On Fri, Dec 26, 2014 at 01:28:20PM -0600, Felipe Balbi wrote:
> STATUS register can be modified by the HW, so we
> should bypass cache because of that.
>
> In the case of INT[12] registers, they are the ones
> that actually clear the IRQ source at the time they
> are read. If we rely on the cache for them, we will
> never be able to clear the interrupt, which will cause
> our IRQ line to be disabled due to IRQ throttling.
>
> Fixes: 44b4dc6 mfd: tps65218: Add driver for the TPS65218 PMIC
> Cc: <stable@xxxxxxxxxxxxxxx> # v3.15+
> Cc: Keerthy <j-keerthy@xxxxxx>
> Cc: Lee Jones <lee.jones@xxxxxxxxxx>
> Signed-off-by: Felipe Balbi <balbi@xxxxxx>
ping
> ---
> drivers/mfd/tps65218.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/mfd/tps65218.c b/drivers/mfd/tps65218.c
> index 0d256cb..2243f75 100644
> --- a/drivers/mfd/tps65218.c
> +++ b/drivers/mfd/tps65218.c
> @@ -125,10 +125,21 @@ int tps65218_clear_bits(struct tps65218 *tps, unsigned int reg,
> }
> EXPORT_SYMBOL_GPL(tps65218_clear_bits);
>
> +static const struct regmap_range tps65218_yes_ranges[] = {
> + regmap_reg_range(TPS65218_REG_INT1, TPS65218_REG_INT2),
> + regmap_reg_range(TPS65218_REG_STATUS, TPS65218_REG_STATUS),
> +};
> +
> +static const struct regmap_access_table tps65218_volatile_table = {
> + .yes_ranges = tps65218_yes_ranges,
> + .n_yes_ranges = ARRAY_SIZE(tps65218_yes_ranges),
> +};
> +
> static struct regmap_config tps65218_regmap_config = {
> .reg_bits = 8,
> .val_bits = 8,
> .cache_type = REGCACHE_RBTREE,
> + .volatile_table = &tps65218_volatile_table,
> };
>
> static const struct regmap_irq tps65218_irqs[] = {
> --
> 2.2.0
>
--
balbi
Attachment:
signature.asc
Description: Digital signature