 0.003219] gran_size: 64K chunk_size: 4M num_reg: 3 lose cover RAM: 0G >> [ 0.003224] MTRR map: 7 entries (4 fixed + 3 variable; max 21), built from 9 variable MTRRs >> [ 0.003226] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT >> [ 0.004086] e820: update [mem 0xbfe00000-0xffffffff] usable ==> reserved >> [ 0.004096] last_pfn = 0xbfdf0 max_arch_pfn = 0x400000000 >> [ 0.006997] found SMP MP-table at [mem 0x000f5ea0-0x000f5eaf] >> [ 0.007018] Using GB pages for direct mapping >> [ 0.007298] RAMDISK: [mem 0x31cc3000-0x34e58fff] >> [ 0.007401] ACPI: Early table checksum verification disabled >> [ 0.007406] ACPI: RSDP 0x00000000000F78B0 000014 (v00 GBT ) >> [ 0.007411] ACPI: RSDT 0x00000000BFDF3000 000040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) >> [ 0.007417] ACPI: FACP 0x00000000BFDF3080 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) >> [ 0.007423] ACPI: DSDT 0x00000000BFDF3100 0069E7 (v01 GBT GBTUACPI 00001000 MSFT 03000000) >> [ 0.007427] ACPI: FACS 0x00000000BFDF0000 000040 >> [ 0.007431] ACPI: MSDM 0x00000000BFDF9BC0 000055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101) >> [ 0.007435] ACPI: HPET 0x00000000BFDF9C40 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) >> [ 0.007438] ACPI: MCFG 0x00000000BFDF9C80 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) >> [ 0.007442] ACPI: TAMG 0x00000000BFDF9CC0 000022 (v01 GBT GBT B0 5455312E BG?? 00000101) >> [ 0.007446] ACPI: APIC 0x00000000BFDF9B00 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) >> [ 0.007450] ACPI: SSDT 0x00000000BFDF9D60 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) >> [ 0.007453] ACPI: Reserving FACP table memory at [mem 0xbfdf3080-0xbfdf30f3] >> [ 0.007454] ACPI: Reserving DSDT table memory at [mem 0xbfdf3100-0xbfdf9ae6] >> [ 0.007456] ACPI: Reserving FACS table memory at [mem 0xbfdf0000-0xbfdf003f] >> [ 0.007457] ACPI: Reserving MSDM table memory at [mem 0xbfdf9bc0-0xbfdf9c14] >> [ 0.007458] ACPI: Reserving HPET table memory at [mem 0xbfdf9c40-0xbfdf9c77] >> [ 0.007459] ACPI: Reserving MCFG table memory at [mem 0xbfdf9c80-0xbfdf9cbb] >> [ 0.007460] ACPI: Reserving TAMG table memory at [mem 0xbfdf9cc0-0xbfdf9ce1] >> [ 0.007462] ACPI: Reserving APIC table memory at [mem 0xbfdf9b00-0xbfdf9bbb] >> [ 0.007463] ACPI: Reserving SSDT table memory at [mem 0xbfdf9d60-0xbfdfb473] >> [ 0.007526] No NUMA configuration found >> [ 0.007527] Faking a node at [mem 0x0000000000000000-0x000000043effffff] >> [ 0.007531] NODE_DATA(0) allocated [mem 0x43effb000-0x43effffff] >> [ 0.007572] Zone ranges: >> [ 0.007572] DMA [mem 0x0000000000001000-0x0000000000ffffff] >> [ 0.007575] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] >> [ 0.007576] Normal [mem 0x0000000100000000-0x000000043effffff] >> [ 0.007578] Device empty >> [ 0.007579] Movable zone start for each node >> [ 0.007580] Early memory node ranges >> [ 0.007581] node 0: [mem 0x0000000000001000-0x000000000009efff] >> [ 0.007583] node 0: [mem 0x0000000000100000-0x00000000bfdeffff] >> [ 0.007584] node 0: [mem 0x0000000100000000-0x000000043effffff] >> [ 0.007587] Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff] >> [ 0.007593] On node 0, zone DMA: 1 pages in unavailable ranges >> [ 0.007635] On node 0, zone DMA: 97 pages in unavailable ranges >> [ 0.055259] On node 0, zone Normal: 528 pages in unavailable ranges >> [ 0.055335] On node 0, zone Normal: 4096 pages in unavailable ranges >> [ 0.055516] ACPI: PM-Timer IO Port: 0x4008 >> [ 0.055528] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) >> [ 0.055530] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) >> [ 0.055531] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) >> [ 0.055533] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) >> [ 0.055534] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) >> [ 0.055535] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) >> [ 0.055536] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) >> [ 0.055537] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) >> [ 0.055549] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 >> [ 0.055552] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> [ 0.055555] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) >> [ 0.055559] ACPI: Using ACPI (MADT) for SMP configuration information >> [ 0.055561] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 >> [ 0.055570] CPU topo: Max. logical packages: 1 >> [ 0.055572] CPU topo: Max. logical dies: 1 >> [ 0.055573] CPU topo: Max. dies per package: 1 >> [ 0.055578] CPU topo: Max. threads per core: 1 >> [ 0.055579] CPU topo: Num. cores per package: 8 >> [ 0.055580] CPU topo: Num. threads per package: 8 >> [ 0.055580] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs >> [ 0.055593] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] >> [ 0.055595] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] >> [ 0.055596] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff] >> [ 0.055598] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff] >> [ 0.055599] PM: hibernation: Registered nosave memory: [mem 0xbfdf0000-0xbfdf2fff] >> [ 0.055600] PM: hibernation: Registered nosave memory: [mem 0xbfdf3000-0xbfdfffff] >> [ 0.055601] PM: hibernation: Registered nosave memory: [mem 0xbfe00000-0xbfefffff] >> [ 0.055602] PM: hibernation: Registered nosave memory: [mem 0xbff00000-0xdfffffff] >> [ 0.055603] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] >> [ 0.055604] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfebfffff] >> [ 0.055605] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xffffffff] >> [ 0.055608] [mem 0xbff00000-0xdfffffff] available for PCI devices >> [ 0.055609] Booting paravirtualized kernel on bare hardware >> [ 0.055612] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns >> [ 0.061591] setup_percpu: NR_CPUS:320 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 >> [ 0.062566] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288 >> [ 0.062574] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152 >> [ 0.062578] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 >> [ 0.062599] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-mainline root=UUID=963daeed-0888-4658-9f17-18bd343dfb2a rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet >> [ 0.062678] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux-mainline", will be passed to user space. >> [ 0.065485] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) >> [ 0.066928] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) >> [ 0.067006] Fallback order for Node 0: 0 >> [ 0.067011] Built 1 zonelists, mobility grouping on. Total pages: 4189582 >> [ 0.067013] Policy zone: Normal >> [ 0.067423] mem auto-init: stack:all(zero), heap alloc:on, heap free:off, mlocked free:off >> [ 0.067430] software IO TLB: area num 8. >> [ 0.153788] Memory: 16301880K/16758328K available (18432K kernel code, 2176K rwdata, 13400K rodata, 3428K init, 3572K bss, 456188K reserved, 0K cma-reserved) >> [ 0.161940] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 >> [ 0.162138] ftrace: allocating 50086 entries in 196 pages >> [ 0.173494] ftrace: allocated 196 pages with 3 groups >> [ 0.173657] Dynamic Preempt: full >> [ 0.173885] rcu: Preemptible hierarchical RCU implementation. >> [ 0.173887] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8. >> [ 0.173888] rcu: RCU priority boosting: priority 1 delay 500 ms. >> [ 0.173890] Trampoline variant of Tasks RCU enabled. >> [ 0.173890] Rude variant of Tasks RCU enabled. >> [ 0.173891] Tracing variant of Tasks RCU enabled. >> [ 0.173892] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. >> [ 0.173893] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 >> [ 0.173902] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. >> [ 0.173905] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. >> [ 0.173907] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. >> [ 0.179570] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16 >> [ 0.179784] rcu: srcu_init: Setting srcu_struct sizes based on contention. >> [ 0.179879] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) >> [ 0.179956] spurious 8259A interrupt: IRQ7. >> [ 0.179980] Console: colour dummy device 80x25 >> [ 0.179984] printk: legacy console [tty0] enabled >> [ 0.180390] ACPI: Core revision 20240322 >> [ 0.180614] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns >> [ 0.180648] APIC: Switch to symmetric I/O mode setup >> [ 0.181152] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 >> [ 0.197302] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2fe21ff3be8, max_idle_ns: 440795205660 ns >> [ 0.197308] Calibrating delay loop (skipped), value calculated using timer frequency.. 6646.63 BogoMIPS (lpj=11073013) >> [ 0.197338] LVT offset 1 assigned for vector 0xf9 >> [ 0.197343] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 >> [ 0.197345] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 >> [ 0.197350] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization >> [ 0.197352] Spectre V2 : Mitigation: Retpolines >> [ 0.197353] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch >> [ 0.197355] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT >> [ 0.197356] Spectre V2 : Enabling Speculation Barrier for firmware calls >> [ 0.197357] RETBleed: Mitigation: untrained return thunk >> [ 0.197359] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier >> [ 0.197361] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl >> [ 0.197365] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' >> [ 0.197367] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' >> [ 0.197368] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' >> [ 0.197370] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 >> [ 0.197372] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. >> [ 0.222663] Freeing SMP alternatives memory: 40K >> [ 0.222669] pid_max: default: 32768 minimum: 301 >> [ 0.223427] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf >> [ 0.224276] landlock: Up and running. >> [ 0.224279] Yama: becoming mindful. >> [ 0.224286] LSM support for eBPF active >> [ 0.224534] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) >> [ 0.224574] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) >> [ 0.230788] APIC calibration not consistent with PM-Timer: 0ms instead of 100ms >> [ 0.230793] APIC delta adjusted to PM-Timer: 1259529 (1506) >> [ 0.230803] smpboot: CPU0: AMD FX(tm)-8300 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0) >> [ 0.231213] Performance Events: Fam15h core perfctr, AMD PMU driver. >> [ 0.231219] ... version: 0 >> [ 0.231220] ... bit width: 48 >> [ 0.231221] ... generic registers: 6 >> [ 0.231222] ... value mask: 0000ffffffffffff >> [ 0.231224] ... max period: 00007fffffffffff >> [ 0.231225] ... fixed-purpose events: 0 >> [ 0.231226] ... event mask: 000000000000003f >> [ 0.231331] signal: max sigframe size: 1776 >> [ 0.231377] rcu: Hierarchical SRCU implementation. >> [ 0.231378] rcu: Max phase no-delay instances is 1000. >> [ 0.233728] MCE: In-kernel MCE decoding enabled. >> [ 0.233797] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. >> [ 0.233938] smp: Bringing up secondary CPUs ... >> [ 0.233972] smpboot: x86: Booting SMP configuration: >> [ 0.233972] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 >> [ 0.000830] call_irq_handler: 1.55 No irq handler for vector >> [ 0.000830] call_irq_handler: 2.55 No irq handler for vector >> [ 0.000830] call_irq_handler: 3.55 No irq handler for vector >> [ 0.000830] call_irq_handler: 4.55 No irq handler for vector >> [ 0.000830] call_irq_handler: 5.55 No irq handler for vector >> [ 0.000830] call_irq_handler: 6.55 No irq handler for vector >> [ 0.000830] call_irq_handler: 7.55 No irq handler for vector >> [ 0.261635] smp: Brought up 1 node, 8 CPUs >> [ 0.261635] smpboot: Total of 8 processors activated (53171.06 BogoMIPS) >> [ 0.265003] devtmpfs: initialized >> [ 0.265003] x86/mm: Memory block size: 128MB >> [ 0.268551] ACPI: PM: Registering ACPI NVS region [mem 0xbfdf0000-0xbfdf2fff] (12288 bytes) >> [ 0.268551] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns >> [ 0.268551] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) >> [ 0.268551] pinctrl core: initialized pinctrl subsystem >> [ 0.268551] PM: RTC time: 14:55:24, date: 2024-05-28 >> [ 0.268691] NET: Registered PF_NETLINK/PF_ROUTE protocol family >> [ 0.269102] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations >> [ 0.269371] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations >> [ 0.269670] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations >> [ 0.269684] audit: initializing netlink subsys (disabled) >> [ 0.270682] audit: type=2000 audit(1716908123.093:1): state=initialized audit_enabled=0 res=1 >> [ 0.270802] thermal_sys: Registered thermal governor 'fair_share' >> [ 0.270804] thermal_sys: Registered thermal governor 'bang_bang' >> [ 0.270805] thermal_sys: Registered thermal governor 'step_wise' >> [ 0.270807] thermal_sys: Registered thermal governor 'user_space' >> [ 0.270808] thermal_sys: Registered thermal governor 'power_allocator' >> [ 0.270818] cpuidle: using governor ladder >> [ 0.270818] cpuidle: using governor menu >> [ 0.270818] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 >> [ 0.271055] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] >> [ 0.271071] PCI: Using configuration type 1 for base access >> [ 0.271227] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. >> [ 0.274047] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages >> [ 0.274047] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page >> [ 0.274047] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages >> [ 0.274047] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page >> [ 0.274068] Demotion targets for Node 0: null >> [ 0.274192] fbcon: Taking over console >> [ 0.274192] ACPI: Added _OSI(Module Device) >> [ 0.274192] ACPI: Added _OSI(Processor Device) >> [ 0.274192] ACPI: Added _OSI(3.0 _SCP Extensions) >> [ 0.274192] ACPI: Added _OSI(Processor Aggregator Device) >> [ 0.278725] ACPI: 2 ACPI AML tables successfully acquired and loaded >> [ 0.278998] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438) >> [ 0.279005] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438) >> [ 0.279010] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438) >> [ 0.279016] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438) >> [ 0.279028] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438) >> [ 0.279034] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438) >> [ 0.279040] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438) >> [ 0.279046] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438) >> [ 0.279057] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438) >> [ 0.279063] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438) >> [ 0.279069] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438) >> [ 0.279075] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438) >> [ 0.279086] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438) >> [ 0.279092] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438) >> [ 0.279097] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438) >> [ 0.279103] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438) >> [ 0.279114] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438) >> [ 0.279120] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438) >> [ 0.279126] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438) >> [ 0.279131] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438) >> [ 0.279142] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438) >> [ 0.279148] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438) >> [ 0.279153] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438) >> [ 0.279159] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438) >> [ 0.279170] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438) >> [ 0.279176] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438) >> [ 0.279181] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438) >> [ 0.279187] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438) >> [ 0.279198] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438) >> [ 0.279204] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438) >> [ 0.279209] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438) >> [ 0.279215] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438) >> [ 0.279226] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438) >> [ 0.279231] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438) >> [ 0.279237] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438) >> [ 0.279242] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438) >> [ 0.279254] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20240322/dspkginit-438) >> [ 0.279259] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20240322/dspkginit-438) >> [ 0.279265] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20240322/dspkginit-438) >> [ 0.279270] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20240322/dspkginit-438) >> [ 0.284061] ACPI: _OSC evaluation for CPUs failed, trying _PDC >> [ 0.284126] ACPI: Interpreter enabled >> [ 0.284126] ACPI: PM: (supports S0 S3 S4 S5) >> [ 0.284126] ACPI: Using IOAPIC for interrupt routing >> [ 0.284458] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug >> [ 0.284460] PCI: Using E820 reservations for host bridge windows >> [ 0.284609] ACPI: Enabled 5 GPEs in block 00 to 1F >> [ 0.291651] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) >> [ 0.291658] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] >> [ 0.292037] PCI host bridge to bus 0000:00 >> [ 0.292039] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] >> [ 0.292042] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] >> [ 0.292045] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] >> [ 0.292047] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] >> [ 0.292050] pci_bus 0000:00: root bus resource [bus 00-ff] >> [ 0.292068] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000 conventional PCI endpoint >> [ 0.292080] pci 0000:00:00.0: [Firmware Bug]: BAR 3: invalid; can't size >> [ 0.292159] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 PCIe Root Port >> [ 0.292172] pci 0000:00:02.0: PCI bridge to [bus 01] >> [ 0.292176] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] >> [ 0.292179] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff] >> [ 0.292185] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] >> [ 0.292191] pci 0000:00:02.0: enabling Extended Tags >> [ 0.292219] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold >> [ 0.292325] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400 PCIe Root Port >> [ 0.292338] pci 0000:00:04.0: PCI bridge to [bus 02] >> [ 0.292342] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] >> [ 0.292344] pci 0000:00:04.0: bridge window [mem 0xfda00000-0xfdafffff] >> [ 0.292349] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] >> [ 0.292355] pci 0000:00:04.0: enabling Extended Tags >> [ 0.292382] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold >> [ 0.292485] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400 PCIe Root Port >> [ 0.292498] pci 0000:00:06.0: PCI bridge to [bus 03] >> [ 0.292502] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff] >> [ 0.292504] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff] >> [ 0.292509] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] >> [ 0.292515] pci 0000:00:06.0: enabling Extended Tags >> [ 0.292542] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold >> [ 0.292669] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint >> [ 0.292686] pci 0000:00:11.0: BAR 0 [io 0xff00-0xff07] >> [ 0.292696] pci 0000:00:11.0: BAR 1 [io 0xfe00-0xfe03] >> [ 0.292705] pci 0000:00:11.0: BAR 2 [io 0xfd00-0xfd07] >> [ 0.292714] pci 0000:00:11.0: BAR 3 [io 0xfc00-0xfc03] >> [ 0.292723] pci 0000:00:11.0: BAR 4 [io 0xfb00-0xfb0f] >> [ 0.292732] pci 0000:00:11.0: BAR 5 [mem 0xfe02f000-0xfe02f3ff] >> [ 0.292754] pci 0000:00:11.0: set SATA to AHCI mode >> [ 0.292864] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint >> [ 0.292883] pci 0000:00:12.0: BAR 0 [mem 0xfe02e000-0xfe02efff] >> [ 0.293014] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint >> [ 0.293031] pci 0000:00:12.1: BAR 0 [mem 0xfe02d000-0xfe02dfff] >> [ 0.293175] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint >> [ 0.293192] pci 0000:00:12.2: BAR 0 [mem 0xfe02c000-0xfe02c0ff] >> [ 0.293270] pci 0000:00:12.2: supports D1 D2 >> [ 0.293272] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot >> [ 0.293362] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint >> [ 0.293379] pci 0000:00:13.0: BAR 0 [mem 0xfe02b000-0xfe02bfff] >> [ 0.293512] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint >> [ 0.293529] pci 0000:00:13.1: BAR 0 [mem 0xfe02a000-0xfe02afff] >> [ 0.293665] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint >> [ 0.293682] pci 0000:00:13.2: BAR 0 [mem 0xfe029000-0xfe0290ff] >> [ 0.293760] pci 0000:00:13.2: supports D1 D2 >> [ 0.293762] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot >> [ 0.293857] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint >> [ 0.294016] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint >> [ 0.294033] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] >> [ 0.294042] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] >> [ 0.294051] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] >> [ 0.294060] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] >> [ 0.294069] pci 0000:00:14.1: BAR 4 [io 0xfa00-0xfa0f] >> [ 0.294089] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk >> [ 0.294090] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk >> [ 0.294092] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk >> [ 0.294094] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk >> [ 0.294201] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 conventional PCI endpoint >> [ 0.294223] pci 0000:00:14.2: BAR 0 [mem 0xfe024000-0xfe027fff 64bit] >> [ 0.294288] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold >> [ 0.294373] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint >> [ 0.294539] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge >> [ 0.294570] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode) >> [ 0.294576] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] >> [ 0.294579] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] >> [ 0.294585] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] >> [ 0.294675] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint >> [ 0.294692] pci 0000:00:14.5: BAR 0 [mem 0xfe028000-0xfe028fff] >> [ 0.294826] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint >> [ 0.294878] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint >> [ 0.294926] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint >> [ 0.294974] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint >> [ 0.295027] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint >> [ 0.295084] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint >> [ 0.295186] pci 0000:01:00.0: [10de:1c82] type 00 class 0x030000 PCIe Legacy Endpoint >> [ 0.295200] pci 0000:01:00.0: BAR 0 [mem 0xfb000000-0xfbffffff] >> [ 0.295211] pci 0000:01:00.0: BAR 1 [mem 0xc0000000-0xcfffffff 64bit pref] >> [ 0.295222] pci 0000:01:00.0: BAR 3 [mem 0xde000000-0xdfffffff 64bit pref] >> [ 0.295229] pci 0000:01:00.0: BAR 5 [io 0xef00-0xef7f] >> [ 0.295237] pci 0000:01:00.0: ROM [mem 0x00000000-0x0007ffff pref] >> [ 0.295267] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] >> [ 0.295352] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) >> [ 0.295433] pci 0000:01:00.1: [10de:0fb9] type 00 class 0x040300 PCIe Endpoint >> [ 0.295447] pci 0000:01:00.1: BAR 0 [mem 0xfcffc000-0xfcffffff] >> [ 0.295596] pci 0000:00:02.0: PCI bridge to [bus 01] >> [ 0.295643] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330 PCIe Endpoint >> [ 0.295658] pci 0000:02:00.0: BAR 0 [mem 0xfdaff000-0xfdafffff 64bit] >> [ 0.295719] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 0.295791] pci 0000:00:04.0: PCI bridge to [bus 02] >> [ 0.295839] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint >> [ 0.295855] pci 0000:03:00.0: BAR 0 [io 0xce00-0xceff] >> [ 0.295875] pci 0000:03:00.0: BAR 2 [mem 0xfdeff000-0xfdefffff 64bit] >> [ 0.295889] pci 0000:03:00.0: BAR 4 [mem 0xfddfc000-0xfddfffff 64bit pref] >> [ 0.295971] pci 0000:03:00.0: supports D1 D2 >> [ 0.295973] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 0.296102] pci 0000:00:06.0: PCI bridge to [bus 03] >> [ 0.296118] pci_bus 0000:04: extended config space not accessible >> [ 0.296180] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode) >> [ 0.296190] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) >> [ 0.296192] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) >> [ 0.296194] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) >> [ 0.296197] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode) >> [ 0.296492] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 >> [ 0.296494] ACPI: PCI: Interrupt link LNKA disabled >> [ 0.296554] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 >> [ 0.296556] ACPI: PCI: Interrupt link LNKB disabled >> [ 0.296615] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 >> [ 0.296617] ACPI: PCI: Interrupt link LNKC disabled >> [ 0.296675] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 >> [ 0.296677] ACPI: PCI: Interrupt link LNKD disabled >> [ 0.296736] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 >> [ 0.296738] ACPI: PCI: Interrupt link LNKE disabled >> [ 0.296796] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 >> [ 0.296797] ACPI: PCI: Interrupt link LNKF disabled >> [ 0.296855] ACPI: PCI: Interrupt link LNK0 configured for IRQ 0 >> [ 0.296857] ACPI: PCI: Interrupt link LNK0 disabled >> [ 0.296915] ACPI: PCI: Interrupt link LNK1 configured for IRQ 0 >> [ 0.296916] ACPI: PCI: Interrupt link LNK1 disabled >> [ 0.297713] iommu: Default domain type: Translated >> [ 0.297713] iommu: DMA domain TLB invalidation policy: lazy mode >> [ 0.297713] SCSI subsystem initialized >> [ 0.297713] libata version 3.00 loaded. >> [ 0.297713] ACPI: bus type USB registered >> [ 0.297713] usbcore: registered new interface driver usbfs >> [ 0.297713] usbcore: registered new interface driver hub >> [ 0.297713] usbcore: registered new device driver usb >> [ 0.297713] EDAC MC: Ver: 3.0.0 >> [ 0.297713] NetLabel: Initializing >> [ 0.297713] NetLabel: domain hash size = 128 >> [ 0.297713] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO >> [ 0.297713] NetLabel: unlabeled traffic allowed by default >> [ 0.297713] mctp: management component transport protocol core >> [ 0.297713] NET: Registered PF_MCTP protocol family >> [ 0.297713] PCI: Using ACPI for IRQ routing >> [ 0.306985] PCI: pci_cache_line_size set to 64 bytes >> [ 0.307038] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] >> [ 0.307040] e820: reserve RAM buffer [mem 0xbfdf0000-0xbfffffff] >> [ 0.307042] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff] >> [ 0.307357] pci 0000:01:00.0: vgaarb: setting as boot VGA device >> [ 0.307357] pci 0000:01:00.0: vgaarb: bridge control possible >> [ 0.307357] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none >> [ 0.307357] vgaarb: loaded >> [ 0.307357] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 >> [ 0.307358] hpet0: 4 comparators, 32-bit 14.318180 MHz counter >> [ 0.310643] clocksource: Switched to clocksource tsc-early >> [ 0.310661] VFS: Disk quotas dquot_6.6.0 >> [ 0.310661] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) >> [ 0.310661] pnp: PnP ACPI init >> [ 0.310661] system 00:00: [io 0x04d0-0x04d1] has been reserved >> [ 0.310661] system 00:00: [io 0x0220-0x0225] has been reserved >> [ 0.310661] system 00:00: [io 0x0290-0x0294] has been reserved >> [ 0.311960] system 00:01: [io 0x4100-0x411f] has been reserved >> [ 0.311967] system 00:01: [io 0x0228-0x022f] has been reserved >> [ 0.311970] system 00:01: [io 0x040b] has been reserved >> [ 0.311972] system 00:01: [io 0x04d6] has been reserved >> [ 0.311974] system 00:01: [io 0x0c00-0x0c01] has been reserved >> [ 0.311976] system 00:01: [io 0x0c14] has been reserved >> [ 0.311978] system 00:01: [io 0x0c50-0x0c52] has been reserved >> [ 0.311980] system 00:01: [io 0x0c6c-0x0c6d] has been reserved >> [ 0.311982] system 00:01: [io 0x0c6f] has been reserved >> [ 0.311984] system 00:01: [io 0x0cd0-0x0cd1] has been reserved >> [ 0.311986] system 00:01: [io 0x0cd2-0x0cd3] has been reserved >> [ 0.311987] system 00:01: [io 0x0cd4-0x0cdf] has been reserved >> [ 0.311989] system 00:01: [io 0x4000-0x40fe] has been reserved >> [ 0.311995] system 00:01: [io 0x4210-0x4217] has been reserved >> [ 0.311997] system 00:01: [io 0x0b00-0x0b0f] has been reserved >> [ 0.311999] system 00:01: [io 0x0b10-0x0b1f] has been reserved >> [ 0.312001] system 00:01: [io 0x0b20-0x0b3f] has been reserved >> [ 0.312003] system 00:01: [mem 0x00000000-0x00000fff window] could not be reserved >> [ 0.312006] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved >> [ 0.313070] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved >> [ 0.313313] pnp 00:06: disabling [mem 0x000ce600-0x000cffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff] >> [ 0.313336] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved >> [ 0.313339] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved >> [ 0.313341] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved >> [ 0.313343] system 00:06: [mem 0xbfdf0000-0xbfdfffff] could not be reserved >> [ 0.313346] system 00:06: [mem 0xffff0000-0xffffffff] has been reserved >> [ 0.313348] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved >> [ 0.313350] system 00:06: [mem 0x00100000-0xbfdeffff] could not be reserved >> [ 0.313352] system 00:06: [mem 0xbfe00000-0xbfefffff] has been reserved >> [ 0.313354] system 00:06: [mem 0xbff00000-0xbfffffff] could not be reserved >> [ 0.313357] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved >> [ 0.313359] system 00:06: [mem 0xfee00000-0xfee00fff] could not be reserved >> [ 0.313361] system 00:06: [mem 0xfff80000-0xfffeffff] has been reserved >> [ 0.313386] pnp: PnP ACPI: found 7 devices >> [ 0.320151] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns >> [ 0.320423] NET: Registered PF_INET protocol family >> [ 0.320747] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) >> [ 0.337449] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) >> [ 0.337493] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) >> [ 0.337664] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) >> [ 0.338080] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) >> [ 0.338397] TCP: Hash tables configured (established 131072 bind 65536) >> [ 0.338622] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) >> [ 0.338775] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) >> [ 0.338839] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) >> [ 0.338937] NET: Registered PF_UNIX/PF_LOCAL protocol family >> [ 0.338952] NET: Registered PF_XDP protocol family >> [ 0.338967] pci 0000:00:02.0: PCI bridge to [bus 01] >> [ 0.338971] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] >> [ 0.338975] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff] >> [ 0.338978] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] >> [ 0.338982] pci 0000:00:04.0: PCI bridge to [bus 02] >> [ 0.338984] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] >> [ 0.338987] pci 0000:00:04.0: bridge window [mem 0xfda00000-0xfdafffff] >> [ 0.338990] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] >> [ 0.338994] pci 0000:00:06.0: PCI bridge to [bus 03] >> [ 0.338996] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff] >> [ 0.338999] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff] >> [ 0.339001] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] >> [ 0.339006] pci 0000:00:14.4: PCI bridge to [bus 04] >> [ 0.339008] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] >> [ 0.339013] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] >> [ 0.339017] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] >> [ 0.339024] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] >> [ 0.339027] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] >> [ 0.339029] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window] >> [ 0.339031] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window] >> [ 0.339033] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] >> [ 0.339034] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff] >> [ 0.339036] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref] >> [ 0.339038] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] >> [ 0.339040] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff] >> [ 0.339042] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] >> [ 0.339044] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] >> [ 0.339045] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff] >> [ 0.339047] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref] >> [ 0.339049] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] >> [ 0.339051] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff] >> [ 0.339053] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref] >> [ 0.339055] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] >> [ 0.339056] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] >> [ 0.339058] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000dffff window] >> [ 0.339060] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfebfffff window] >> [ 0.358813] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x730 took 19226 usecs >> [ 0.375500] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x730 took 16282 usecs >> [ 0.392195] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x730 took 16103 usecs >> [ 0.408890] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x730 took 16292 usecs >> [ 0.425585] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x730 took 16090 usecs >> [ 0.425616] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec >> [ 0.425651] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 >> [ 0.425850] PCI: CLS 64 bytes, default 64 >> [ 0.425871] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) >> [ 0.425872] software IO TLB: mapped [mem 0x00000000bbdf0000-0x00000000bfdf0000] (64MB) >> [ 0.425913] LVT offset 0 assigned for vector 0x400 >> [ 0.425959] Trying to unpack rootfs image as initramfs... >> [ 0.431037] perf: AMD IBS detected (0x000000ff) >> [ 0.432658] Initialise system trusted keyrings >> [ 0.432672] Key type blacklist registered >> [ 0.432730] workingset: timestamp_bits=41 max_order=22 bucket_order=0 >> [ 0.432739] zbud: loaded >> [ 0.433154] fuse: init (API version 7.40) >> [ 0.433398] integrity: Platform Keyring initialized >> [ 0.433404] integrity: Machine keyring initialized >> [ 0.448217] Key type asymmetric registered >> [ 0.448219] Asymmetric key parser 'x509' registered >> [ 0.448295] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) >> [ 0.448363] io scheduler mq-deadline registered >> [ 0.448365] io scheduler kyber registered >> [ 0.448421] io scheduler bfq registered >> [ 0.449310] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 >> [ 0.449428] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 >> [ 0.449459] ACPI: button: Power Button [PWRB] >> [ 0.449508] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 >> [ 0.451942] ACPI: button: Power Button [PWRF] >> [ 0.452005] ACPI: \_PR_.C000: Found 2 idle states >> [ 0.452097] ACPI: \_PR_.C001: Found 2 idle states >> [ 0.452173] ACPI: \_PR_.C002: Found 2 idle states >> [ 0.452251] ACPI: \_PR_.C003: Found 2 idle states >> [ 0.452328] ACPI: \_PR_.C004: Found 2 idle states >> [ 0.452412] ACPI: \_PR_.C005: Found 2 idle states >> [ 0.452481] ACPI: \_PR_.C006: Found 2 idle states >> [ 0.452548] ACPI: \_PR_.C007: Found 2 idle states >> [ 0.452838] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled >> [ 0.453015] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A >> [ 0.456260] Non-volatile memory driver v1.3 >> [ 0.456262] Linux agpgart interface v0.103 >> [ 0.456370] ACPI: bus type drm_connector registered >> [ 0.457223] ahci 0000:00:11.0: version 3.0 >> [ 0.457443] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode >> [ 0.457447] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) >> [ 0.457450] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc >> [ 0.458045] scsi host0: ahci >> [ 0.458260] scsi host1: ahci >> [ 0.458401] scsi host2: ahci >> [ 0.458525] scsi host3: ahci >> [ 0.458578] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 lpm-pol 3 >> [ 0.458582] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 lpm-pol 3 >> [ 0.458584] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 lpm-pol 3 >> [ 0.458587] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 lpm-pol 3 >> [ 0.458798] ohci-pci 0000:00:12.0: OHCI PCI host controller >> [ 0.458805] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 >> [ 0.458845] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000 >> [ 0.517654] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 >> [ 0.517662] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> [ 0.517665] usb usb1: Product: OHCI PCI host controller >> [ 0.517667] usb usb1: Manufacturer: Linux 6.10.0-rc1-1.1-mainline ohci_hcd >> [ 0.517669] usb usb1: SerialNumber: 0000:00:12.0 >> [ 0.517928] hub 1-0:1.0: USB hub found >> [ 0.517940] hub 1-0:1.0: 3 ports detected >> [ 0.518219] ehci-pci 0000:00:12.2: EHCI Host Controller >> [ 0.518226] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 >> [ 0.518231] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround >> [ 0.518242] ehci-pci 0000:00:12.2: debug port 1 >> [ 0.518296] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000 >> [ 0.524334] Freeing initrd memory: 50776K >> [ 0.530326] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 >> [ 0.530446] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 >> [ 0.530450] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> [ 0.530452] usb usb2: Product: EHCI Host Controller >> [ 0.530454] usb usb2: Manufacturer: Linux 6.10.0-rc1-1.1-mainline ehci_hcd >> [ 0.530456] usb usb2: SerialNumber: 0000:00:12.2 >> [ 0.530609] hub 2-0:1.0: USB hub found >> [ 0.530617] hub 2-0:1.0: 6 ports detected >> [ 0.597196] hub 1-0:1.0: USB hub found >> [ 0.597209] hub 1-0:1.0: 3 ports detected >> [ 0.597341] ehci-pci 0000:00:13.2: EHCI Host Controller >> [ 0.597348] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 >> [ 0.597353] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround >> [ 0.597364] ehci-pci 0000:00:13.2: debug port 1 >> [ 0.597414] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000 >> [ 0.610458] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 >> [ 0.610575] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 >> [ 0.610578] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> [ 0.610581] usb usb3: Product: EHCI Host Controller >> [ 0.610583] usb usb3: Manufacturer: Linux 6.10.0-rc1-1.1-mainline ehci_hcd >> [ 0.610584] usb usb3: SerialNumber: 0000:00:13.2 >> [ 0.610700] hub 3-0:1.0: USB hub found >> [ 0.610708] hub 3-0:1.0: 6 ports detected >> [ 0.610891] ohci-pci 0000:00:12.1: OHCI PCI host controller >> [ 0.610897] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 >> [ 0.610926] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000 >> [ 0.671296] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 >> [ 0.671300] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> [ 0.671302] usb usb4: Product: OHCI PCI host controller >> [ 0.671304] usb usb4: Manufacturer: Linux 6.10.0-rc1-1.1-mainline ohci_hcd >> [ 0.671305] usb usb4: SerialNumber: 0000:00:12.1 >> [ 0.671543] hub 4-0:1.0: USB hub found >> [ 0.671554] hub 4-0:1.0: 3 ports detected >> [ 0.671854] ohci-pci 0000:00:13.0: OHCI PCI host controller >> [ 0.671859] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 >> [ 0.671895] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000 >> [ 0.731397] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 >> [ 0.731401] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> [ 0.731403] usb usb5: Product: OHCI PCI host controller >> [ 0.731404] usb usb5: Manufacturer: Linux 6.10.0-rc1-1.1-mainline ohci_hcd >> [ 0.731406] usb usb5: SerialNumber: 0000:00:13.0 >> [ 0.731651] hub 5-0:1.0: USB hub found >> [ 0.731670] hub 5-0:1.0: 3 ports detected >> [ 0.731930] ohci-pci 0000:00:13.1: OHCI PCI host controller >> [ 0.731936] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 >> [ 0.731955] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000 >> [ 0.772520] ata4: SATA link down (SStatus 0 SControl 300) >> [ 0.773799] ata1: SATA link down (SStatus 0 SControl 300) >> [ 0.783810] usb 2-1: new high-speed USB device number 2 using ehci-pci >> [ 0.791492] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 >> [ 0.791497] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> [ 0.791499] usb usb6: Product: OHCI PCI host controller >> [ 0.791501] usb usb6: Manufacturer: Linux 6.10.0-rc1-1.1-mainline ohci_hcd >> [ 0.791503] usb usb6: SerialNumber: 0000:00:13.1 >> [ 0.791683] hub 6-0:1.0: USB hub found >> [ 0.791697] hub 6-0:1.0: 3 ports detected >> [ 0.791966] ohci-pci 0000:00:14.5: OHCI PCI host controller >> [ 0.791972] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 >> [ 0.791991] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000 >> [ 0.851602] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 >> [ 0.851606] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> [ 0.851608] usb usb7: Product: OHCI PCI host controller >> [ 0.851610] usb usb7: Manufacturer: Linux 6.10.0-rc1-1.1-mainline ohci_hcd >> [ 0.851611] usb usb7: SerialNumber: 0000:00:14.5 >> [ 0.851843] hub 7-0:1.0: USB hub found >> [ 0.851854] hub 7-0:1.0: 2 ports detected >> [ 0.852034] usbcore: registered new interface driver usbserial_generic >> [ 0.852041] usbserial: USB Serial support registered for generic >> [ 0.852130] rtc_cmos 00:02: RTC can wake from S4 >> [ 0.852362] rtc_cmos 00:02: registered as rtc0 >> [ 0.852387] rtc_cmos 00:02: setting system clock to 2024-05-28T14:55:25 UTC (1716908125) >> [ 0.852420] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs >> [ 0.852467] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled >> [ 0.852678] ledtrig-cpu: registered to indicate activity on CPUs >> [ 0.853181] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0 >> [ 0.858086] Console: switching to colour frame buffer device 160x64 >> [ 0.861204] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device >> [ 0.861268] hid: raw HID events driver (C) Jiri Kosina >> [ 0.861357] drop_monitor: Initializing network drop monitor service >> [ 0.861679] NET: Registered PF_INET6 protocol family >> [ 0.869644] Segment Routing with IPv6 >> [ 0.869647] RPL Segment Routing with IPv6 >> [ 0.869665] In-situ OAM (IOAM) with IPv6 >> [ 0.869704] NET: Registered PF_PACKET protocol family >> [ 0.869756] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. >> [ 0.870256] microcode: Current revision: 0x06000852 >> [ 0.870258] microcode: Updated early from: 0x06000822 >> [ 0.870396] IPI shorthand broadcast: enabled >> [ 0.873069] sched_clock: Marking stable (874176692, -2503248)->(1778689574, -907016130) >> [ 0.873227] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level >> [ 0.873326] registered taskstats version 1 >> [ 0.873659] Loading compiled-in X.509 certificates >> [ 0.878261] Loaded X.509 cert 'Build time autogenerated kernel key: 06d3346cea79f18ad765f94d96c9d8cc480c5b54' >> [ 0.880699] Demotion targets for Node 0: null >> [ 0.880949] Key type .fscrypt registered >> [ 0.880951] Key type fscrypt-provisioning registered >> [ 0.881482] PM: Magic number: 8:474:941 >> [ 0.885072] RAS: Correctable Errors collector initialized. >> [ 0.899067] clk: Disabling unused clocks >> [ 0.899071] PM: genpd: Disabling unused power domains >> [ 0.935183] usb 2-1: New USB device found, idVendor=0bda, idProduct=b812, bcdDevice= 2.10 >> [ 0.935188] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 >> [ 0.935191] usb 2-1: Product: USB3.0 802.11ac 1200M Adapter >> [ 0.935193] usb 2-1: Manufacturer: Realtek >> [ 0.935194] usb 2-1: SerialNumber: 123456 >> [ 0.938653] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> [ 0.938815] ata2.00: ATA-11: Apacer AS340 120GB, AP612PE0, max UDMA/133 >> [ 0.938845] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA >> [ 0.939449] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> [ 0.939469] ata2.00: configured for UDMA/133 >> [ 0.940170] ata3.00: ATA-8: TOSHIBA HDWD110, MS2OA8J0, max UDMA/133 >> [ 0.940398] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA >> [ 0.941260] ata3.00: configured for UDMA/133 >> [ 0.952301] scsi 1:0:0:0: Direct-Access ATA Apacer AS340 120 2PE0 PQ: 0 ANSI: 5 >> [ 0.952706] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) >> [ 0.952718] sd 1:0:0:0: [sda] Write Protect is off >> [ 0.952720] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 >> [ 0.952738] scsi 2:0:0:0: Direct-Access ATA TOSHIBA HDWD110 A8J0 PQ: 0 ANSI: 5 >> [ 0.952745] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >> [ 0.952783] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes >> [ 0.953078] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) >> [ 0.953081] sd 2:0:0:0: [sdb] 4096-byte physical blocks >> [ 0.953094] sd 2:0:0:0: [sdb] Write Protect is off >> [ 0.953097] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 >> [ 0.953119] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >> [ 0.953155] sd 2:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes >> [ 0.953410] sda: sda1 sda2 >> [ 0.953543] sd 1:0:0:0: [sda] Attached SCSI disk >> [ 0.974223] sdb: sdb1 sdb2 >> [ 0.974515] sd 2:0:0:0: [sdb] Attached SCSI disk >> [ 0.976712] Freeing unused decrypted memory: 2028K >> [ 0.977421] Freeing unused kernel image (initmem) memory: 3428K >> [ 0.977449] Write protecting the kernel read-only data: 32768k >> [ 0.977898] Freeing unused kernel image (rodata/data gap) memory: 936K >> [ 1.021479] x86/mm: Checked W+X mappings: passed, no W+X pages found. >> [ 1.021484] rodata_test: all tests were successful >> [ 1.021489] Run /init as init process >> [ 1.021490] with arguments: >> [ 1.021492] /init >> [ 1.021493] with environment: >> [ 1.021494] HOME=/ >> [ 1.021495] TERM=linux >> [ 1.021496] BOOT_IMAGE=/vmlinuz-linux-mainline >> [ 1.195986] scsi host4: pata_atiixp >> [ 1.196167] scsi host5: pata_atiixp >> [ 1.196211] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 lpm-pol 0 >> [ 1.196214] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 lpm-pol 0 >> [ 1.196565] xhci_hcd 0000:02:00.0: xHCI Host Controller >> [ 1.196572] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 >> [ 1.196654] xhci_hcd 0000:02:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000890 >> [ 1.196822] xhci_hcd 0000:02:00.0: xHCI Host Controller >> [ 1.196827] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 >> [ 1.196830] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed >> [ 1.196885] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 >> [ 1.196888] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> [ 1.196891] usb usb8: Product: xHCI Host Controller >> [ 1.196893] usb usb8: Manufacturer: Linux 6.10.0-rc1-1.1-mainline xhci-hcd >> [ 1.196895] usb usb8: SerialNumber: 0000:02:00.0 >> [ 1.197034] hub 8-0:1.0: USB hub found >> [ 1.197044] hub 8-0:1.0: 1 port detected >> [ 1.197210] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10 >> [ 1.197213] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> [ 1.197215] usb usb9: Product: xHCI Host Controller >> [ 1.197217] usb usb9: Manufacturer: Linux 6.10.0-rc1-1.1-mainline xhci-hcd >> [ 1.197218] usb usb9: SerialNumber: 0000:02:00.0 >> [ 1.197369] hub 9-0:1.0: USB hub found >> [ 1.197379] hub 9-0:1.0: 4 ports detected >> [ 1.267596] usb 1-3: new low-speed USB device number 2 using ohci-pci >> [ 1.440864] usb 8-1: new high-speed USB device number 2 using xhci_hcd >> [ 1.450887] usb 1-3: New USB device found, idVendor=0c45, idProduct=7603, bcdDevice= 1.06 >> [ 1.450899] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 >> [ 1.450905] usb 1-3: Product: USB Keyboard >> [ 1.454180] tsc: Refined TSC clocksource calibration: 3322.064 MHz >> [ 1.454188] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fe2b718c89, max_idle_ns: 440795253369 ns >> [ 1.454219] clocksource: Switched to clocksource tsc >> [ 1.474236] usbcore: registered new interface driver usbhid >> [ 1.474239] usbhid: USB HID core driver >> [ 1.480046] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.0/0003:0C45:7603.0001/input/input2 >> [ 1.534698] hid-generic 0003:0C45:7603.0001: input,hidraw0: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:12.0-3/input0 >> [ 1.535151] input: USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:0C45:7603.0002/input/input3 >> [ 1.585891] usb 8-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20 >> [ 1.585895] usb 8-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 >> [ 1.585897] usb 8-1: Product: USB2.0 Hub >> [ 1.586600] hub 8-1:1.0: USB hub found >> [ 1.586788] hub 8-1:1.0: 4 ports detected >> [ 1.590941] input: USB Keyboard System Control as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:0C45:7603.0002/input/input4 >> [ 1.591019] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:0C45:7603.0002/input/input6 >> [ 1.591157] hid-generic 0003:0C45:7603.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:12.0-3/input1 >> [ 2.087607] usb 4-1: new full-speed USB device number 2 using ohci-pci >> [ 2.124296] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> [ 2.125160] ata2.00: configured for UDMA/133 >> [ 2.282382] usb 4-1: New USB device found, idVendor=04d9, idProduct=a088, bcdDevice= 1.00 >> [ 2.282394] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 >> [ 2.282400] usb 4-1: Product: USB Gaming Mouse >> [ 2.282405] usb 4-1: Manufacturer: RH >> [ 2.289786] input: RH USB Gaming Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:04D9:A088.0003/input/input7 >> [ 2.344706] hid-generic 0003:04D9:A088.0003: input,hidraw2: USB HID v1.10 Keyboard [RH USB Gaming Mouse] on usb-0000:00:12.1-1/input0 >> [ 2.352036] input: RH USB Gaming Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:A088.0004/input/input8 >> [ 2.352104] input: RH USB Gaming Mouse System Control as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:A088.0004/input/input9 >> [ 2.407872] input: RH USB Gaming Mouse Consumer Control as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:A088.0004/input/input10 >> [ 2.407983] hid-generic 0003:04D9:A088.0004: input,hiddev97,hidraw3: USB HID v1.10 Mouse [RH USB Gaming Mouse] on usb-0000:00:12.1-1/input1 >> [ 2.411756] hid-generic 0003:04D9:A088.0005: hiddev98,hidraw4: USB HID v1.10 Device [RH USB Gaming Mouse] on usb-0000:00:12.1-1/input2 >> [ 2.950945] ata2.00: exception Emask 0x10 SAct 0x2 SErr 0x40d0002 action 0xe frozen >> [ 2.950958] ata2.00: irq_stat 0x00000040, connection status changed >> [ 2.950962] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 2.950970] ata2.00: failed command: READ FPDMA QUEUED >> [ 2.950974] ata2.00: cmd 60/08:08:80:ff:f1/00:00:0d:00:00/40 tag 1 ncq dma 4096 in >> res 40/00:a0:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error) >> [ 2.950989] ata2.00: status: { DRDY } >> [ 2.951000] ata2: hard resetting link >> [ 3.847612] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> [ 3.848393] ata2.00: configured for UDMA/133 >> [ 3.858578] sd 1:0:0:0: [sda] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s >> [ 3.858590] sd 1:0:0:0: [sda] tag#1 Sense Key : Illegal Request [current] >> [ 3.858596] sd 1:0:0:0: [sda] tag#1 Add. Sense: Unaligned write command >> [ 3.858602] sd 1:0:0:0: [sda] tag#1 CDB: Read(10) 28 00 0d f1 ff 80 00 00 08 00 >> [ 3.858606] I/O error, dev sda, sector 233963392 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 >> [ 3.858640] ata2: EH complete >> [ 4.024750] EXT4-fs (sda2): mounted filesystem 963daeed-0888-4658-9f17-18bd343dfb2a r/w with ordered data mode. Quota mode: none. >> [ 4.189513] systemd[1]: systemd 255.7-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified) >> [ 4.189520] systemd[1]: Detected architecture x86-64. >> [ 4.377855] systemd[1]: bpf-lsm: LSM BPF program attached >> [ 4.445714] systemd-fstab-generator[268]: Mount point is not a valid path, ignoring. >> [ 4.446994] systemd-fstab-generator[268]: Mount point is not a valid path, ignoring. >> [ 5.074228] random: crng init done >> [ 5.137593] ata2.00: exception Emask 0x10 SAct 0x6000 SErr 0x40d0002 action 0xe frozen >> [ 5.137605] ata2.00: irq_stat 0x00000040, connection status changed >> [ 5.137610] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 5.137619] ata2.00: failed command: READ FPDMA QUEUED >> [ 5.137623] ata2.00: cmd 60/40:68:28:3d:9c/00:00:01:00:00/40 tag 13 ncq dma 32768 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 5.137638] ata2.00: status: { DRDY } >> [ 5.137643] ata2.00: failed command: READ FPDMA QUEUED >> [ 5.137646] ata2.00: cmd 60/08:70:30:04:ad/00:00:01:00:00/40 tag 14 ncq dma 4096 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 5.137660] ata2.00: status: { DRDY } >> [ 5.137669] ata2: hard resetting link >> [ 6.034334] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> [ 6.035116] ata2.00: configured for UDMA/133 >> [ 6.045220] sd 1:0:0:0: [sda] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s >> [ 6.045224] sd 1:0:0:0: [sda] tag#13 Sense Key : Illegal Request [current] >> [ 6.045227] sd 1:0:0:0: [sda] tag#13 Add. Sense: Unaligned write command >> [ 6.045229] sd 1:0:0:0: [sda] tag#13 CDB: Read(10) 28 00 01 9c 3d 28 00 00 40 00 >> [ 6.045231] I/O error, dev sda, sector 27016488 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0 >> [ 6.045240] sd 1:0:0:0: [sda] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s >> [ 6.045242] sd 1:0:0:0: [sda] tag#14 Sense Key : Illegal Request [current] >> [ 6.045243] sd 1:0:0:0: [sda] tag#14 Add. Sense: Unaligned write command >> [ 6.045245] sd 1:0:0:0: [sda] tag#14 CDB: Read(10) 28 00 01 ad 04 30 00 00 08 00 >> [ 6.045246] I/O error, dev sda, sector 28116016 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 >> [ 6.045260] ata2: EH complete >> [ 6.061330] zram: Added device: zram0 >> [ 6.213738] systemd[1]: Queued start job for default target Graphical Interface. >> [ 6.268916] systemd[1]: Created slice Slice /system/dirmngr. >> [ 6.269281] systemd[1]: Created slice Slice /system/getty. >> [ 6.269601] systemd[1]: Created slice Slice /system/gpg-agent. >> [ 6.269932] systemd[1]: Created slice Slice /system/gpg-agent-browser. >> [ 6.270255] systemd[1]: Created slice Slice /system/gpg-agent-extra. >> [ 6.270601] systemd[1]: Created slice Slice /system/gpg-agent-ssh. >> [ 6.270969] systemd[1]: Created slice Slice /system/keyboxd. >> [ 6.271364] systemd[1]: Created slice Slice /system/modprobe. >> [ 6.271741] systemd[1]: Created slice Slice /system/systemd-fsck. >> [ 6.272139] systemd[1]: Created slice Slice /system/systemd-zram-setup. >> [ 6.272407] systemd[1]: Created slice User and Session Slice. >> [ 6.272473] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. >> [ 6.272519] systemd[1]: Started Forward Password Requests to Wall Directory Watch. >> [ 6.272671] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. >> [ 6.272689] systemd[1]: Expecting device /dev/disk/by-uuid/03ce297b-4be8-4886-953d-2d2cc4bd0862... >> [ 6.272696] systemd[1]: Expecting device /dev/disk/by-uuid/6BB1-1CFA... >> [ 6.272702] systemd[1]: Expecting device /dev/zram0... >> [ 6.272712] systemd[1]: Reached target Local Encrypted Volumes. >> [ 6.272732] systemd[1]: Reached target Local Integrity Protected Volumes. >> [ 6.272760] systemd[1]: Reached target Path Units. >> [ 6.272774] systemd[1]: Reached target Remote File Systems. >> [ 6.272786] systemd[1]: Reached target Slice Units. >> [ 6.272813] systemd[1]: Reached target Local Verity Protected Volumes. >> [ 6.272878] systemd[1]: Listening on Device-mapper event daemon FIFOs. >> [ 6.274451] systemd[1]: Listening on LVM2 poll daemon socket. >> [ 6.276124] systemd[1]: Listening on Process Core Dump Socket. >> [ 6.276243] systemd[1]: Listening on Journal Socket (/dev/log). >> [ 6.276352] systemd[1]: Listening on Journal Socket. >> [ 6.276491] systemd[1]: Listening on Network Service Netlink Socket. >> [ 6.276508] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). >> [ 6.276753] systemd[1]: Listening on udev Control Socket. >> [ 6.276841] systemd[1]: Listening on udev Kernel Socket. >> [ 6.278013] systemd[1]: Mounting Huge Pages File System... >> [ 6.278798] systemd[1]: Mounting POSIX Message Queue File System... >> [ 6.279574] systemd[1]: Mounting Kernel Debug File System... >> [ 6.280259] systemd[1]: Mounting Kernel Trace File System... >> [ 6.281428] systemd[1]: Starting Create List of Static Device Nodes... >> [ 6.282416] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... >> [ 6.283594] systemd[1]: Starting Load Kernel Module configfs... >> [ 6.285440] systemd[1]: Starting Load Kernel Module dm_mod... >> [ 6.288313] systemd[1]: Starting Load Kernel Module drm... >> [ 6.289657] systemd[1]: Starting Load Kernel Module fuse... >> [ 6.290654] systemd[1]: Starting Load Kernel Module loop... >> [ 6.290721] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). >> [ 6.293064] systemd[1]: Starting Journal Service... >> [ 6.296123] systemd[1]: Starting Load Kernel Modules... >> [ 6.297125] systemd[1]: Starting Generate network units from Kernel command line... >> [ 6.297157] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). >> [ 6.298301] systemd[1]: Starting Remount Root and Kernel File Systems... >> [ 6.298401] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). >> [ 6.300167] systemd[1]: Starting Coldplug All udev Devices... >> [ 6.302399] systemd[1]: Mounted Huge Pages File System. >> [ 6.302541] systemd[1]: Mounted POSIX Message Queue File System. >> [ 6.302700] systemd[1]: Mounted Kernel Debug File System. >> [ 6.302823] systemd[1]: Mounted Kernel Trace File System. >> [ 6.303130] systemd[1]: Finished Create List of Static Device Nodes. >> [ 6.303558] systemd[1]: modprobe@configfs.service: Deactivated successfully. >> [ 6.303804] systemd[1]: Finished Load Kernel Module configfs. >> [ 6.304234] systemd[1]: modprobe@drm.service: Deactivated successfully. >> [ 6.305011] systemd[1]: Finished Load Kernel Module drm. >> [ 6.305409] systemd[1]: modprobe@fuse.service: Deactivated successfully. >> [ 6.305623] systemd[1]: Finished Load Kernel Module fuse. >> [ 6.306920] systemd[1]: Mounting FUSE Control File System... >> [ 6.310967] systemd[1]: Mounting Kernel Configuration File System... >> [ 6.314384] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... >> [ 6.314746] systemd[1]: Finished Generate network units from Kernel command line. >> [ 6.315728] loop: module loaded >> [ 6.315812] device-mapper: uevent: version 1.0.3 >> [ 6.315927] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@xxxxxxxxxxxxxxx >> [ 6.316131] systemd[1]: Mounted FUSE Control File System. >> [ 6.316526] systemd[1]: modprobe@loop.service: Deactivated successfully. >> [ 6.316727] systemd[1]: Finished Load Kernel Module loop. >> [ 6.317211] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. >> [ 6.317462] systemd[1]: Finished Load Kernel Module dm_mod. >> [ 6.318137] systemd[1]: Mounted Kernel Configuration File System. >> [ 6.321272] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met. >> [ 6.327810] systemd-journald[293]: Collecting audit messages is disabled. >> [ 6.330711] sd 1:0:0:0: Attached scsi generic sg0 type 0 >> [ 6.330756] sd 2:0:0:0: Attached scsi generic sg1 type 0 >> [ 6.337713] EXT4-fs (sda2): re-mounted 963daeed-0888-4658-9f17-18bd343dfb2a r/w. Quota mode: none. >> [ 6.338469] Asymmetric key parser 'pkcs8' registered >> [ 6.338877] systemd[1]: Finished Remount Root and Kernel File Systems. >> [ 6.339806] systemd[1]: Rebuild Hardware Database was skipped because no trigger condition checks were met. >> [ 6.340815] systemd[1]: Starting Load/Save OS Random Seed... >> [ 6.340851] systemd[1]: TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). >> [ 6.341146] systemd[1]: Finished Load Kernel Modules. >> [ 6.342097] systemd[1]: Starting Apply Kernel Variables... >> [ 6.359689] systemd[1]: Finished Apply Kernel Variables. >> [ 6.360781] systemd[1]: Finished Load/Save OS Random Seed. >> [ 6.365885] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. >> [ 6.366977] systemd[1]: Starting Create System Users... >> [ 6.373038] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. >> [ 6.394752] systemd[1]: Finished Create System Users. >> [ 6.395804] systemd[1]: Starting Create Static Device Nodes in /dev... >> [ 6.403417] systemd[1]: Started Journal Service. >> [ 6.426247] systemd-journald[293]: Received client request to flush runtime journal. >> [ 6.436701] systemd-journald[293]: /var/log/journal/ca3d73a04dc345538c9904a96756e41e/system.journal: Journal file uses a different sequence number ID, rotating. >> [ 6.436708] systemd-journald[293]: Rotating system journal. >> [ 6.561450] zram0: detected capacity change from 0 to 8388608 >> [ 6.617585] mousedev: PS/2 mouse device common for all mice >> [ 6.624669] parport_pc 00:04: reported by Plug and Play ACPI >> [ 6.624743] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] >> [ 6.642312] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20240322/utaddress-204) >> [ 6.642324] ACPI: OSL: Resource conflict; ACPI support missing from driver? >> [ 6.642621] acpi_cpufreq: overriding BIOS provided _PSD data >> [ 6.646974] input: PC Speaker as /devices/platform/pcspkr/input/input12 >> [ 6.647702] cryptd: max_cpu_qlen set to 1000 >> [ 6.662746] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver >> [ 6.663343] sp5100-tco sp5100-tco: Failed to reserve MMIO or alternate MMIO region >> [ 6.663347] sp5100-tco sp5100-tco: probe with driver sp5100-tco failed with error -16 >> [ 6.680483] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control >> [ 6.687332] AVX version of gcm_enc/dec engaged. >> [ 6.687380] AES CTR mode by8 optimization enabled >> [ 6.702811] r8169 0000:03:00.0 eth0: RTL8168g/8111g, e0:d5:5e:3b:15:1f, XID 4c0, IRQ 28 >> [ 6.702821] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] >> [ 6.708344] r8169 0000:03:00.0 enp3s0: renamed from eth0 >> [ 6.729580] ppdev: user-space parallel port driver >> [ 6.758079] Adding 4194300k swap on /dev/zram0. Priority:100 extents:1 across:4194300k SSDsc >> [ 6.761064] snd_hda_intel 0000:01:00.1: Disabling MSI >> [ 6.761077] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client >> [ 6.794382] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13 >> [ 6.794484] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14 >> [ 6.794566] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15 >> [ 6.794649] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16 >> [ 6.806832] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line >> [ 6.806839] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) >> [ 6.806842] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) >> [ 6.806845] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 >> [ 6.806847] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0 >> [ 6.806849] snd_hda_codec_realtek hdaudioC0D0: inputs: >> [ 6.806851] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 >> [ 6.806853] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 >> [ 6.806855] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a >> [ 6.879588] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 >> [ 6.879697] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input18 >> [ 6.879804] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input19 >> [ 6.879915] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input20 >> [ 6.879980] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input21 >> [ 6.924297] kvm_amd: TSC scaling supported >> [ 6.924301] kvm_amd: Nested Virtualization enabled >> [ 6.924303] kvm_amd: Nested Paging enabled >> [ 6.924310] kvm_amd: LBR virtualization supported >> [ 7.482049] EXT4-fs (sdb1): mounted filesystem 03ce297b-4be8-4886-953d-2d2cc4bd0862 r/w with ordered data mode. Quota mode: none. >> [ 7.574255] ata2: limiting SATA link speed to 1.5 Gbps >> [ 7.574266] ata2.00: exception Emask 0x10 SAct 0x2000000 SErr 0x40d0002 action 0xe frozen >> [ 7.574273] ata2.00: irq_stat 0x00000040, connection status changed >> [ 7.574277] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 7.574288] ata2.00: failed command: READ FPDMA QUEUED >> [ 7.574292] ata2.00: cmd 60/08:c8:78:9f:ae/00:00:02:00:00/40 tag 25 ncq dma 4096 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 7.574307] ata2.00: status: { DRDY } >> [ 7.574315] ata2: hard resetting link >> [ 8.471010] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 8.472037] ata2.00: configured for UDMA/133 >> [ 8.482188] sd 1:0:0:0: [sda] tag#25 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s >> [ 8.482199] sd 1:0:0:0: [sda] tag#25 Sense Key : Illegal Request [current] >> [ 8.482205] sd 1:0:0:0: [sda] tag#25 Add. Sense: Unaligned write command >> [ 8.482211] sd 1:0:0:0: [sda] tag#25 CDB: Read(10) 28 00 02 ae 9f 78 00 00 08 00 >> [ 8.482215] I/O error, dev sda, sector 44998520 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 >> [ 8.482247] ata2: EH complete >> [ 9.485245] NET: Registered PF_ALG protocol family >> [ 9.584213] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC) >> [ 9.774328] r8169 0000:03:00.0 enp3s0: Link is Down >> [ 13.954278] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x40d0002 action 0xe frozen >> [ 13.954291] ata2.00: irq_stat 0x00000040, connection status changed >> [ 13.954296] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 13.954304] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 13.954307] ata2.00: cmd 61/10:00:e8:03:40/00:00:02:00:00/40 tag 0 ncq dma 8192 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 13.954322] ata2.00: status: { DRDY } >> [ 13.954333] ata2: hard resetting link >> [ 14.850920] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 14.851963] ata2.00: configured for UDMA/133 >> [ 14.862106] ata2: EH complete >> [ 15.427587] ata2.00: exception Emask 0x10 SAct 0x20000 SErr 0x40d0002 action 0xe frozen >> [ 15.427600] ata2.00: irq_stat 0x00000040, connection status changed >> [ 15.427604] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 15.427614] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 15.427618] ata2.00: cmd 61/38:88:d8:63:d1/00:00:06:00:00/40 tag 17 ncq dma 28672 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 15.427633] ata2.00: status: { DRDY } >> [ 15.427643] ata2: hard resetting link >> [ 16.324266] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 16.325269] ata2.00: configured for UDMA/133 >> [ 16.335415] ata2: EH complete >> [ 16.717613] ata2.00: exception Emask 0x10 SAct 0x7800000f SErr 0x40d0002 action 0xe frozen >> [ 16.717625] ata2.00: irq_stat 0x00000040, connection status changed >> [ 16.717630] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 16.717637] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 16.717641] ata2.00: cmd 61/08:00:c0:83:49/00:00:00:00:00/40 tag 0 ncq dma 4096 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 16.717656] ata2.00: status: { DRDY } >> [ 16.717661] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 16.717664] ata2.00: cmd 61/08:08:d0:83:49/00:00:00:00:00/40 tag 1 ncq dma 4096 out >> res 40/00:a0:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error) >> [ 16.717678] ata2.00: status: { DRDY } >> [ 16.717682] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 16.717685] ata2.00: cmd 61/e0:10:e0:83:49/00:00:00:00:00/40 tag 2 ncq dma 114688 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 16.717698] ata2.00: status: { DRDY } >> [ 16.717702] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 16.717705] ata2.00: cmd 61/48:18:c8:84:49/00:00:00:00:00/40 tag 3 ncq dma 36864 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 16.717717] ata2.00: status: { DRDY } >> [ 16.717724] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 16.717727] ata2.00: cmd 61/08:d8:00:68:a0/00:00:0b:00:00/40 tag 27 ncq dma 4096 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 16.717739] ata2.00: status: { DRDY } >> [ 16.717743] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 16.717746] ata2.00: cmd 61/88:e0:10:83:49/00:00:00:00:00/40 tag 28 ncq dma 69632 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 16.717759] ata2.00: status: { DRDY } >> [ 16.717763] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 16.717766] ata2.00: cmd 61/08:e8:a0:83:49/00:00:00:00:00/40 tag 29 ncq dma 4096 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 16.717778] ata2.00: status: { DRDY } >> [ 16.717782] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 16.717785] ata2.00: cmd 61/08:f0:b0:83:49/00:00:00:00:00/40 tag 30 ncq dma 4096 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 16.717797] ata2.00: status: { DRDY } >> [ 16.717803] ata2: hard resetting link >> [ 17.614259] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 17.615251] ata2.00: configured for UDMA/133 >> [ 17.625418] ata2: EH complete >> [ 20.014269] ata2.00: limiting speed to UDMA/100:PIO4 >> [ 20.014279] ata2.00: exception Emask 0x10 SAct 0x20000 SErr 0x40d0002 action 0xe frozen >> [ 20.014286] ata2.00: irq_stat 0x00000040, connection status changed >> [ 20.014290] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 20.014299] ata2.00: failed command: READ FPDMA QUEUED >> [ 20.014303] ata2.00: cmd 60/20:88:60:3d:5e/00:00:0b:00:00/40 tag 17 ncq dma 16384 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 20.014318] ata2.00: status: { DRDY } >> [ 20.014327] ata2: hard resetting link >> [ 20.910918] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 20.911959] ata2.00: configured for UDMA/100 >> [ 20.922108] sd 1:0:0:0: [sda] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s >> [ 20.922118] sd 1:0:0:0: [sda] tag#17 Sense Key : Illegal Request [current] >> [ 20.922125] sd 1:0:0:0: [sda] tag#17 Add. Sense: Unaligned write command >> [ 20.922131] sd 1:0:0:0: [sda] tag#17 CDB: Read(10) 28 00 0b 5e 3d 60 00 00 20 00 >> [ 20.922135] I/O error, dev sda, sector 190725472 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 >> [ 20.922167] ata2: EH complete >> [ 22.487591] ata2.00: exception Emask 0x10 SAct 0x2000 SErr 0x40d0002 action 0xe frozen >> [ 22.487604] ata2.00: irq_stat 0x00000040, connection status changed >> [ 22.487609] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 22.487618] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 22.487622] ata2.00: cmd 61/08:68:f0:03:40/00:00:02:00:00/40 tag 13 ncq dma 4096 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 22.487637] ata2.00: status: { DRDY } >> [ 22.487647] ata2: hard resetting link >> [ 23.384251] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 23.385285] ata2.00: configured for UDMA/100 >> [ 23.395434] ata2: EH complete >> [ 23.576270] systemd-journald[293]: /var/log/journal/ca3d73a04dc345538c9904a96756e41e/user-1000.journal: Journal file uses a different sequence number ID, rotating. >> [ 25.040943] ata2.00: exception Emask 0x10 SAct 0xd8 SErr 0x40d0002 action 0xe frozen >> [ 25.040957] ata2.00: irq_stat 0x00000040, connection status changed >> [ 25.040962] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 25.040970] ata2.00: failed command: READ FPDMA QUEUED >> [ 25.040974] ata2.00: cmd 60/08:18:88:f8:87/00:00:04:00:00/40 tag 3 ncq dma 4096 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 25.040989] ata2.00: status: { DRDY } >> [ 25.040994] ata2.00: failed command: READ FPDMA QUEUED >> [ 25.040997] ata2.00: cmd 60/68:20:a8:a9:50/00:00:05:00:00/40 tag 4 ncq dma 53248 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 25.041011] ata2.00: status: { DRDY } >> [ 25.041015] ata2.00: failed command: READ FPDMA QUEUED >> [ 25.041018] ata2.00: cmd 60/b0:30:08:ac:50/02:00:05:00:00/40 tag 6 ncq dma 352256 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 25.041031] ata2.00: status: { DRDY } >> [ 25.041035] ata2.00: failed command: READ FPDMA QUEUED >> [ 25.041038] ata2.00: cmd 60/f0:38:b8:af:50/03:00:05:00:00/40 tag 7 ncq dma 516096 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 25.041050] ata2.00: status: { DRDY } >> [ 25.041059] ata2: hard resetting link >> [ 25.907668] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 25.908712] ata2.00: configured for UDMA/100 >> [ 25.918870] sd 1:0:0:0: [sda] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s >> [ 25.918881] sd 1:0:0:0: [sda] tag#4 Sense Key : Illegal Request [current] >> [ 25.918888] sd 1:0:0:0: [sda] tag#4 Add. Sense: Unaligned write command >> [ 25.918894] sd 1:0:0:0: [sda] tag#4 CDB: Read(10) 28 00 05 50 a9 a8 00 00 68 00 >> [ 25.918898] I/O error, dev sda, sector 89172392 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 0 >> [ 25.918935] sd 1:0:0:0: [sda] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s >> [ 25.918951] sd 1:0:0:0: [sda] tag#6 Sense Key : Illegal Request [current] >> [ 25.918958] sd 1:0:0:0: [sda] tag#6 Add. Sense: Unaligned write command >> [ 25.918965] sd 1:0:0:0: [sda] tag#6 CDB: Read(10) 28 00 05 50 ac 08 00 02 b0 00 >> [ 25.918969] I/O error, dev sda, sector 89173000 op 0x0:(READ) flags 0x80700 phys_seg 86 prio class 0 >> [ 25.918994] sd 1:0:0:0: [sda] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s >> [ 25.919001] sd 1:0:0:0: [sda] tag#7 Sense Key : Illegal Request [current] >> [ 25.919007] sd 1:0:0:0: [sda] tag#7 Add. Sense: Unaligned write command >> [ 25.919014] sd 1:0:0:0: [sda] tag#7 CDB: Read(10) 28 00 05 50 af b8 00 03 f0 00 >> [ 25.919018] I/O error, dev sda, sector 89173944 op 0x0:(READ) flags 0x80700 phys_seg 125 prio class 0 >> [ 25.919037] ata2: EH complete >> [ 28.054255] ata2.00: exception Emask 0x10 SAct 0x180 SErr 0x40d0002 action 0xe frozen >> [ 28.054267] ata2.00: irq_stat 0x00000040, connection status changed >> [ 28.054272] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 28.054280] ata2.00: failed command: READ FPDMA QUEUED >> [ 28.054284] ata2.00: cmd 60/f8:38:00:25:88/00:00:04:00:00/40 tag 7 ncq dma 126976 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 28.054299] ata2.00: status: { DRDY } >> [ 28.054304] ata2.00: failed command: READ FPDMA QUEUED >> [ 28.054307] ata2.00: cmd 60/08:40:f8:25:88/00:00:04:00:00/40 tag 8 ncq dma 4096 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 28.054321] ata2.00: status: { DRDY } >> [ 28.054330] ata2: hard resetting link >> [ 28.950942] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 28.951968] ata2.00: configured for UDMA/100 >> [ 28.962123] sd 1:0:0:0: [sda] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s >> [ 28.962133] sd 1:0:0:0: [sda] tag#7 Sense Key : Illegal Request [current] >> [ 28.962139] sd 1:0:0:0: [sda] tag#7 Add. Sense: Unaligned write command >> [ 28.962145] sd 1:0:0:0: [sda] tag#7 CDB: Read(10) 28 00 04 88 25 00 00 00 f8 00 >> [ 28.962149] I/O error, dev sda, sector 76031232 op 0x0:(READ) flags 0x80700 phys_seg 31 prio class 0 >> [ 28.962186] ata2: EH complete >> [ 31.660931] ata2.00: limiting speed to UDMA/33:PIO4 >> [ 31.660942] ata2.00: exception Emask 0x10 SAct 0x20000 SErr 0x40d0002 action 0xe frozen >> [ 31.660948] ata2.00: irq_stat 0x00000040, connection status changed >> [ 31.660952] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 31.660962] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 31.660965] ata2.00: cmd 61/20:88:f8:68:d1/00:00:06:00:00/40 tag 17 ncq dma 16384 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 31.660980] ata2.00: status: { DRDY } >> [ 31.660989] ata2: hard resetting link >> [ 32.557680] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 32.558714] ata2.00: configured for UDMA/33 >> [ 32.568903] ata2: EH complete >> [ 33.154256] ata2.00: exception Emask 0x10 SAct 0x38800000 SErr 0x40d0002 action 0xe frozen >> [ 33.154269] ata2.00: irq_stat 0x00000040, connection status changed >> [ 33.154273] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 33.154284] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 33.154287] ata2.00: cmd 61/b8:b8:20:be:98/01:00:09:00:00/40 tag 23 ncq dma 225280 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 33.154302] ata2.00: status: { DRDY } >> [ 33.154308] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 33.154311] ata2.00: cmd 61/08:d8:00:28:fc/00:00:0a:00:00/40 tag 27 ncq dma 4096 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 33.154324] ata2.00: status: { DRDY } >> [ 33.154329] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 33.154332] ata2.00: cmd 61/d8:e0:b0:8b:d6/01:00:08:00:00/40 tag 28 ncq dma 241664 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 33.154345] ata2.00: status: { DRDY } >> [ 33.154349] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 33.154352] ata2.00: cmd 61/08:e8:10:78:9b/00:00:04:00:00/40 tag 29 ncq dma 4096 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 33.154364] ata2.00: status: { DRDY } >> [ 33.154371] ata2: hard resetting link >> [ 34.050956] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 34.051959] ata2.00: configured for UDMA/33 >> [ 34.062160] ata2: EH complete >> [ 37.637589] ata2.00: exception Emask 0x10 SAct 0x10400 SErr 0x40d0002 action 0xe frozen >> [ 37.637602] ata2.00: irq_stat 0x00000040, connection status changed >> [ 37.637606] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 37.637615] ata2.00: failed command: WRITE FPDMA QUEUED >> [ 37.637618] ata2.00: cmd 61/18:50:20:69:d1/00:00:06:00:00/40 tag 10 ncq dma 12288 out >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 37.637633] ata2.00: status: { DRDY } >> [ 37.637639] ata2.00: failed command: READ FPDMA QUEUED >> [ 37.637643] ata2.00: cmd 60/20:80:90:f5:26/00:00:02:00:00/40 tag 16 ncq dma 16384 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 37.637656] ata2.00: status: { DRDY } >> [ 37.637664] ata2: hard resetting link >> [ 38.504247] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 38.505282] ata2.00: configured for UDMA/33 >> [ 38.515438] sd 1:0:0:0: [sda] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s >> [ 38.515448] sd 1:0:0:0: [sda] tag#16 Sense Key : Illegal Request [current] >> [ 38.515455] sd 1:0:0:0: [sda] tag#16 Add. Sense: Unaligned write command >> [ 38.515461] sd 1:0:0:0: [sda] tag#16 CDB: Read(10) 28 00 02 26 f5 90 00 00 20 00 >> [ 38.515464] I/O error, dev sda, sector 36107664 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0 >> [ 38.515492] ata2: EH complete >> [ 40.834267] ata2.00: exception Emask 0x10 SAct 0x200000 SErr 0x40d0002 action 0xe frozen >> [ 40.834280] ata2.00: irq_stat 0x00000040, connection status changed >> [ 40.834285] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } >> [ 40.834295] ata2.00: failed command: READ FPDMA QUEUED >> [ 40.834299] ata2.00: cmd 60/20:a8:f8:3c:35/00:00:02:00:00/40 tag 21 ncq dma 16384 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error) >> [ 40.834314] ata2.00: status: { DRDY } >> [ 40.834323] ata2: hard resetting link >> [ 41.730960] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >> [ 41.732007] ata2.00: configured for UDMA/33 >> [ 41.742199] sd 1:0:0:0: [sda] tag#21 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s >> [ 41.742211] sd 1:0:0:0: [sda] tag#21 Sense Key : Illegal Request [current] >> [ 41.742218] sd 1:0:0:0: [sda] tag#21 Add. Sense: Unaligned write command >> [ 41.742224] sd 1:0:0:0: [sda] tag#21 CDB: Read(10) 28 00 02 35 3c f8 00 00 20 00 >> [ 41.742228] I/O error, dev sda, sector 37043448 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0 >> [ 41.742263] ata2: EH complete -- Jens Axboe
