Hi, Jose
On Thu, 23 May 2024 at 14:45, Jose Ignacio Tornos Martinez
<jtornosm@xxxxxxxxxx> wrote:
>
> Hello Yongqin,
>
> Again, not a lot of information from the logs, but perhaps you coud give me
> more information for your scenario.
>
> Could you try to execute the down interface operation, mac assignment and
> the up interface operation from command line?
> That works for me.
When I tried the down and up operations manually from the command line,
it worked.
But it only worked after I ran the down and up operations after the boot.
It fails to work by default after the boot for both the fresh deployment,
and for the later reboot
One thing I noticed is that the following message was printed twice
"ax88179_178a 2-3:1.0 eth0: ax88179 - Link status is: 1"
after I ran the up operation,
Is that expected?
For details, please check the log here:
https://gist.github.com/liuyq/be8f5305d538067a344001f1d35f677b
> Maybe some synchronization issue is happening in your boot operation.
> Could you provide more information about how/when you are doing the
> commented operations to try to reproduce?
The scripts are simple, here are the two scripts for Android build:
https://android.googlesource.com/device/linaro/dragonboard/+/refs/heads/main/shared/utils/ethaddr/ethaddr.rc
https://android.googlesource.com/device/linaro/dragonboard/+/refs/heads/main/shared/utils/ethaddr/set_ethaddr.sh
Is the one to run the down/change mac/up operations script.
Not sure why the up in the script does not work, but works when run manually.
--
Best Regards,
Yongqin Liu
---------------------------------------------------------------
#mailing list
linaro-android@xxxxxxxxxxxxxxxx
http://lists.linaro.org/mailman/listinfo/linaro-android
