6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: MD Danish Anwar <danishanwar@xxxxxx>
[ Upstream commit 6c9cd59dbcb09a2122b5ce0dfc07c74e6fc00dc0 ]
The DP83869 driver sets the MII bit (needed for PHY to work in MII mode)
only if the op-mode is either DP83869_100M_MEDIA_CONVERT or
DP83869_RGMII_100_BASE.
Some drivers i.e. ICSSG support MII mode with op-mode as
DP83869_RGMII_COPPER_ETHERNET for which the MII bit is not set in dp83869
driver. As a result MII mode on ICSSG doesn't work and below log is seen.
TI DP83869 300b2400.mdio:0f: selected op-mode is not valid with MII mode
icssg-prueth icssg1-eth: couldn't connect to phy ethernet-phy@0
icssg-prueth icssg1-eth: can't phy connect port MII0
Fix this by setting MII bit for DP83869_RGMII_COPPER_ETHERNET op-mode as
well.
Fixes: 94e86ef1b801 ("net: phy: dp83869: support mii mode when rgmii strap cfg is used")
Signed-off-by: MD Danish Anwar <danishanwar@xxxxxx>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@xxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/phy/dp83869.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/dp83869.c b/drivers/net/phy/dp83869.c
index fa8c6fdcf3018..d7aaefb5226b6 100644
--- a/drivers/net/phy/dp83869.c
+++ b/drivers/net/phy/dp83869.c
@@ -695,7 +695,8 @@ static int dp83869_configure_mode(struct phy_device *phydev,
phy_ctrl_val = dp83869->mode;
if (phydev->interface == PHY_INTERFACE_MODE_MII) {
if (dp83869->mode == DP83869_100M_MEDIA_CONVERT ||
- dp83869->mode == DP83869_RGMII_100_BASE) {
+ dp83869->mode == DP83869_RGMII_100_BASE ||
+ dp83869->mode == DP83869_RGMII_COPPER_ETHERNET) {
phy_ctrl_val |= DP83869_OP_MODE_MII;
} else {
phydev_err(phydev, "selected op-mode is not valid with MII mode\n");
--
2.43.0
