[PATCH 5.4 051/183] arm64: dts: qcom: msm8996: Move regulator consumers to db820c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

[ Upstream commit 80884431430995254257848d1a05266a2b791c58 ]

Supplies for the various components in the SoC depends on board layout,
so move the supply definitions to db820c.dtsi instead of carrying them
in the platform dtsi.

Acked-by: Vinod Koul <vkoul@xxxxxxxxxx>
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Stable-dep-of: 68c4c20848d7 ("arm64: dts: qcom: msm8996: Define UFS UniPro clock limits")
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 44 ++++++++++++++++++++
 arch/arm64/boot/dts/qcom/msm8996.dtsi        | 44 --------------------
 2 files changed, 44 insertions(+), 44 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 44ec3eb1c8e85..21e029afb27bb 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -142,6 +142,10 @@ &blsp2_spi5 {
 	status = "okay";
 };
 
+&camss {
+	vdda-supply = <&pm8994_l2>;
+};
+
 &sdhc2 {
 	/* External SD card */
 	pinctrl-names = "default", "sleep";
@@ -155,10 +159,28 @@ &sdhc2 {
 
 &ufsphy {
 	status = "okay";
+
+	vdda-phy-supply = <&pm8994_l28>;
+	vdda-pll-supply = <&pm8994_l12>;
+
+	vdda-phy-max-microamp = <18380>;
+	vdda-pll-max-microamp = <9440>;
+
+	vddp-ref-clk-supply = <&pm8994_l25>;
+	vddp-ref-clk-max-microamp = <100>;
+	vddp-ref-clk-always-on;
 };
 
 &ufshc {
 	status = "okay";
+
+	vcc-supply = <&pm8994_l20>;
+	vccq-supply = <&pm8994_l25>;
+	vccq2-supply = <&pm8994_s4>;
+
+	vcc-max-microamp = <600000>;
+	vccq-max-microamp = <450000>;
+	vccq2-max-microamp = <450000>;
 };
 
 &msmgpio {
@@ -369,18 +391,31 @@ &pmi8994_gpios {
 
 &pcie_phy {
 	status = "okay";
+
+	vdda-phy-supply = <&pm8994_l28>;
+	vdda-pll-supply = <&pm8994_l12>;
 };
 
 &usb3phy {
 	status = "okay";
+
+	vdda-phy-supply = <&pm8994_l28>;
+	vdda-pll-supply = <&pm8994_l12>;
+
 };
 
 &hsusb_phy1 {
 	status = "okay";
+
+	vdda-pll-supply = <&pm8994_l12>;
+	vdda-phy-dpdm-supply = <&pm8994_l24>;
 };
 
 &hsusb_phy2 {
 	status = "okay";
+
+	vdda-pll-supply = <&pm8994_l12>;
+	vdda-phy-dpdm-supply = <&pm8994_l24>;
 };
 
 &usb3 {
@@ -408,22 +443,31 @@ &pcie0 {
 	status = "okay";
 	perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
 	vddpe-3v3-supply = <&wlan_en>;
+	vdda-supply = <&pm8994_l28>;
 };
 
 &pcie1 {
 	status = "okay";
 	perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
+	vdda-supply = <&pm8994_l28>;
 };
 
 &pcie2 {
 	status = "okay";
 	perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
+	vdda-supply = <&pm8994_l28>;
 };
 
 &wcd9335 {
 	clock-names = "mclk", "slimbus";
 	clocks = <&div1_mclk>,
 		 <&rpmcc RPM_SMD_BB_CLK1>;
+
+	vdd-buck-supply = <&pm8994_s4>;
+	vdd-buck-sido-supply = <&pm8994_s4>;
+	vdd-tx-supply = <&pm8994_s4>;
+	vdd-rx-supply = <&pm8994_s4>;
+	vdd-io-supply = <&pm8994_s4>;
 };
 
 &mdss {
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index bbdb0fcd818e9..bcadbdf2690e3 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1343,16 +1343,6 @@ ufsphy: phy@627000 {
 			reg-names = "phy_mem";
 			#phy-cells = <0>;
 
