These drivers use 9100-byte receive buffers, thus allocating an skb requires
an O(3) memory allocation. Under heavy memory loads and fragmentation, such
a request can fail. Previous versions of the driver have dropped the packet
and reused the old buffer; however, the new version introduced a bug in that
it released the old buffer before trying to allocate a new one. The previous
method is implemented here.
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Cc: Stable <stable@xxxxxxxxxxxxxxx> [v3.18]
Reported-by: Eric Biggers <ebiggers3@xxxxxxxxx>
Cc: Eric Biggers <ebiggers3@xxxxxxxxx>
---
V2 - Fixes an error in the logic of V1. Realtek is working on a change to
the RX buffer allocation, but that is likely to be too invasive for
a fix to -rc or stable. In the meantime, this will help.
Larry
---
drivers/net/wireless/rtlwifi/pci.c | 32 ++++++++++++++++++++++++--------
1 file changed, 24 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 846a2e6..cf4e2c6 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -666,7 +666,8 @@ tx_status_ok:
}
static int _rtl_pci_init_one_rxdesc(struct ieee80211_hw *hw,
- u8 *entry, int rxring_idx, int desc_idx)
+ struct sk_buff *new_skb, u8 *entry,
+ int rxring_idx, int desc_idx)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
@@ -674,11 +675,15 @@ static int _rtl_pci_init_one_rxdesc(struct ieee80211_hw *hw,
u8 tmp_one = 1;
struct sk_buff *skb;
+ if (likely(new_skb)) {
+ skb = new_skb;
+ goto remap;
+ }
skb = dev_alloc_skb(rtlpci->rxbuffersize);
if (!skb)
return 0;
- rtlpci->rx_ring[rxring_idx].rx_buf[desc_idx] = skb;
+remap:
/* just set skb->cb to mapping addr for pci_unmap_single use */
*((dma_addr_t *)skb->cb) =
pci_map_single(rtlpci->pdev, skb_tail_pointer(skb),
@@ -686,6 +691,7 @@ static int _rtl_pci_init_one_rxdesc(struct ieee80211_hw *hw,
bufferaddress = *((dma_addr_t *)skb->cb);
if (pci_dma_mapping_error(rtlpci->pdev, bufferaddress))
return 0;
+ rtlpci->rx_ring[rxring_idx].rx_buf[desc_idx] = skb;
if (rtlpriv->use_new_trx_flow) {
rtlpriv->cfg->ops->set_desc(hw, (u8 *)entry, false,
HW_DESC_RX_PREPARE,
@@ -781,6 +787,7 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw)
/*rx pkt */
struct sk_buff *skb = rtlpci->rx_ring[rxring_idx].rx_buf[
rtlpci->rx_ring[rxring_idx].idx];
+ struct sk_buff *new_skb;
if (rtlpriv->use_new_trx_flow) {
rx_remained_cnt =
@@ -800,6 +807,13 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw)
return;
}
+ /* get a new skb - if fail, old one will be reused */
+ new_skb = dev_alloc_skb(rtlpci->rxbuffersize);
+ if (unlikely(!new_skb)) {
+ pr_err("Allocation of new skb failed in %s\n",
+ __func__);
+ goto no_new;
+ }
/* Reaching this point means: data is filled already
* AAAAAAttention !!!
* We can NOT access 'skb' before 'pci_unmap_single'
@@ -911,14 +925,16 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw)
schedule_work(&rtlpriv->works.lps_change_work);
}
end:
+ skb = new_skb;
+no_new:
if (rtlpriv->use_new_trx_flow) {
- _rtl_pci_init_one_rxdesc(hw, (u8 *)buffer_desc,
+ _rtl_pci_init_one_rxdesc(hw, skb, (u8 *)buffer_desc,
rxring_idx,
- rtlpci->rx_ring[rxring_idx].idx);
+ rtlpci->rx_ring[rxring_idx].idx);
} else {
- _rtl_pci_init_one_rxdesc(hw, (u8 *)pdesc, rxring_idx,
+ _rtl_pci_init_one_rxdesc(hw, skb, (u8 *)pdesc,
+ rxring_idx,
rtlpci->rx_ring[rxring_idx].idx);
-
if (rtlpci->rx_ring[rxring_idx].idx ==
rtlpci->rxringcount - 1)
rtlpriv->cfg->ops->set_desc(hw, (u8 *)pdesc,
@@ -1307,7 +1323,7 @@ static int _rtl_pci_init_rx_ring(struct ieee80211_hw *hw, int rxring_idx)
rtlpci->rx_ring[rxring_idx].idx = 0;
for (i = 0; i < rtlpci->rxringcount; i++) {
entry = &rtlpci->rx_ring[rxring_idx].buffer_desc[i];
- if (!_rtl_pci_init_one_rxdesc(hw, (u8 *)entry,
+ if (!_rtl_pci_init_one_rxdesc(hw, NULL, (u8 *)entry,
rxring_idx, i))
return -ENOMEM;
}
@@ -1332,7 +1348,7 @@ static int _rtl_pci_init_rx_ring(struct ieee80211_hw *hw, int rxring_idx)
for (i = 0; i < rtlpci->rxringcount; i++) {
entry = &rtlpci->rx_ring[rxring_idx].desc[i];
- if (!_rtl_pci_init_one_rxdesc(hw, (u8 *)entry,
+ if (!_rtl_pci_init_one_rxdesc(hw, NULL, (u8 *)entry,
rxring_idx, i))
return -ENOMEM;
}
--
2.1.2
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html