6.8-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sean Anderson <sean.anderson@xxxxxxxxx>
commit d5887dc6b6c054d0da3cd053afc15b7be1f45ff6 upstream.
Sandisk SN530 NVMe drives have broken MSIs. On systems without MSI-X
support, all commands time out resulting in the following message:
nvme nvme0: I/O tag 12 (100c) QID 0 timeout, completion polled
These timeouts cause the boot to take an excessively-long time (over 20
minutes) while the initial command queue is flushed.
Address this by adding a quirk for drives with buggy MSIs. The lspci
output for this device (recorded on a system with MSI-X support) is:
02:00.0 Non-Volatile memory controller: Sandisk Corp Device 5008 (rev 01) (prog-if 02 [NVM Express])
Subsystem: Sandisk Corp Device 5008
Flags: bus master, fast devsel, latency 0, IRQ 16, NUMA node 0
Memory at f7e00000 (64-bit, non-prefetchable) [size=16K]
Memory at f7e04000 (64-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 3
Capabilities: [90] MSI: Enable- Count=1/32 Maskable- 64bit+
Capabilities: [b0] MSI-X: Enable+ Count=17 Masked-
Capabilities: [c0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [150] Device Serial Number 00-00-00-00-00-00-00-00
Capabilities: [1b8] Latency Tolerance Reporting
Capabilities: [300] Secondary PCI Express
Capabilities: [900] L1 PM Substates
Kernel driver in use: nvme
Kernel modules: nvme
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Sean Anderson <sean.anderson@xxxxxxxxx>
Reviewed-by: Christoph Hellwig <hch@xxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/nvme/host/nvme.h | 5 +++++
drivers/nvme/host/pci.c | 14 +++++++++++---
2 files changed, 16 insertions(+), 3 deletions(-)
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -162,6 +162,11 @@ enum nvme_quirks {
* Disables simple suspend/resume path.
*/
NVME_QUIRK_FORCE_NO_SIMPLE_SUSPEND = (1 << 20),
+
+ /*
+ * MSI (but not MSI-X) interrupts are broken and never fire.
+ */
+ NVME_QUIRK_BROKEN_MSI = (1 << 21),
};
/*
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -2218,6 +2218,7 @@ static int nvme_setup_irqs(struct nvme_d
.priv = dev,
};
unsigned int irq_queues, poll_queues;
+ unsigned int flags = PCI_IRQ_ALL_TYPES | PCI_IRQ_AFFINITY;
/*
* Poll queues don't need interrupts, but we need at least one I/O queue
@@ -2241,8 +2242,10 @@ static int nvme_setup_irqs(struct nvme_d
irq_queues = 1;
if (!(dev->ctrl.quirks & NVME_QUIRK_SINGLE_VECTOR))
irq_queues += (nr_io_queues - poll_queues);
- return pci_alloc_irq_vectors_affinity(pdev, 1, irq_queues,
- PCI_IRQ_ALL_TYPES | PCI_IRQ_AFFINITY, &affd);
+ if (dev->ctrl.quirks & NVME_QUIRK_BROKEN_MSI)
+ flags &= ~PCI_IRQ_MSI;
+ return pci_alloc_irq_vectors_affinity(pdev, 1, irq_queues, flags,
+ &affd);
}
static unsigned int nvme_max_io_queues(struct nvme_dev *dev)
@@ -2471,6 +2474,7 @@ static int nvme_pci_enable(struct nvme_d
{
int result = -ENOMEM;
struct pci_dev *pdev = to_pci_dev(dev->dev);
+ unsigned int flags = PCI_IRQ_ALL_TYPES;
if (pci_enable_device_mem(pdev))
return result;
@@ -2487,7 +2491,9 @@ static int nvme_pci_enable(struct nvme_d
* interrupts. Pre-enable a single MSIX or MSI vec for setup. We'll
* adjust this later.
*/
- result = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
+ if (dev->ctrl.quirks & NVME_QUIRK_BROKEN_MSI)
+ flags &= ~PCI_IRQ_MSI;
+ result = pci_alloc_irq_vectors(pdev, 1, 1, flags);
if (result < 0)
goto disable;
@@ -3384,6 +3390,8 @@ static const struct pci_device_id nvme_i
.driver_data = NVME_QUIRK_DELAY_BEFORE_CHK_RDY |
NVME_QUIRK_DISABLE_WRITE_ZEROES|
NVME_QUIRK_IGNORE_DEV_SUBNQN, },
+ { PCI_DEVICE(0x15b7, 0x5008), /* Sandisk SN530 */
+ .driver_data = NVME_QUIRK_BROKEN_MSI },
{ PCI_DEVICE(0x1987, 0x5012), /* Phison E12 */
.driver_data = NVME_QUIRK_BOGUS_NID, },
{ PCI_DEVICE(0x1987, 0x5016), /* Phison E16 */
