.setup_interface first gets called with a "target" value of
NAND_DATA_IFACE_CHECK_ONLY, in which case an error is expected
if the controller driver does not support the timing mode (NVDDR).
Fixes: a9ecc8c814e9 ("mtd: rawnand: Choose the best timings, NV-DDR included")
Signed-off-by: Val Packett <val@xxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
drivers/mtd/nand/raw/rockchip-nand-controller.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/nand/raw/rockchip-nand-controller.c b/drivers/mtd/nand/raw/rockchip-nand-controller.c
index 7baaef69d..555804476 100644
--- a/drivers/mtd/nand/raw/rockchip-nand-controller.c
+++ b/drivers/mtd/nand/raw/rockchip-nand-controller.c
@@ -420,13 +420,13 @@ static int rk_nfc_setup_interface(struct nand_chip *chip, int target,
u32 rate, tc2rw, trwpw, trw2c;
u32 temp;
- if (target < 0)
- return 0;
-
timings = nand_get_sdr_timings(conf);
if (IS_ERR(timings))
return -EOPNOTSUPP;
+ if (target < 0)
+ return 0;
+
if (IS_ERR(nfc->nfc_clk))
rate = clk_get_rate(nfc->ahb_clk);
else
--
2.45.0
