FAILED: Patch "drm/amd/display: adjust few initialization order in dm" failed to apply to 5.15-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.

Thanks,
Sasha

------------------ original commit in Linus's tree ------------------

>From c9aef4f6c6d7cdc92a64ffe761c6921ec85157ae Mon Sep 17 00:00:00 2001
From: Wayne Lin <wayne.lin@xxxxxxx>
Date: Fri, 2 Feb 2024 17:34:11 +0800
Subject: [PATCH] drm/amd/display: adjust few initialization order in dm

[Why]
Observe error message "Can't retrieve aconnector in hpd_rx_irq_offload_work"
when boot up with a mst tbt4 dock connected. After analyzing, there are few
parts needed to be adjusted:

1. hpd_rx_offload_wq[].aconnector is not initialzed before the dmub outbox
hpd_irq handler get registered which causes the error message.

2. registeration of hpd and hpd_rx_irq event for usb4 dp tunneling is not
aligned with legacy interface sequence

[How]
Put DMUB_NOTIFICATION_HPD and DMUB_NOTIFICATION_HPD_IRQ handler
registration into register_hpd_handlers() to align other interfaces and
get hpd_rx_offload_wq[].aconnector initialized earlier than that.

Leave DMUB_NOTIFICATION_AUX_REPLY registered as it was since we need that
while calling dc_link_detect(). USB4 connection status will be proactively
detected by dc_link_detect_connection_type() in amdgpu_dm_initialize_drm_device()

Cc: Stable <stable@xxxxxxxxxxxxxxx>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@xxxxxxx>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@xxxxxxx>
Tested-by: Daniel Wheeler <daniel.wheeler@xxxxxxx>
Signed-off-by: Wayne Lin <wayne.lin@xxxxxxx>
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
---
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 37 +++++++++----------
 1 file changed, 18 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 985137b51372d..8b13cb334b366 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1844,21 +1844,12 @@ static int amdgpu_dm_init(struct amdgpu_device *adev)
 			DRM_ERROR("amdgpu: fail to register dmub aux callback");
 			goto error;
 		}
-		if (!register_dmub_notify_callback(adev, DMUB_NOTIFICATION_HPD, dmub_hpd_callback, true)) {
-			DRM_ERROR("amdgpu: fail to register dmub hpd callback");
-			goto error;
-		}
-		if (!register_dmub_notify_callback(adev, DMUB_NOTIFICATION_HPD_IRQ, dmub_hpd_callback, true)) {
-			DRM_ERROR("amdgpu: fail to register dmub hpd callback");
-			goto error;
-		}
-	}
-
-	/* Enable outbox notification only after IRQ handlers are registered and DMUB is alive.
-	 * It is expected that DMUB will resend any pending notifications at this point, for
-	 * example HPD from DPIA.
-	 */
-	if (dc_is_dmub_outbox_supported(adev->dm.dc)) {
+		/* Enable outbox notification only after IRQ handlers are registered and DMUB is alive.
+		 * It is expected that DMUB will resend any pending notifications at this point. Note
+		 * that hpd and hpd_irq handler registration are deferred to register_hpd_handlers() to
+		 * align legacy interface initialization sequence. Connection status will be proactivly
+		 * detected once in the amdgpu_dm_initialize_drm_device.
+		 */
 		dc_enable_dmub_outbox(adev->dm.dc);
 
 		/* DPIA trace goes to dmesg logs only if outbox is enabled */
@@ -3547,6 +3538,14 @@ static void register_hpd_handlers(struct amdgpu_device *adev)
 	int_params.requested_polarity = INTERRUPT_POLARITY_DEFAULT;
 	int_params.current_polarity = INTERRUPT_POLARITY_DEFAULT;
 
+	if (dc_is_dmub_outbox_supported(adev->dm.dc)) {
+		if (!register_dmub_notify_callback(adev, DMUB_NOTIFICATION_HPD, dmub_hpd_callback, true))
+			DRM_ERROR("amdgpu: fail to register dmub hpd callback");
+
+		if (!register_dmub_notify_callback(adev, DMUB_NOTIFICATION_HPD_IRQ, dmub_hpd_callback, true))
+			DRM_ERROR("amdgpu: fail to register dmub hpd callback");
+	}
+
 	list_for_each_entry(connector,
 			&dev->mode_config.connector_list, head)	{
 
@@ -3575,10 +3574,6 @@ static void register_hpd_handlers(struct amdgpu_device *adev)
 					handle_hpd_rx_irq,
 					(void *) aconnector);
 		}
-
-		if (adev->dm.hpd_rx_offload_wq)
-			adev->dm.hpd_rx_offload_wq[connector->index].aconnector =
-				aconnector;
 	}
 }
 
@@ -4590,6 +4585,10 @@ static int amdgpu_dm_initialize_drm_device(struct amdgpu_device *adev)
 			goto fail;
 		}
 
+		if (dm->hpd_rx_offload_wq)
+			dm->hpd_rx_offload_wq[aconnector->base.index].aconnector =
+				aconnector;
+
 		if (!dc_link_detect_connection_type(link, &new_connection_type))
 			DRM_ERROR("KMS: Failed to detect connector\n");
 
-- 
2.43.0








[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux