5.10-stable review patch. If anyone has any objections, please let me know. ------------------ From: Christian A. Ehrhardt <lk@xxxxxxx> commit 3de4f996a0b5412aa451729008130a488f71563e upstream. Check the UCSI_CCI_RESET_COMPLETE complete flag before starting another reset. Use a UCSI_SET_NOTIFICATION_ENABLE command to clear the flag if it is set. Signed-off-by: Christian A. Ehrhardt <lk@xxxxxxx> Cc: stable <stable@xxxxxxxxxx> Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx> Tested-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> # on SM8550-QRD Link: https://lore.kernel.org/r/20240320073927.1641788-6-lk@xxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/typec/ucsi/ucsi.c | 36 +++++++++++++++++++++++++++++++++++- 1 file changed, 35 insertions(+), 1 deletion(-) --- a/drivers/usb/typec/ucsi/ucsi.c +++ b/drivers/usb/typec/ucsi/ucsi.c @@ -852,13 +852,47 @@ static int ucsi_reset_connector(struct u static int ucsi_reset_ppm(struct ucsi *ucsi) { - u64 command = UCSI_PPM_RESET; + u64 command; unsigned long tmo; u32 cci; int ret; mutex_lock(&ucsi->ppm_lock); + ret = ucsi->ops->read(ucsi, UCSI_CCI, &cci, sizeof(cci)); + if (ret < 0) + goto out; + + /* + * If UCSI_CCI_RESET_COMPLETE is already set we must clear + * the flag before we start another reset. Send a + * UCSI_SET_NOTIFICATION_ENABLE command to achieve this. + * Ignore a timeout and try the reset anyway if this fails. + */ + if (cci & UCSI_CCI_RESET_COMPLETE) { + command = UCSI_SET_NOTIFICATION_ENABLE; + ret = ucsi->ops->async_write(ucsi, UCSI_CONTROL, &command, + sizeof(command)); + if (ret < 0) + goto out; + + tmo = jiffies + msecs_to_jiffies(UCSI_TIMEOUT_MS); + do { + ret = ucsi->ops->read(ucsi, UCSI_CCI, + &cci, sizeof(cci)); + if (ret < 0) + goto out; + if (cci & UCSI_CCI_COMMAND_COMPLETE) + break; + if (time_is_before_jiffies(tmo)) + break; + msleep(20); + } while (1); + + WARN_ON(cci & UCSI_CCI_RESET_COMPLETE); + } + + command = UCSI_PPM_RESET; ret = ucsi->ops->async_write(ucsi, UCSI_CONTROL, &command, sizeof(command)); if (ret < 0)