-			vdda-phy-supply = <&pm8994_l28>;
-			vdda-pll-supply = <&pm8994_l12>;
-
-			vdda-phy-max-microamp = <18380>;
-			vdda-pll-max-microamp = <9440>;
-
-			vddp-ref-clk-supply = <&pm8994_l25>;
-			vddp-ref-clk-max-microamp = <100>;
-			vddp-ref-clk-always-on;
-
 			clock-names = "ref_clk_src", "ref_clk";
 			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
 				 <&gcc GCC_UFS_CLKREF_CLK>;
@@ -1368,14 +1358,6 @@ ufshc: ufshc@624000 {
 			phys = <&ufsphy>;
 			phy-names = "ufsphy";
 
-			vcc-supply = <&pm8994_l20>;
-			vccq-supply = <&pm8994_l25>;
-			vccq2-supply = <&pm8994_s4>;
-
-			vcc-max-microamp = <600000>;
-			vccq-max-microamp = <450000>;
-			vccq2-max-microamp = <450000>;
-
 			power-domains = <&gcc UFS_GDSC>;
 
 			clock-names =
@@ -1477,9 +1459,6 @@ pcie_phy: phy@34000 {
 				<&gcc GCC_PCIE_CLKREF_CLK>;
 			clock-names = "aux", "cfg_ahb", "ref";
 
-			vdda-phy-supply = <&pm8994_l28>;
-			vdda-pll-supply = <&pm8994_l12>;
-
 			resets = <&gcc GCC_PCIE_PHY_BCR>,
 				<&gcc GCC_PCIE_PHY_COM_BCR>,
 				<&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
@@ -1539,9 +1518,6 @@ usb3phy: phy@7410000 {
 				<&gcc GCC_USB3_CLKREF_CLK>;
 			clock-names = "aux", "cfg_ahb", "ref";
 
-			vdda-phy-supply = <&pm8994_l28>;
-			vdda-pll-supply = <&pm8994_l12>;
-
 			resets = <&gcc GCC_USB3_PHY_BCR>,
 				<&gcc GCC_USB3PHY_PHY_BCR>;
 			reset-names = "phy", "common";
@@ -1568,9 +1544,6 @@ hsusb_phy1: phy@7411000 {
 				<&gcc GCC_RX1_USB2_CLKREF_CLK>;
 			clock-names = "cfg_ahb", "ref";
 
-			vdda-pll-supply = <&pm8994_l12>;
-			vdda-phy-dpdm-supply = <&pm8994_l24>;
-
 			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
 			nvmem-cells = <&qusb2p_hstx_trim>;
 			status = "disabled";
@@ -1585,9 +1558,6 @@ hsusb_phy2: phy@7412000 {
 				<&gcc GCC_RX2_USB2_CLKREF_CLK>;
 			clock-names = "cfg_ahb", "ref";
 
-			vdda-pll-supply = <&pm8994_l12>;
-			vdda-phy-dpdm-supply = <&pm8994_l24>;
-
 			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
 			nvmem-cells = <&qusb2s_hstx_trim>;
 			status = "disabled";
@@ -1795,7 +1765,6 @@ camss: camss@a00000 {
 				"vfe1_stream",
 				"vfe_ahb",
 				"vfe_axi";
-			vdda-supply = <&pm8994_l2>;
 			iommus = <&vfe_smmu 0>,
 				 <&vfe_smmu 1>,
 				 <&vfe_smmu 2>,
@@ -1907,9 +1876,6 @@ pcie0: pcie@600000 {
 				pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>;
 				pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>;
 
-
-				vdda-supply = <&pm8994_l28>;
-
 				linux,pci-domain = <0>;
 
 				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
@@ -1962,8 +1928,6 @@ pcie1: pcie@608000 {
 				pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>;
 				pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>;
 
-
-				vdda-supply = <&pm8994_l28>;
 				linux,pci-domain = <1>;
 
 				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
@@ -2015,8 +1979,6 @@ pcie2: pcie@610000 {
 				pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>;
 				pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >;
 
-				vdda-supply = <&pm8994_l28>;
-
 				linux,pci-domain = <2>;
 				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
 					<&gcc GCC_PCIE_2_AUX_CLK>,
@@ -2081,12 +2043,6 @@ wcd9335: codec@1{
 
 					slim-ifc-dev  = <&tasha_ifd>;
 
-					vdd-buck-supply = <&pm8994_s4>;
-					vdd-buck-sido-supply = <&pm8994_s4>;
-					vdd-tx-supply = <&pm8994_s4>;
-					vdd-rx-supply = <&pm8994_s4>;
-					vdd-io-supply = <&pm8994_s4>;
-
 					#sound-dai-cells = <1>;
 				};
 			};
-- 
2.43.0





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux