From: Xiang Chen <chenxiang66@xxxxxxxxxxxxx> [ Upstream commit 358e919a351f2ea4b412e7dac6b1c23ec10bd4f5 ] We find that some disks use D2H frame instead of SDB frame to return NCQ error. Currently, only the I/O corresponding to the D2H frame is processed in this scenario, which does not meet the processing requirements of the NCQ error scenario. So we set dev_status to HISI_SAS_DEV_NCQ_ERR and abort all I/Os of the disk in this scenario. Co-developed-by: Xingui Yang <yangxingui@xxxxxxxxxx> Signed-off-by: Xingui Yang <yangxingui@xxxxxxxxxx> Signed-off-by: Xiang Chen <chenxiang66@xxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20240402035513.2024241-2-chenxiang66@xxxxxxxxxxxxx Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index b56fbc61a15ae..86112f234740d 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -2244,7 +2244,15 @@ slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task, case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: if ((dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) && (sipc_rx_err_type & RX_FIS_STATUS_ERR_MSK)) { - ts->stat = SAS_PROTO_RESPONSE; + if (task->ata_task.use_ncq) { + struct domain_device *device = task->dev; + struct hisi_sas_device *sas_dev = device->lldd_dev; + + sas_dev->dev_status = HISI_SAS_DEV_NCQ_ERR; + slot->abort = 1; + } else { + ts->stat = SAS_PROTO_RESPONSE; + } } else if (dma_rx_err_type & RX_DATA_LEN_UNDERFLOW_MSK) { ts->residual = trans_tx_fail_type; ts->stat = SAS_DATA_UNDERRUN; -- 2.43.0
