From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
[ Upstream commit e15ab05a6b3ed42f2f43f8bd1a1abdbde64afecd ]
The MT8192 does not support configuring pin slew rate. This is evident
from both the datasheet, and the fact that the driver points the slew
rate register range at the GPIO direction register range.
Drop the bogus setting.
Fixes: d32f38f2a8fc ("pinctrl: mediatek: Add pinctrl driver for mt8192")
Signed-off-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20240131071910.3950450-2-wenst@xxxxxxxxxxxx
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/pinctrl/mediatek/pinctrl-mt8192.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8192.c b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
index dee1b3aefd36e..bf5788d6810ff 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt8192.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
@@ -1379,7 +1379,6 @@ static const struct mtk_pin_reg_calc mt8192_reg_cals[PINCTRL_PIN_REG_MAX] = {
[PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt8192_pin_dir_range),
[PINCTRL_PIN_REG_DI] = MTK_RANGE(mt8192_pin_di_range),
[PINCTRL_PIN_REG_DO] = MTK_RANGE(mt8192_pin_do_range),
- [PINCTRL_PIN_REG_SR] = MTK_RANGE(mt8192_pin_dir_range),
[PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt8192_pin_smt_range),
[PINCTRL_PIN_REG_IES] = MTK_RANGE(mt8192_pin_ies_range),
[PINCTRL_PIN_REG_PU] = MTK_RANGE(mt8192_pin_pu_range),
--
2.43.0
