From: Vinicius Peixoto <nukelet64@xxxxxxxxx>
[ Upstream commit 48201a3b3f398be6a01f78a14b18bd5d31c47458 ]
The ATS2851 controller erroneously reports support for the "Read
Encryption Key Length" HCI command. This makes it unable to connect
to any devices, since this command is issued by the kernel during the
connection process in response to an "Encryption Change" HCI event.
Add a new quirk (HCI_QUIRK_BROKEN_ENC_KEY_SIZE) to hint that the command
is unsupported, preventing it from interrupting the connection process.
This is the error log from btmon before this patch:
> HCI Event: Encryption Change (0x08) plen 4
Status: Success (0x00)
Handle: 2048 Address: ...
Encryption: Enabled with E0 (0x01)
< HCI Command: Read Encryption Key Size (0x05|0x0008) plen 2
Handle: 2048 Address: ...
> HCI Event: Command Status (0x0f) plen 4
Read Encryption Key Size (0x05|0x0008) ncmd 1
Status: Unknown HCI Command (0x01)
Signed-off-by: Vinicius Peixoto <nukelet64@xxxxxxxxx>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/bluetooth/btusb.c | 1 +
include/net/bluetooth/hci.h | 8 ++++++++
net/bluetooth/hci_event.c | 3 ++-
3 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index d31edad7a0560..0c0e06ea92863 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -4481,6 +4481,7 @@ static int btusb_probe(struct usb_interface *intf,
set_bit(HCI_QUIRK_BROKEN_READ_TRANSMIT_POWER, &hdev->quirks);
set_bit(HCI_QUIRK_BROKEN_SET_RPA_TIMEOUT, &hdev->quirks);
set_bit(HCI_QUIRK_BROKEN_EXT_SCAN, &hdev->quirks);
+ set_bit(HCI_QUIRK_BROKEN_READ_ENC_KEY_SIZE, &hdev->quirks);
}
if (!reset)
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index bdee5d649cc61..8c36e094ec99f 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -330,6 +330,14 @@ enum {
* during the hdev->setup vendor callback.
*/
HCI_QUIRK_BROKEN_LE_CODED,
+
+ /*
+ * When this quirk is set, the HCI_OP_READ_ENC_KEY_SIZE command is
+ * skipped during an HCI_EV_ENCRYPT_CHANGE event. This is required
+ * for Actions Semiconductor ATS2851 based controllers, which erroneously
+ * claim to support it.
+ */
+ HCI_QUIRK_BROKEN_READ_ENC_KEY_SIZE,
};
/* HCI device flags */
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 2a5f5a7d2412b..8652cdee14b00 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -3660,7 +3660,8 @@ static void hci_encrypt_change_evt(struct hci_dev *hdev, void *data,
* controller really supports it. If it doesn't, assume
* the default size (16).
*/
- if (!(hdev->commands[20] & 0x10)) {
+ if (!(hdev->commands[20] & 0x10) ||
+ test_bit(HCI_QUIRK_BROKEN_READ_ENC_KEY_SIZE, &hdev->quirks)) {
conn->enc_key_size = HCI_LINK_KEY_SIZE;
goto notify;
}
--
2.43.0
