The EXT_RGMII_OOB_CTRL register can be written from different
contexts. It is predominantly written from the adjust_link
handler which is synchronized by the phydev->lock, but can
also be written from a different context when configuring the
mii in bcmgenet_mii_config().
The chances of contention are quite low, but it is conceivable
that adjust_link could occur during resume when WoL is enabled
so use the phydev->lock synchronizer in bcmgenet_mii_config()
to be sure.
Fixes: afe3f907d20f ("net: bcmgenet: power on MII block for all MII modes")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Doug Berger <opendmb@xxxxxxxxx>
Acked-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
(cherry picked from commit d85cf67a339685beae1d0aee27b7f61da95455be)
Signed-off-by: Doug Berger <opendmb@xxxxxxxxx>
---
drivers/net/ethernet/broadcom/genet/bcmmii.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index becc717aad13..7c56f76bad11 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -264,6 +264,7 @@ int bcmgenet_mii_config(struct net_device *dev, bool init)
* block for the interface to work
*/
if (priv->ext_phy) {
+ mutex_lock(&phydev->lock);
reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL);
reg &= ~ID_MODE_DIS;
reg |= id_mode_dis;
@@ -272,6 +273,7 @@ int bcmgenet_mii_config(struct net_device *dev, bool init)
else
reg |= RGMII_MODE_EN;
bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);
+ mutex_unlock(&phydev->lock);
}
if (init)
--
2.34.1
