The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable@xxxxxxxxxxxxxxx>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 642c984dd0e37dbaec9f87bd1211e5fac1f142bf # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable@xxxxxxxxxxxxxxx>' --in-reply-to '2024042923-sufferer-anywhere-76a7@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: 642c984dd0e3 ("macsec: Detect if Rx skb is macsec-related for offloading devices that update md_dst") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 642c984dd0e37dbaec9f87bd1211e5fac1f142bf Mon Sep 17 00:00:00 2001 From: Rahul Rameshbabu <rrameshbabu@xxxxxxxxxx> Date: Tue, 23 Apr 2024 11:13:04 -0700 Subject: [PATCH] macsec: Detect if Rx skb is macsec-related for offloading devices that update md_dst Can now correctly identify where the packets should be delivered by using md_dst or its absence on devices that provide it. This detection is not possible without device drivers that update md_dst. A fallback pattern should be used for supporting such device drivers. This fallback mode causes multicast messages to be cloned to both the non-macsec and macsec ports, independent of whether the multicast message received was encrypted over MACsec or not. Other non-macsec traffic may also fail to be handled correctly for devices in promiscuous mode. Link: https://lore.kernel.org/netdev/ZULRxX9eIbFiVi7v@hog/ Cc: Sabrina Dubroca <sd@xxxxxxxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx Fixes: 860ead89b851 ("net/macsec: Add MACsec skb_metadata_dst Rx Data path support") Signed-off-by: Rahul Rameshbabu <rrameshbabu@xxxxxxxxxx> Reviewed-by: Benjamin Poirier <bpoirier@xxxxxxxxxx> Reviewed-by: Cosmin Ratiu <cratiu@xxxxxxxxxx> Reviewed-by: Sabrina Dubroca <sd@xxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20240423181319.115860-4-rrameshbabu@xxxxxxxxxx Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx> diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 0206b84284ab..ff016c11b4a0 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -999,10 +999,12 @@ static enum rx_handler_result handle_not_macsec(struct sk_buff *skb) struct metadata_dst *md_dst; struct macsec_rxh_data *rxd; struct macsec_dev *macsec; + bool is_macsec_md_dst; rcu_read_lock(); rxd = macsec_data_rcu(skb->dev); md_dst = skb_metadata_dst(skb); + is_macsec_md_dst = md_dst && md_dst->type == METADATA_MACSEC; list_for_each_entry_rcu(macsec, &rxd->secys, secys) { struct sk_buff *nskb; @@ -1013,14 +1015,42 @@ static enum rx_handler_result handle_not_macsec(struct sk_buff *skb) * the SecTAG, so we have to deduce which port to deliver to. */ if (macsec_is_offloaded(macsec) && netif_running(ndev)) { - struct macsec_rx_sc *rx_sc = NULL; + const struct macsec_ops *ops; - if (md_dst && md_dst->type == METADATA_MACSEC) - rx_sc = find_rx_sc(&macsec->secy, md_dst->u.macsec_info.sci); + ops = macsec_get_ops(macsec, NULL); - if (md_dst && md_dst->type == METADATA_MACSEC && !rx_sc) + if (ops->rx_uses_md_dst && !is_macsec_md_dst) continue; + if (is_macsec_md_dst) { + struct macsec_rx_sc *rx_sc; + + /* All drivers that implement MACsec offload + * support using skb metadata destinations must + * indicate that they do so. + */ + DEBUG_NET_WARN_ON_ONCE(!ops->rx_uses_md_dst); + rx_sc = find_rx_sc(&macsec->secy, + md_dst->u.macsec_info.sci); + if (!rx_sc) + continue; + /* device indicated macsec offload occurred */ + skb->dev = ndev; + skb->pkt_type = PACKET_HOST; + eth_skb_pkt_type(skb, ndev); + ret = RX_HANDLER_ANOTHER; + goto out; + } + + /* This datapath is insecure because it is unable to + * enforce isolation of broadcast/multicast traffic and + * unicast traffic with promiscuous mode on the macsec + * netdev. Since the core stack has no mechanism to + * check that the hardware did indeed receive MACsec + * traffic, it is possible that the response handling + * done by the MACsec port was to a plaintext packet. + * This violates the MACsec protocol standard. + */ if (ether_addr_equal_64bits(hdr->h_dest, ndev->dev_addr)) { /* exact match, divert skb to this port */ @@ -1036,14 +1066,10 @@ static enum rx_handler_result handle_not_macsec(struct sk_buff *skb) break; nskb->dev = ndev; - if (ether_addr_equal_64bits(hdr->h_dest, - ndev->broadcast)) - nskb->pkt_type = PACKET_BROADCAST; - else - nskb->pkt_type = PACKET_MULTICAST; + eth_skb_pkt_type(nskb, ndev); __netif_rx(nskb); - } else if (rx_sc || ndev->flags & IFF_PROMISC) { + } else if (ndev->flags & IFF_PROMISC) { skb->dev = ndev; skb->pkt_type = PACKET_HOST; ret = RX_HANDLER_ANOTHER;
