The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable@xxxxxxxxxxxxxxx>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x de120e1d692d73c7eefa3278837b1eb68f90728a # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable@xxxxxxxxxxxxxxx>' --in-reply-to '2024042357-unnamed-riverboat-0b22@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: de120e1d692d ("KVM: x86/pmu: Set enable bits for GP counters in PERF_GLOBAL_CTRL at "RESET"") f933b88e2015 ("KVM: x86/pmu: Zero out PMU metadata on AMD if PMU is disabled") 1647b52757d5 ("KVM: x86/pmu: Reset the PMU, i.e. stop counters, before refreshing") cbb359d81a26 ("KVM: x86/pmu: Move PMU reset logic to common x86 code") 73554b29bd70 ("KVM: x86/pmu: Synthesize at most one PMI per VM-exit") b29a2acd36dd ("KVM: x86/pmu: Truncate counter value to allowed width on write") 4a2771895ca6 ("KVM: x86/svm/pmu: Add AMD PerfMonV2 support") 1c2bf8a6b045 ("KVM: x86/pmu: Constrain the num of guest counters with kvm_pmu_cap") 13afa29ae489 ("KVM: x86/pmu: Provide Intel PMU's pmc_is_enabled() as generic x86 code") c85cdc1cc1ea ("KVM: x86/pmu: Move handling PERF_GLOBAL_CTRL and friends to common x86") 30dab5c0b65e ("KVM: x86/pmu: Reject userspace attempts to set reserved GLOBAL_STATUS bits") 8de18543dfe3 ("KVM: x86/pmu: Move reprogram_counters() to pmu.h") 53550b89220b ("KVM: x86/pmu: Rename global_ovf_ctrl_mask to global_status_mask") 649bccd7fac9 ("KVM: x86/pmu: Rewrite reprogram_counters() to improve performance") 8bca8c5ce40b ("KVM: VMX: Refactor intel_pmu_{g,}set_msr() to align with other helpers") cdd2fbf6360e ("KVM: x86/pmu: Rename pmc_is_enabled() to pmc_is_globally_enabled()") 957d0f70e97b ("KVM: x86/pmu: Zero out LBR capabilities during PMU refresh") 3a6de51a437f ("KVM: x86/pmu: WARN and bug the VM if PMU is refreshed after vCPU has run") 7e768ce8278b ("KVM: x86/pmu: Zero out pmu->all_valid_pmc_idx each time it's refreshed") e33b6d79acac ("KVM: x86/pmu: Don't tell userspace to save MSRs for non-existent fixed PMCs") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From de120e1d692d73c7eefa3278837b1eb68f90728a Mon Sep 17 00:00:00 2001 From: Sean Christopherson <seanjc@xxxxxxxxxx> Date: Fri, 8 Mar 2024 17:36:40 -0800 Subject: [PATCH] KVM: x86/pmu: Set enable bits for GP counters in PERF_GLOBAL_CTRL at "RESET" Set the enable bits for general purpose counters in IA32_PERF_GLOBAL_CTRL when refreshing the PMU to emulate the MSR's architecturally defined post-RESET behavior. Per Intel's SDM: IA32_PERF_GLOBAL_CTRL: Sets bits n-1:0 and clears the upper bits. and Where "n" is the number of general-purpose counters available in the processor. AMD also documents this behavior for PerfMonV2 CPUs in one of AMD's many PPRs. Do not set any PERF_GLOBAL_CTRL bits if there are no general purpose counters, although a literal reading of the SDM would require the CPU to set either bits 63:0 or 31:0. The intent of the behavior is to globally enable all GP counters; honor the intent, if not the letter of the law. Leaving PERF_GLOBAL_CTRL '0' effectively breaks PMU usage in guests that haven't been updated to work with PMUs that support PERF_GLOBAL_CTRL. This bug was recently exposed when KVM added supported for AMD's PerfMonV2, i.e. when KVM started exposing a vPMU with PERF_GLOBAL_CTRL to guest software that only knew how to program v1 PMUs (that don't support PERF_GLOBAL_CTRL). Failure to emulate the post-RESET behavior results in such guests unknowingly leaving all general purpose counters globally disabled (the entire reason the post-RESET value sets the GP counter enable bits is to maintain backwards compatibility). The bug has likely gone unnoticed because PERF_GLOBAL_CTRL has been supported on Intel CPUs for as long as KVM has existed, i.e. hardly anyone is running guest software that isn't aware of PERF_GLOBAL_CTRL on Intel PMUs. And because up until v6.0, KVM _did_ emulate the behavior for Intel CPUs, although the old behavior was likely dumb luck. Because (a) that old code was also broken in its own way (the history of this code is a comedy of errors), and (b) PERF_GLOBAL_CTRL was documented as having a value of '0' post-RESET in all SDMs before March 2023. Initial vPMU support in commit f5132b01386b ("KVM: Expose a version 2 architectural PMU to a guests") *almost* got it right (again likely by dumb luck), but for some reason only set the bits if the guest PMU was advertised as v1: if (pmu->version == 1) { pmu->global_ctrl = (1 << pmu->nr_arch_gp_counters) - 1; return; } Commit f19a0c2c2e6a ("KVM: PMU emulation: GLOBAL_CTRL MSR should be enabled on reset") then tried to remedy that goof, presumably because guest PMUs were leaving PERF_GLOBAL_CTRL '0', i.e. weren't enabling counters. pmu->global_ctrl = ((1 << pmu->nr_arch_gp_counters) - 1) | (((1ull << pmu->nr_arch_fixed_counters) - 1) << X86_PMC_IDX_FIXED); pmu->global_ctrl_mask = ~pmu->global_ctrl; That was KVM's behavior up until commit c49467a45fe0 ("KVM: x86/pmu: Don't overwrite the pmu->global_ctrl when refreshing") removed *everything*. However, it did so based on the behavior defined by the SDM , which at the time stated that "Global Perf Counter Controls" is '0' at Power-Up and RESET. But then the March 2023 SDM (325462-079US), stealthily changed its "IA-32 and Intel 64 Processor States Following Power-up, Reset, or INIT" table to say: IA32_PERF_GLOBAL_CTRL: Sets bits n-1:0 and clears the upper bits. Note, kvm_pmu_refresh() can be invoked multiple times, i.e. it's not a "pure" RESET flow. But it can only be called prior to the first KVM_RUN, i.e. the guest will only ever observe the final value. Note #2, KVM has always cleared global_ctrl during refresh (see commit f5132b01386b ("KVM: Expose a version 2 architectural PMU to a guests")), i.e. there is no danger of breaking existing setups by clobbering a value set by userspace. Reported-by: Babu Moger <babu.moger@xxxxxxx> Cc: Sandipan Das <sandipan.das@xxxxxxx> Cc: Like Xu <like.xu.linux@xxxxxxxxx> Cc: Mingwei Zhang <mizhang@xxxxxxxxxx> Cc: Dapeng Mi <dapeng1.mi@xxxxxxxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx Reviewed-by: Dapeng Mi <dapeng1.mi@xxxxxxxxxxxxxxx> Tested-by: Dapeng Mi <dapeng1.mi@xxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20240309013641.1413400-2-seanjc@xxxxxxxxxx Signed-off-by: Sean Christopherson <seanjc@xxxxxxxxxx> diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c index c397b28e3d1b..a593b03c9aed 100644 --- a/arch/x86/kvm/pmu.c +++ b/arch/x86/kvm/pmu.c @@ -775,8 +775,20 @@ void kvm_pmu_refresh(struct kvm_vcpu *vcpu) pmu->pebs_data_cfg_mask = ~0ull; bitmap_zero(pmu->all_valid_pmc_idx, X86_PMC_IDX_MAX); - if (vcpu->kvm->arch.enable_pmu) - static_call(kvm_x86_pmu_refresh)(vcpu); + if (!vcpu->kvm->arch.enable_pmu) + return; + + static_call(kvm_x86_pmu_refresh)(vcpu); + + /* + * At RESET, both Intel and AMD CPUs set all enable bits for general + * purpose counters in IA32_PERF_GLOBAL_CTRL (so that software that + * was written for v1 PMUs don't unknowingly leave GP counters disabled + * in the global controls). Emulate that behavior when refreshing the + * PMU so that userspace doesn't need to manually set PERF_GLOBAL_CTRL. + */ + if (kvm_pmu_has_perf_global_ctrl(pmu) && pmu->nr_arch_gp_counters) + pmu->global_ctrl = GENMASK_ULL(pmu->nr_arch_gp_counters - 1, 0); } void kvm_pmu_init(struct kvm_vcpu *vcpu)
