On Fri, 12 Apr 2024 19:03:25 +0000, Volodymyr Babchuk wrote:
> There are two issues with SDHC2 configuration for SA8155P-ADP,
> which prevent use of SDHC2 and causes issues with ethernet:
>
> - Card Detect pin for SHDC2 on SA8155P-ADP is connected to gpio4 of
> PMM8155AU_1, not to SoC itself. SoC's gpio4 is used for DWMAC
> TX. If sdhc driver probes after dwmac driver, it reconfigures
> gpio4 and this breaks Ethernet MAC.
>
> [...]
Applied, thanks!
[2/2] arm64: dts: qcom: sa8155p-adp: lower min volt for L13C regulator
commit: 5927bc586a3f2a81abcf8134fda5f7639abeeefd
Best regards,
--
Bjorn Andersson <andersson@xxxxxxxxxx>
