6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Frank Li <Frank.Li@xxxxxxx>
commit 808e7716edcdb39d3498b9f567ef6017858b49aa upstream.
usb2_lpcg: clock-controller@5b270000 {
... Col1 Col2
clocks = <&conn_ahb_clk>, <&conn_ipg_clk>; // 0 6
clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>; // 0 7
...
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
usbotg1: usb@5b0d0000 {
...
clocks = <&usb2_lpcg 0>;
^^
Should be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
};
usbphy1: usbphy@5b100000 {
clocks = <&usb2_lpcg 1>;
^^
SHould be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
};
Arg0 is divided by 4 in lpcg driver. So lpcg will do dummy enable. Fix it
by use correct clock indices.
Cc: stable@xxxxxxxxxxxxxxx
Fixes: 8065fc937f0f ("arm64: dts: imx8dxl: add usb1 and usb2 support")
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -41,7 +41,7 @@ conn_subsys: bus@5b000000 {
interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc1 0>;
- clocks = <&usb2_lpcg 0>;
+ clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
ahb-burst-config = <0x0>;
tx-burst-size-dword = <0x10>;
rx-burst-size-dword = <0x10>;
@@ -58,7 +58,7 @@ conn_subsys: bus@5b000000 {
usbphy1: usbphy@5b100000 {
compatible = "fsl,imx7ulp-usbphy";
reg = <0x5b100000 0x1000>;
- clocks = <&usb2_lpcg 1>;
+ clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
power-domains = <&pd IMX_SC_R_USB_0_PHY>;
status = "disabled";
};
