After the commit d2689b6a86b9 ("net: usb: ax88179_178a: avoid two
consecutive device resets"), reset is not executed from bind operation and
mac address is not read from the device registers or the devicetree at that
moment. Since the check to configure if the assigned mac address is random
or not for the interface, happens after the bind operation from
usbnet_probe, the interface keeps configured as random address, although the
address is correctly read and set during open operation (the only reset
now).
In order to keep only one reset for the device and to avoid the interface
always configured as random address, after reset, configure correctly the
suitable field from the driver, if the mac address is read successfully from
the device registers or the devicetree.
In addition, if mac address can not be read from the driver, a random
address is configured again, so it is not necessary to call
eth_hw_addr_random from here. Indeed, in this situtatuon, when reset was
also executed from bind, this was invalidating the check to configure if the
assigned mac address for the interface was random or not.
cc: stable@xxxxxxxxxxxxxxx # 6.6+
Fixes: d2689b6a86b9 ("net: usb: ax88179_178a: avoid two consecutive device resets")
Reported-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@xxxxxxxxxx>
---
drivers/net/usb/ax88179_178a.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index 88e084534853..d2324cc02461 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -1273,10 +1273,9 @@ static void ax88179_get_mac_addr(struct usbnet *dev)
if (is_valid_ether_addr(mac)) {
eth_hw_addr_set(dev->net, mac);
- } else {
+ dev->net->addr_assign_type = NET_ADDR_PERM;
+ } else
netdev_info(dev->net, "invalid MAC address, using random\n");
- eth_hw_addr_random(dev->net);
- }
ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN, ETH_ALEN,
dev->net->dev_addr);
--
2.44.0
