Re: [PATCH v2 2/2] x86/sgx: Resolve EREMOVE page vs EAUG page data race

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Dmitrii,

On 5/15/2024 6:12 AM, Dmitrii Kuvaiskii wrote:
> Two enclave threads may try to add and remove the same enclave page
> simultaneously (e.g., if the SGX runtime supports both lazy allocation
> and MADV_DONTNEED semantics). Consider some enclave page added to the
> enclave. User space decides to temporarily remove this page (e.g.,
> emulating the MADV_DONTNEED semantics) on CPU1. At the same time, user
> space performs a memory access on the same page on CPU2, which results
> in a #PF and ultimately in sgx_vma_fault(). Scenario proceeds as
> follows:
> 
> /*
>  * CPU1: User space performs
>  * ioctl(SGX_IOC_ENCLAVE_REMOVE_PAGES)
>  * on enclave page X
>  */
> sgx_encl_remove_pages() {
> 
>   mutex_lock(&encl->lock);
> 
>   entry = sgx_encl_load_page(encl);
>   /*
>    * verify that page is
>    * trimmed and accepted
>    */
> 
>   mutex_unlock(&encl->lock);
> 
>   /*
>    * remove PTE entry; cannot
>    * be performed under lock
>    */
>   sgx_zap_enclave_ptes(encl);
>                                  /*
>                                   * Fault on CPU2 on same page X
>                                   */
>                                  sgx_vma_fault() {
>                                    /*
>                                     * PTE entry was removed, but the
>                                     * page is still in enclave's xarray
>                                     */
>                                    xa_load(&encl->page_array) != NULL ->
>                                    /*
>                                     * SGX driver thinks that this page
>                                     * was swapped out and loads it
>                                     */
>                                    mutex_lock(&encl->lock);
>                                    /*
>                                     * this is effectively a no-op
>                                     */
>                                    entry = sgx_encl_load_page_in_vma();
>                                    /*
>                                     * add PTE entry
>                                     *
>                                     * *BUG*: a PTE is installed for a
>                                     * page in process of being removed
>                                     */
>                                    vmf_insert_pfn(...);
> 
>                                    mutex_unlock(&encl->lock);
>                                    return VM_FAULT_NOPAGE;
>                                  }
>   /*
>    * continue with page removal
>    */
>   mutex_lock(&encl->lock);
> 
>   sgx_encl_free_epc_page(epc_page) {
>     /*
>      * remove page via EREMOVE
>      */
>     /*
>      * free EPC page
>      */
>     sgx_free_epc_page(epc_page);
>   }
> 
>   xa_erase(&encl->page_array);
> 
>   mutex_unlock(&encl->lock);
> }
> 
> Here, CPU1 removed the page. However CPU2 installed the PTE entry on the
> same page. This enclave page becomes perpetually inaccessible (until
> another SGX_IOC_ENCLAVE_REMOVE_PAGES ioctl). This is because the page is
> marked accessible in the PTE entry but is not EAUGed, and any subsequent
> access to this page raises a fault: with the kernel believing there to
> be a valid VMA, the unlikely error code X86_PF_SGX encountered by code
> path do_user_addr_fault() -> access_error() causes the SGX driver's
> sgx_vma_fault() to be skipped and user space receives a SIGSEGV instead.
> The userspace SIGSEGV handler cannot perform EACCEPT because the page
> was not EAUGed. Thus, the user space is stuck with the inaccessible
> page.
> 
> Fix this race by forcing the fault handler on CPU2 to back off if the
> page is currently being removed (on CPU1). This is achieved by
> introducing a new flag SGX_ENCL_PAGE_BEING_REMOVED, which is unset by
> default and set only right-before the first mutex_unlock() in
> sgx_encl_remove_pages(). Upon loading the page, CPU2 checks whether this
> page is being removed, and if yes then CPU2 backs off and waits until
> the page is completely removed. After that, any memory access to this
> page results in a normal "allocate and EAUG a page on #PF" flow.
> 
> Fixes: 9849bb27152c ("x86/sgx: Support complete page removal")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Dmitrii Kuvaiskii <dmitrii.kuvaiskii@xxxxxxxxx>
> ---
>  arch/x86/kernel/cpu/sgx/encl.c  | 3 ++-
>  arch/x86/kernel/cpu/sgx/encl.h  | 3 +++
>  arch/x86/kernel/cpu/sgx/ioctl.c | 1 +
>  3 files changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/x86/kernel/cpu/sgx/encl.c b/arch/x86/kernel/cpu/sgx/encl.c
> index 41f14b1a3025..7ccd8b2fce5f 100644
> --- a/arch/x86/kernel/cpu/sgx/encl.c
> +++ b/arch/x86/kernel/cpu/sgx/encl.c
> @@ -257,7 +257,8 @@ static struct sgx_encl_page *__sgx_encl_load_page(struct sgx_encl *encl,
>  
>  	/* Entry successfully located. */
>  	if (entry->epc_page) {
> -		if (entry->desc & SGX_ENCL_PAGE_BEING_RECLAIMED)
> +		if (entry->desc & (SGX_ENCL_PAGE_BEING_RECLAIMED |
> +				   SGX_ENCL_PAGE_BEING_REMOVED))
>  			return ERR_PTR(-EBUSY);
>  
>  		return entry;
> diff --git a/arch/x86/kernel/cpu/sgx/encl.h b/arch/x86/kernel/cpu/sgx/encl.h
> index f94ff14c9486..fff5f2293ae7 100644
> --- a/arch/x86/kernel/cpu/sgx/encl.h
> +++ b/arch/x86/kernel/cpu/sgx/encl.h
> @@ -25,6 +25,9 @@
>  /* 'desc' bit marking that the page is being reclaimed. */
>  #define SGX_ENCL_PAGE_BEING_RECLAIMED	BIT(3)
>  
> +/* 'desc' bit marking that the page is being removed. */
> +#define SGX_ENCL_PAGE_BEING_REMOVED	BIT(2)
> +
>  struct sgx_encl_page {
>  	unsigned long desc;
>  	unsigned long vm_max_prot_bits:8;
> diff --git a/arch/x86/kernel/cpu/sgx/ioctl.c b/arch/x86/kernel/cpu/sgx/ioctl.c
> index b65ab214bdf5..c542d4dd3e64 100644
> --- a/arch/x86/kernel/cpu/sgx/ioctl.c
> +++ b/arch/x86/kernel/cpu/sgx/ioctl.c
> @@ -1142,6 +1142,7 @@ static long sgx_encl_remove_pages(struct sgx_encl *encl,
>  		 * Do not keep encl->lock because of dependency on
>  		 * mmap_lock acquired in sgx_zap_enclave_ptes().
>  		 */
> +		entry->desc |= SGX_ENCL_PAGE_BEING_REMOVED;
>  		mutex_unlock(&encl->lock);
>  
>  		sgx_zap_enclave_ptes(encl, addr);

Thank you very much for tracking down and fixing this issue.

Acked-by: Reinette Chatre <reinette.chatre@xxxxxxxxx>

Reinette




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux