On Fri, May 10, 2024 at 11:08:28AM +0200, Jose Ignacio Tornos Martinez wrote:
> The idea was to keep only one reset at initialization stage in order to
> reduce the total delay, or the reset from usbnet_probe or the reset from
> usbnet_open.
>
> I have seen that restarting from usbnet_probe is necessary to avoid doing
> too complex things. But when the link is set to down/up (for example to
> configure a different mac address) the link is not correctly recovered
> unless a reset is commanded from usbnet_open.
>
> So, detect the initialization stage (first call) to not reset from
> usbnet_open after the reset from usbnet_probe and after this stage, always
> reset from usbnet_open too (when the link needs to be rechecked).
>
> Apply to all the possible devices, the behavior now is going to be the same.
>
> cc: stable@xxxxxxxxxxxxxxx # 6.6+
> Fixes: 56f78615bcb1 ("net: usb: ax88179_178a: avoid writing the mac address before first reading")
> Reported-by: Isaac Ganoung <inventor500@xxxxxxxxxxx>
> Reported-by: Yongqin Liu <yongqin.liu@xxxxxxxxxx>
> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@xxxxxxxxxx>
Reviewed-by: Simon Horman <horms@xxxxxxxxxx>
