From: Zhongwei <zhongwei.zhang@xxxxxxx>
[Why]
OLED panels show no display for large vtotal timings.
[How]
Check if ss is enabled and read from lut for spread spectrum percentage.
Adjust dprefclk as required. DP_DTO adjustment is for edp only.
Cc: stable@xxxxxxxxxxxxxxx
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@xxxxxxx>
Acked-by: Hamza Mahfooz <hamza.mahfooz@xxxxxxx>
Signed-off-by: Zhongwei <zhongwei.zhang@xxxxxxx>
---
.../display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c | 50 +++++++++++++++++++
.../drm/amd/display/dc/dce/dce_clock_source.c | 8 +--
2 files changed, 54 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c
index 8efde1cfb49a..6c9b4e6491a5 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c
@@ -73,6 +73,12 @@
#define CLK1_CLK2_BYPASS_CNTL__CLK2_BYPASS_SEL_MASK 0x00000007L
#define CLK1_CLK2_BYPASS_CNTL__CLK2_BYPASS_DIV_MASK 0x000F0000L
+#define regCLK5_0_CLK5_spll_field_8 0x464b
+#define regCLK5_0_CLK5_spll_field_8_BASE_IDX 0
+
+#define CLK5_0_CLK5_spll_field_8__spll_ssc_en__SHIFT 0xd
+#define CLK5_0_CLK5_spll_field_8__spll_ssc_en_MASK 0x00002000L
+
#define SMU_VER_THRESHOLD 0x5D4A00 //93.74.0
#define REG(reg_name) \
@@ -412,6 +418,17 @@ static void dcn35_dump_clk_registers(struct clk_state_registers_and_bypass *regs
{
}
+static bool dcn35_is_spll_ssc_enabled(struct clk_mgr *clk_mgr_base)
+{
+ struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
+ struct dc_context *ctx = clk_mgr->base.ctx;
+ uint32_t ssc_enable;
+
+ REG_GET(CLK5_0_CLK5_spll_field_8, spll_ssc_en, &ssc_enable);
+
+ return ssc_enable == 1;
+}
+
static void init_clk_states(struct clk_mgr *clk_mgr)
{
struct clk_mgr_internal *clk_mgr_int = TO_CLK_MGR_INTERNAL(clk_mgr);
@@ -429,7 +446,16 @@ static void init_clk_states(struct clk_mgr *clk_mgr)
void dcn35_init_clocks(struct clk_mgr *clk_mgr)
{
+ struct clk_mgr_internal *clk_mgr_int = TO_CLK_MGR_INTERNAL(clk_mgr);
init_clk_states(clk_mgr);
+
+ // to adjust dp_dto reference clock if ssc is enable otherwise to apply dprefclk
+ if (dcn35_is_spll_ssc_enabled(clk_mgr))
+ clk_mgr->dp_dto_source_clock_in_khz =
+ dce_adjust_dp_ref_freq_for_ss(clk_mgr_int, clk_mgr->dprefclk_khz);
+ else
+ clk_mgr->dp_dto_source_clock_in_khz = clk_mgr->dprefclk_khz;
+
}
static struct clk_bw_params dcn35_bw_params = {
.vram_type = Ddr4MemType,
@@ -518,6 +544,28 @@ static DpmClocks_t_dcn35 dummy_clocks;
static struct dcn35_watermarks dummy_wms = { 0 };
+static struct dcn35_ss_info_table ss_info_table = {
+ .ss_divider = 1000,
+ .ss_percentage = {0, 0, 375, 375, 375}
+};
+
+static void dcn35_read_ss_info_from_lut(struct clk_mgr_internal *clk_mgr)
+{
+ struct dc_context *ctx = clk_mgr->base.ctx;
+ uint32_t clock_source;
+
+ REG_GET(CLK1_CLK2_BYPASS_CNTL, CLK2_BYPASS_SEL, &clock_source);
+ // If it's DFS mode, clock_source is 0.
+ if (dcn35_is_spll_ssc_enabled(&clk_mgr->base) && (clock_source < ARRAY_SIZE(ss_info_table.ss_percentage))) {
+ clk_mgr->dprefclk_ss_percentage = ss_info_table.ss_percentage[clock_source];
+
+ if (clk_mgr->dprefclk_ss_percentage != 0) {
+ clk_mgr->ss_on_dprefclk = true;
+ clk_mgr->dprefclk_ss_divider = ss_info_table.ss_divider;
+ }
+ }
+}
+
static void dcn35_build_watermark_ranges(struct clk_bw_params *bw_params, struct dcn35_watermarks *table)
{
int i, num_valid_sets;
@@ -1024,6 +1072,8 @@ void dcn35_clk_mgr_construct(
dce_clock_read_ss_info(&clk_mgr->base);
/*when clk src is from FCH, it could have ss, same clock src as DPREF clk*/
+ dcn35_read_ss_info_from_lut(&clk_mgr->base);
+
clk_mgr->base.base.bw_params = &dcn35_bw_params;
if (clk_mgr->base.base.ctx->dc->debug.pstate_enabled) {
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c b/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c
index 970644b695cd..b5e0289d2fe8 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c
@@ -976,7 +976,10 @@ static bool dcn31_program_pix_clk(
struct bp_pixel_clock_parameters bp_pc_params = {0};
enum transmitter_color_depth bp_pc_colour_depth = TRANSMITTER_COLOR_DEPTH_24;
- if (clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz != 0)
+ // Apply ssed(spread spectrum) dpref clock for edp only.
+ if (clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz != 0
+ && pix_clk_params->signal_type == SIGNAL_TYPE_EDP
+ && encoding == DP_8b_10b_ENCODING)
dp_dto_ref_khz = clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz;
// For these signal types Driver to program DP_DTO without calling VBIOS Command table
if (dc_is_dp_signal(pix_clk_params->signal_type) || dc_is_virtual_signal(pix_clk_params->signal_type)) {
@@ -1093,9 +1096,6 @@ static bool get_pixel_clk_frequency_100hz(
unsigned int modulo_hz = 0;
unsigned int dp_dto_ref_khz = clock_source->ctx->dc->clk_mgr->dprefclk_khz;
- if (clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz != 0)
- dp_dto_ref_khz = clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz;
-
if (clock_source->id == CLOCK_SOURCE_ID_DP_DTO) {
clock_hz = REG_READ(PHASE[inst]);
--
2.44.0
