FAILED: patch "[PATCH] serial: stm32: Return IRQ_NONE in the ISR if no handling" failed to apply to 4.19-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y
git checkout FETCH_HEAD
git cherry-pick -x 13c785323b36b845300b256d0e5963c3727667d7
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@xxxxxxxxxxxxxxx>' --in-reply-to '2024042348-galleria-wielder-75a5@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^..

Possible dependencies:

13c785323b36 ("serial: stm32: Return IRQ_NONE in the ISR if no handling happend")
c5d06662551c ("serial: stm32: Use port lock wrappers")
a01ae50d7eae ("serial: stm32: replace access to DMAR bit by dmaengine_pause/resume")
7f28bcea824e ("serial: stm32: group dma pause/resume error handling into single function")
00d1f9c6af0d ("serial: stm32: modify parameter and rename stm32_usart_rx_dma_enabled")
db89728abad5 ("serial: stm32: avoid clearing DMAT bit during transfer")
3f6c02fa712b ("serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler")
d7c76716169d ("serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode")
3bcea529b295 ("serial: stm32: Factor out GPIO RTS toggling into separate function")
037b91ec7729 ("serial: stm32: fix software flow control transfer")
d3d079bde07e ("serial: stm32: prevent TDR register overwrite when sending x_char")
195437d14fb4 ("serial: stm32: correct loop for dma error handling")
2a3bcfe03725 ("serial: stm32: fix flow control transfer in DMA mode")
9a135f16d228 ("serial: stm32: rework TX DMA state condition")
56a23f9319e8 ("serial: stm32: move tx dma terminate DMA to shutdown")
6333a4850621 ("serial: stm32: push DMA RX data before suspending")
6eeb348c8482 ("serial: stm32: terminate / restart DMA transfer at suspend / resume")
e0abc903deea ("serial: stm32: rework RX dma initialization and release")
d1ec8a2eabe9 ("serial: stm32: update throttle and unthrottle ops for dma mode")
33bb2f6ac308 ("serial: stm32: rework RX over DMA")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

>From 13c785323b36b845300b256d0e5963c3727667d7 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@xxxxxxxxxxxxxx>
Date: Wed, 17 Apr 2024 11:03:27 +0200
Subject: [PATCH] serial: stm32: Return IRQ_NONE in the ISR if no handling
 happend
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

If there is a stuck irq that the handler doesn't address, returning
IRQ_HANDLED unconditionally makes it impossible for the irq core to
detect the problem and disable the irq. So only return IRQ_HANDLED if
an event was handled.

A stuck irq is still problematic, but with this change at least it only
makes the UART nonfunctional instead of occupying the (usually only) CPU
by 100% and so stall the whole machine.

Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/5f92603d0dfd8a5b8014b2b10a902d91e0bb881f.1713344161.git.u.kleine-koenig@xxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 58d169e5c1db..d60cbac69194 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -861,6 +861,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
 	const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
 	u32 sr;
 	unsigned int size;
+	irqreturn_t ret = IRQ_NONE;
 
 	sr = readl_relaxed(port->membase + ofs->isr);
 
@@ -869,11 +870,14 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
 	    (sr & USART_SR_TC)) {
 		stm32_usart_tc_interrupt_disable(port);
 		stm32_usart_rs485_rts_disable(port);
+		ret = IRQ_HANDLED;
 	}
 
-	if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG)
+	if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG) {
 		writel_relaxed(USART_ICR_RTOCF,
 			       port->membase + ofs->icr);
+		ret = IRQ_HANDLED;
+	}
 
 	if ((sr & USART_SR_WUF) && ofs->icr != UNDEF_REG) {
 		/* Clear wake up flag and disable wake up interrupt */
@@ -882,6 +886,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
 		stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_WUFIE);
 		if (irqd_is_wakeup_set(irq_get_irq_data(port->irq)))
 			pm_wakeup_event(tport->tty->dev, 0);
+		ret = IRQ_HANDLED;
 	}
 
 	/*
@@ -896,6 +901,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
 			uart_unlock_and_check_sysrq(port);
 			if (size)
 				tty_flip_buffer_push(tport);
+			ret = IRQ_HANDLED;
 		}
 	}
 
@@ -903,6 +909,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
 		uart_port_lock(port);
 		stm32_usart_transmit_chars(port);
 		uart_port_unlock(port);
+		ret = IRQ_HANDLED;
 	}
 
 	/* Receiver timeout irq for DMA RX */
@@ -912,9 +919,10 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
 		uart_unlock_and_check_sysrq(port);
 		if (size)
 			tty_flip_buffer_push(tport);
+		ret = IRQ_HANDLED;
 	}
 
-	return IRQ_HANDLED;
+	return ret;
 }
 
 static void stm32_usart_set_mctrl(struct uart_port *port, unsigned int mctrl)





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux