From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> [ Upstream commit f98643d8daf3443e3b414a82d0cb3d745f8c8bbc ] The binding doesn't define interrupts and adding such a definition was refused because it's unclear how they should ever be used and the relevant registers are outside the PWM range. So drop them fixing several dtbs_check warnings like: arch/arm/boot/dts/rockchip/rv1108-elgin-r1.dtb: pwm@10280030: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/pwm/pwm-rockchip.yaml# Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20240129113205.2453029-2-u.kleine-koenig@xxxxxxxxxxxxxx Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm/boot/dts/rockchip/rv1108.dtsi | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/arm/boot/dts/rockchip/rv1108.dtsi b/arch/arm/boot/dts/rockchip/rv1108.dtsi index abf3006f0a842..f3291f3bbc6fd 100644 --- a/arch/arm/boot/dts/rockchip/rv1108.dtsi +++ b/arch/arm/boot/dts/rockchip/rv1108.dtsi @@ -196,7 +196,6 @@ spi: spi@10270000 { pwm4: pwm@10280000 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x10280000 0x10>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -208,7 +207,6 @@ pwm4: pwm@10280000 { pwm5: pwm@10280010 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x10280010 0x10>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -220,7 +218,6 @@ pwm5: pwm@10280010 { pwm6: pwm@10280020 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x10280020 0x10>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -232,7 +229,6 @@ pwm6: pwm@10280020 { pwm7: pwm@10280030 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x10280030 0x10>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -386,7 +382,6 @@ i2c0: i2c@20000000 { pwm0: pwm@20040000 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x20040000 0x10>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -398,7 +393,6 @@ pwm0: pwm@20040000 { pwm1: pwm@20040010 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x20040010 0x10>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -410,7 +404,6 @@ pwm1: pwm@20040010 { pwm2: pwm@20040020 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x20040020 0x10>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -422,7 +415,6 @@ pwm2: pwm@20040020 { pwm3: pwm@20040030 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x20040030 0x10>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; -- 2.43.0
