From: Tejun Heo <tj@xxxxxxxxxx>
[ Upstream commit 5797b1c18919cd9c289ded7954383e499f729ce0 ]
A pool_workqueue (pwq) represents the connection between a workqueue and a
worker_pool. One of the roles that a pwq plays is enforcement of the
max_active concurrency limit. Before 636b927eba5b ("workqueue: Make unbound
workqueues to use per-cpu pool_workqueues"), there was one pwq per each CPU
for per-cpu workqueues and per each NUMA node for unbound workqueues, which
was a natural result of per-cpu workqueues being served by per-cpu pools and
unbound by per-NUMA pools.
In terms of max_active enforcement, this was, while not perfect, workable.
For per-cpu workqueues, it was fine. For unbound, it wasn't great in that
NUMA machines would get max_active that's multiplied by the number of nodes
but didn't cause huge problems because NUMA machines are relatively rare and
the node count is usually pretty low.
However, cache layouts are more complex now and sharing a worker pool across
a whole node didn't really work well for unbound workqueues. Thus, a series
of commits culminating on 8639ecebc9b1 ("workqueue: Make unbound workqueues
to use per-cpu pool_workqueues") implemented more flexible affinity
mechanism for unbound workqueues which enables using e.g. last-level-cache
aligned pools. In the process, 636b927eba5b ("workqueue: Make unbound
workqueues to use per-cpu pool_workqueues") made unbound workqueues use
per-cpu pwqs like per-cpu workqueues.
While the change was necessary to enable more flexible affinity scopes, this
came with the side effect of blowing up the effective max_active for unbound
workqueues. Before, the effective max_active for unbound workqueues was
multiplied by the number of nodes. After, by the number of CPUs.
636b927eba5b ("workqueue: Make unbound workqueues to use per-cpu
pool_workqueues") claims that this should generally be okay. It is okay for
users which self-regulates concurrency level which are the vast majority;
however, there are enough use cases which actually depend on max_active to
prevent the level of concurrency from going bonkers including several IO
handling workqueues that can issue a work item for each in-flight IO. With
targeted benchmarks, the misbehavior can easily be exposed as reported in
http://lkml.kernel.org/r/dbu6wiwu3sdhmhikb2w6lns7b27gbobfavhjj57kwi2quafgwl@htjcc5oikcr3.
Unfortunately, there is no way to express what these use cases need using
per-cpu max_active. A CPU may issue most of in-flight IOs, so we don't want
to set max_active too low but as soon as we increase max_active a bit, we
can end up with unreasonable number of in-flight work items when many CPUs
issue IOs at the same time. ie. The acceptable lowest max_active is higher
than the acceptable highest max_active.
Ideally, max_active for an unbound workqueue should be system-wide so that
the users can regulate the total level of concurrency regardless of node and
cache layout. The reasons workqueue hasn't implemented that yet are:
- One max_active enforcement decouples from pool boundaires, chaining
execution after a work item finishes requires inter-pool operations which
would require lock dancing, which is nasty.
- Sharing a single nr_active count across the whole system can be pretty
expensive on NUMA machines.
- Per-pwq enforcement had been more or less okay while we were using
per-node pools.
It looks like we no longer can avoid decoupling max_active enforcement from
pool boundaries. This patch implements system-wide nr_active mechanism with
the following design characteristics:
- To avoid sharing a single counter across multiple nodes, the configured
max_active is split across nodes according to the proportion of each
workqueue's online effective CPUs per node. e.g. A node with twice more
online effective CPUs will get twice higher portion of max_active.
- Workqueue used to be able to process a chain of interdependent work items
which is as long as max_active. We can't do this anymore as max_active is
distributed across the nodes. Instead, a new parameter min_active is
introduced which determines the minimum level of concurrency within a node
regardless of how max_active distribution comes out to be.
It is set to the smaller of max_active and WQ_DFL_MIN_ACTIVE which is 8.
This can lead to higher effective max_weight than configured and also
deadlocks if a workqueue was depending on being able to handle chains of
interdependent work items that are longer than 8.
I believe these should be fine given that the number of CPUs in each NUMA
node is usually higher than 8 and work item chain longer than 8 is pretty
unlikely. However, if these assumptions turn out to be wrong, we'll need
to add an interface to adjust min_active.
- Each unbound wq has an array of struct wq_node_nr_active which tracks
per-node nr_active. When its pwq wants to run a work item, it has to
obtain the matching node's nr_active. If over the node's max_active, the
pwq is queued on wq_node_nr_active->pending_pwqs. As work items finish,
the completion path round-robins the pending pwqs activating the first
inactive work item of each, which involves some pool lock dancing and
kicking other pools. It's not the simplest code but doesn't look too bad.
v4: - wq_adjust_max_active() updated to invoke wq_update_node_max_active().
- wq_adjust_max_active() is now protected by wq->mutex instead of
wq_pool_mutex.
v3: - wq_node_max_active() used to calculate per-node max_active on the fly
based on system-wide CPU online states. Lai pointed out that this can
lead to skewed distributions for workqueues with restricted cpumasks.
Update the max_active distribution to use per-workqueue effective
online CPU counts instead of system-wide and cache the calculation
results in node_nr_active->max.
v2: - wq->min/max_active now uses WRITE/READ_ONCE() as suggested by Lai.
Signed-off-by: Tejun Heo <tj@xxxxxxxxxx>
Reported-by: Naohiro Aota <Naohiro.Aota@xxxxxxx>
Link: http://lkml.kernel.org/r/dbu6wiwu3sdhmhikb2w6lns7b27gbobfavhjj57kwi2quafgwl@htjcc5oikcr3
Fixes: 636b927eba5b ("workqueue: Make unbound workqueues to use per-cpu pool_workqueues")
Reviewed-by: Lai Jiangshan <jiangshanlai@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
include/linux/workqueue.h | 35 +++-
kernel/workqueue.c | 341 ++++++++++++++++++++++++++++++++++----
2 files changed, 341 insertions(+), 35 deletions(-)
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index 24b1e5070f4d4..ad97453e7c3a3 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -405,6 +405,13 @@ enum {
WQ_MAX_ACTIVE = 512, /* I like 512, better ideas? */
WQ_UNBOUND_MAX_ACTIVE = WQ_MAX_ACTIVE,
WQ_DFL_ACTIVE = WQ_MAX_ACTIVE / 2,
+
+ /*
+ * Per-node default cap on min_active. Unless explicitly set, min_active
+ * is set to min(max_active, WQ_DFL_MIN_ACTIVE). For more details, see
+ * workqueue_struct->min_active definition.
+ */
+ WQ_DFL_MIN_ACTIVE = 8,
};
/*
@@ -447,11 +454,33 @@ extern struct workqueue_struct *system_freezable_power_efficient_wq;
* alloc_workqueue - allocate a workqueue
* @fmt: printf format for the name of the workqueue
* @flags: WQ_* flags
- * @max_active: max in-flight work items per CPU, 0 for default
+ * @max_active: max in-flight work items, 0 for default
* remaining args: args for @fmt
*
- * Allocate a workqueue with the specified parameters. For detailed
- * information on WQ_* flags, please refer to
+ * For a per-cpu workqueue, @max_active limits the number of in-flight work
+ * items for each CPU. e.g. @max_active of 1 indicates that each CPU can be
+ * executing at most one work item for the workqueue.
+ *
+ * For unbound workqueues, @max_active limits the number of in-flight work items
+ * for the whole system. e.g. @max_active of 16 indicates that that there can be
+ * at most 16 work items executing for the workqueue in the whole system.
+ *
+ * As sharing the same active counter for an unbound workqueue across multiple
+ * NUMA nodes can be expensive, @max_active is distributed to each NUMA node
+ * according to the proportion of the number of online CPUs and enforced
+ * independently.
+ *
+ * Depending on online CPU distribution, a node may end up with per-node
+ * max_active which is significantly lower than @max_active, which can lead to
+ * deadlocks if the per-node concurrency limit is lower than the maximum number
+ * of interdependent work items for the workqueue.
+ *
+ * To guarantee forward progress regardless of online CPU distribution, the
+ * concurrency limit on every node is guaranteed to be equal to or greater than
+ * min_active which is set to min(@max_active, %WQ_DFL_MIN_ACTIVE). This means
+ * that the sum of per-node max_active's may be larger than @max_active.
+ *
+ * For detailed information on %WQ_* flags, please refer to
* Documentation/core-api/workqueue.rst.
*
* RETURNS:
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 252ad3bfe7998..b2975e44dffa9 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -122,6 +122,9 @@ enum {
*
* L: pool->lock protected. Access with pool->lock held.
*
+ * LN: pool->lock and wq_node_nr_active->lock protected for writes. Either for
+ * reads.
+ *
* K: Only modified by worker while holding pool->lock. Can be safely read by
* self, while holding pool->lock or from IRQ context if %current is the
* kworker.
@@ -243,17 +246,18 @@ struct pool_workqueue {
* pwq->inactive_works instead of pool->worklist and marked with
* WORK_STRUCT_INACTIVE.
*
- * All work items marked with WORK_STRUCT_INACTIVE do not participate
- * in pwq->nr_active and all work items in pwq->inactive_works are
- * marked with WORK_STRUCT_INACTIVE. But not all WORK_STRUCT_INACTIVE
- * work items are in pwq->inactive_works. Some of them are ready to
- * run in pool->worklist or worker->scheduled. Those work itmes are
- * only struct wq_barrier which is used for flush_work() and should
- * not participate in pwq->nr_active. For non-barrier work item, it
- * is marked with WORK_STRUCT_INACTIVE iff it is in pwq->inactive_works.
+ * All work items marked with WORK_STRUCT_INACTIVE do not participate in
+ * nr_active and all work items in pwq->inactive_works are marked with
+ * WORK_STRUCT_INACTIVE. But not all WORK_STRUCT_INACTIVE work items are
+ * in pwq->inactive_works. Some of them are ready to run in
+ * pool->worklist or worker->scheduled. Those work itmes are only struct
+ * wq_barrier which is used for flush_work() and should not participate
+ * in nr_active. For non-barrier work item, it is marked with
+ * WORK_STRUCT_INACTIVE iff it is in pwq->inactive_works.
*/
int nr_active; /* L: nr of active works */
struct list_head inactive_works; /* L: inactive works */
+ struct list_head pending_node; /* LN: node on wq_node_nr_active->pending_pwqs */
struct list_head pwqs_node; /* WR: node on wq->pwqs */
struct list_head mayday_node; /* MD: node on wq->maydays */
@@ -285,9 +289,19 @@ struct wq_device;
* on each CPU, in an unbound workqueue, max_active applies to the whole system.
* As sharing a single nr_active across multiple sockets can be very expensive,
* the counting and enforcement is per NUMA node.
+ *
+ * The following struct is used to enforce per-node max_active. When a pwq wants
+ * to start executing a work item, it should increment ->nr using
+ * tryinc_node_nr_active(). If acquisition fails due to ->nr already being over
+ * ->max, the pwq is queued on ->pending_pwqs. As in-flight work items finish
+ * and decrement ->nr, node_activate_pending_pwq() activates the pending pwqs in
+ * round-robin order.
*/
struct wq_node_nr_active {
- atomic_t nr; /* per-node nr_active count */
+ int max; /* per-node max_active */
+ atomic_t nr; /* per-node nr_active */
+ raw_spinlock_t lock; /* nests inside pool locks */
+ struct list_head pending_pwqs; /* LN: pwqs with inactive works */
};
/*
@@ -310,8 +324,12 @@ struct workqueue_struct {
struct worker *rescuer; /* MD: rescue worker */
int nr_drainers; /* WQ: drain in progress */
+
+ /* See alloc_workqueue() function comment for info on min/max_active */
int max_active; /* WO: max active works */
+ int min_active; /* WO: min active works */
int saved_max_active; /* WQ: saved max_active */
+ int saved_min_active; /* WQ: saved min_active */
struct workqueue_attrs *unbound_attrs; /* PW: only for unbound wqs */
struct pool_workqueue __rcu *dfl_pwq; /* PW: only for unbound wqs */
@@ -657,6 +675,19 @@ static struct pool_workqueue *unbound_pwq(struct workqueue_struct *wq, int cpu)
lockdep_is_held(&wq->mutex));
}
+/**
+ * unbound_effective_cpumask - effective cpumask of an unbound workqueue
+ * @wq: workqueue of interest
+ *
+ * @wq->unbound_attrs->cpumask contains the cpumask requested by the user which
+ * is masked with wq_unbound_cpumask to determine the effective cpumask. The
+ * default pwq is always mapped to the pool with the current effective cpumask.
+ */
+static struct cpumask *unbound_effective_cpumask(struct workqueue_struct *wq)
+{
+ return unbound_pwq(wq, -1)->pool->attrs->__pod_cpumask;
+}
+
static unsigned int work_color_to_flags(int color)
{
return color << WORK_STRUCT_COLOR_SHIFT;
@@ -1451,6 +1482,46 @@ static struct wq_node_nr_active *wq_node_nr_active(struct workqueue_struct *wq,
return wq->node_nr_active[node];
}
+/**
+ * wq_update_node_max_active - Update per-node max_actives to use
+ * @wq: workqueue to update
+ * @off_cpu: CPU that's going down, -1 if a CPU is not going down
+ *
+ * Update @wq->node_nr_active[]->max. @wq must be unbound. max_active is
+ * distributed among nodes according to the proportions of numbers of online
+ * cpus. The result is always between @wq->min_active and max_active.
+ */
+static void wq_update_node_max_active(struct workqueue_struct *wq, int off_cpu)
+{
+ struct cpumask *effective = unbound_effective_cpumask(wq);
+ int min_active = READ_ONCE(wq->min_active);
+ int max_active = READ_ONCE(wq->max_active);
+ int total_cpus, node;
+
+ lockdep_assert_held(&wq->mutex);
+
+ if (!cpumask_test_cpu(off_cpu, effective))
+ off_cpu = -1;
+
+ total_cpus = cpumask_weight_and(effective, cpu_online_mask);
+ if (off_cpu >= 0)
+ total_cpus--;
+
+ for_each_node(node) {
+ int node_cpus;
+
+ node_cpus = cpumask_weight_and(effective, cpumask_of_node(node));
+ if (off_cpu >= 0 && cpu_to_node(off_cpu) == node)
+ node_cpus--;
+
+ wq_node_nr_active(wq, node)->max =
+ clamp(DIV_ROUND_UP(max_active * node_cpus, total_cpus),
+ min_active, max_active);
+ }
+
+ wq_node_nr_active(wq, NUMA_NO_NODE)->max = min_active;
+}
+
/**
* get_pwq - get an extra reference on the specified pool_workqueue
* @pwq: pool_workqueue to get
@@ -1548,35 +1619,98 @@ static bool pwq_activate_work(struct pool_workqueue *pwq,
return true;
}
+static bool tryinc_node_nr_active(struct wq_node_nr_active *nna)
+{
+ int max = READ_ONCE(nna->max);
+
+ while (true) {
+ int old, tmp;
+
+ old = atomic_read(&nna->nr);
+ if (old >= max)
+ return false;
+ tmp = atomic_cmpxchg_relaxed(&nna->nr, old, old + 1);
+ if (tmp == old)
+ return true;
+ }
+}
+
/**
* pwq_tryinc_nr_active - Try to increment nr_active for a pwq
* @pwq: pool_workqueue of interest
+ * @fill: max_active may have increased, try to increase concurrency level
*
* Try to increment nr_active for @pwq. Returns %true if an nr_active count is
* successfully obtained. %false otherwise.
*/
-static bool pwq_tryinc_nr_active(struct pool_workqueue *pwq)
+static bool pwq_tryinc_nr_active(struct pool_workqueue *pwq, bool fill)
{
struct workqueue_struct *wq = pwq->wq;
struct worker_pool *pool = pwq->pool;
struct wq_node_nr_active *nna = wq_node_nr_active(wq, pool->node);
- bool obtained;
+ bool obtained = false;
lockdep_assert_held(&pool->lock);
- obtained = pwq->nr_active < READ_ONCE(wq->max_active);
+ if (!nna) {
+ /* per-cpu workqueue, pwq->nr_active is sufficient */
+ obtained = pwq->nr_active < READ_ONCE(wq->max_active);
+ goto out;
+ }
+
+ /*
+ * Unbound workqueue uses per-node shared nr_active $nna. If @pwq is
+ * already waiting on $nna, pwq_dec_nr_active() will maintain the
+ * concurrency level. Don't jump the line.
+ *
+ * We need to ignore the pending test after max_active has increased as
+ * pwq_dec_nr_active() can only maintain the concurrency level but not
+ * increase it. This is indicated by @fill.
+ */
+ if (!list_empty(&pwq->pending_node) && likely(!fill))
+ goto out;
+
+ obtained = tryinc_node_nr_active(nna);
+ if (obtained)
+ goto out;
+
+ /*
+ * Lockless acquisition failed. Lock, add ourself to $nna->pending_pwqs
+ * and try again. The smp_mb() is paired with the implied memory barrier
+ * of atomic_dec_return() in pwq_dec_nr_active() to ensure that either
+ * we see the decremented $nna->nr or they see non-empty
+ * $nna->pending_pwqs.
+ */
+ raw_spin_lock(&nna->lock);
+
+ if (list_empty(&pwq->pending_node))
+ list_add_tail(&pwq->pending_node, &nna->pending_pwqs);
+ else if (likely(!fill))
+ goto out_unlock;
+
+ smp_mb();
+
+ obtained = tryinc_node_nr_active(nna);
- if (obtained) {
+ /*
+ * If @fill, @pwq might have already been pending. Being spuriously
+ * pending in cold paths doesn't affect anything. Let's leave it be.
+ */
+ if (obtained && likely(!fill))
+ list_del_init(&pwq->pending_node);
+
+out_unlock:
+ raw_spin_unlock(&nna->lock);
+out:
+ if (obtained)
pwq->nr_active++;
- if (nna)
- atomic_inc(&nna->nr);
- }
return obtained;
}
/**
* pwq_activate_first_inactive - Activate the first inactive work item on a pwq
* @pwq: pool_workqueue of interest
+ * @fill: max_active may have increased, try to increase concurrency level
*
* Activate the first inactive work item of @pwq if available and allowed by
* max_active limit.
@@ -1584,13 +1718,13 @@ static bool pwq_tryinc_nr_active(struct pool_workqueue *pwq)
* Returns %true if an inactive work item has been activated. %false if no
* inactive work item is found or max_active limit is reached.
*/
-static bool pwq_activate_first_inactive(struct pool_workqueue *pwq)
+static bool pwq_activate_first_inactive(struct pool_workqueue *pwq, bool fill)
{
struct work_struct *work =
list_first_entry_or_null(&pwq->inactive_works,
struct work_struct, entry);
- if (work && pwq_tryinc_nr_active(pwq)) {
+ if (work && pwq_tryinc_nr_active(pwq, fill)) {
__pwq_activate_work(pwq, work);
return true;
} else {
@@ -1598,11 +1732,93 @@ static bool pwq_activate_first_inactive(struct pool_workqueue *pwq)
}
}
+/**
+ * node_activate_pending_pwq - Activate a pending pwq on a wq_node_nr_active
+ * @nna: wq_node_nr_active to activate a pending pwq for
+ * @caller_pool: worker_pool the caller is locking
+ *
+ * Activate a pwq in @nna->pending_pwqs. Called with @caller_pool locked.
+ * @caller_pool may be unlocked and relocked to lock other worker_pools.
+ */
+static void node_activate_pending_pwq(struct wq_node_nr_active *nna,
+ struct worker_pool *caller_pool)
+{
+ struct worker_pool *locked_pool = caller_pool;
+ struct pool_workqueue *pwq;
+ struct work_struct *work;
+
+ lockdep_assert_held(&caller_pool->lock);
+
+ raw_spin_lock(&nna->lock);
+retry:
+ pwq = list_first_entry_or_null(&nna->pending_pwqs,
+ struct pool_workqueue, pending_node);
+ if (!pwq)
+ goto out_unlock;
+
+ /*
+ * If @pwq is for a different pool than @locked_pool, we need to lock
+ * @pwq->pool->lock. Let's trylock first. If unsuccessful, do the unlock
+ * / lock dance. For that, we also need to release @nna->lock as it's
+ * nested inside pool locks.
+ */
+ if (pwq->pool != locked_pool) {
+ raw_spin_unlock(&locked_pool->lock);
+ locked_pool = pwq->pool;
+ if (!raw_spin_trylock(&locked_pool->lock)) {
+ raw_spin_unlock(&nna->lock);
+ raw_spin_lock(&locked_pool->lock);
+ raw_spin_lock(&nna->lock);
+ goto retry;
+ }
+ }
+
+ /*
+ * $pwq may not have any inactive work items due to e.g. cancellations.
+ * Drop it from pending_pwqs and see if there's another one.
+ */
+ work = list_first_entry_or_null(&pwq->inactive_works,
+ struct work_struct, entry);
+ if (!work) {
+ list_del_init(&pwq->pending_node);
+ goto retry;
+ }
+
+ /*
+ * Acquire an nr_active count and activate the inactive work item. If
+ * $pwq still has inactive work items, rotate it to the end of the
+ * pending_pwqs so that we round-robin through them. This means that
+ * inactive work items are not activated in queueing order which is fine
+ * given that there has never been any ordering across different pwqs.
+ */
+ if (likely(tryinc_node_nr_active(nna))) {
+ pwq->nr_active++;
+ __pwq_activate_work(pwq, work);
+
+ if (list_empty(&pwq->inactive_works))
+ list_del_init(&pwq->pending_node);
+ else
+ list_move_tail(&pwq->pending_node, &nna->pending_pwqs);
+
+ /* if activating a foreign pool, make sure it's running */
+ if (pwq->pool != caller_pool)
+ kick_pool(pwq->pool);
+ }
+
+out_unlock:
+ raw_spin_unlock(&nna->lock);
+ if (locked_pool != caller_pool) {
+ raw_spin_unlock(&locked_pool->lock);
+ raw_spin_lock(&caller_pool->lock);
+ }
+}
+
/**
* pwq_dec_nr_active - Retire an active count
* @pwq: pool_workqueue of interest
*
* Decrement @pwq's nr_active and try to activate the first inactive work item.
+ * For unbound workqueues, this function may temporarily drop @pwq->pool->lock.
*/
static void pwq_dec_nr_active(struct pool_workqueue *pwq)
{
@@ -1622,12 +1838,29 @@ static void pwq_dec_nr_active(struct pool_workqueue *pwq)
* inactive work item on @pwq itself.
*/
if (!nna) {
- pwq_activate_first_inactive(pwq);
+ pwq_activate_first_inactive(pwq, false);
return;
}
- atomic_dec(&nna->nr);
- pwq_activate_first_inactive(pwq);
+ /*
+ * If @pwq is for an unbound workqueue, it's more complicated because
+ * multiple pwqs and pools may be sharing the nr_active count. When a
+ * pwq needs to wait for an nr_active count, it puts itself on
+ * $nna->pending_pwqs. The following atomic_dec_return()'s implied
+ * memory barrier is paired with smp_mb() in pwq_tryinc_nr_active() to
+ * guarantee that either we see non-empty pending_pwqs or they see
+ * decremented $nna->nr.
+ *
+ * $nna->max may change as CPUs come online/offline and @pwq->wq's
+ * max_active gets updated. However, it is guaranteed to be equal to or
+ * larger than @pwq->wq->min_active which is above zero unless freezing.
+ * This maintains the forward progress guarantee.
+ */
+ if (atomic_dec_return(&nna->nr) >= READ_ONCE(nna->max))
+ return;
+
+ if (!list_empty(&nna->pending_pwqs))
+ node_activate_pending_pwq(nna, pool);
}
/**
@@ -1948,7 +2181,7 @@ static void __queue_work(int cpu, struct workqueue_struct *wq,
* @work must also queue behind existing inactive work items to maintain
* ordering when max_active changes. See wq_adjust_max_active().
*/
- if (list_empty(&pwq->inactive_works) && pwq_tryinc_nr_active(pwq)) {
+ if (list_empty(&pwq->inactive_works) && pwq_tryinc_nr_active(pwq, false)) {
if (list_empty(&pool->worklist))
pool->watchdog_ts = jiffies;
@@ -3181,7 +3414,7 @@ static void insert_wq_barrier(struct pool_workqueue *pwq,
barr->task = current;
- /* The barrier work item does not participate in pwq->nr_active. */
+ /* The barrier work item does not participate in nr_active. */
work_flags |= WORK_STRUCT_INACTIVE;
/*
@@ -4097,6 +4330,8 @@ static void free_node_nr_active(struct wq_node_nr_active **nna_ar)
static void init_node_nr_active(struct wq_node_nr_active *nna)
{
atomic_set(&nna->nr, 0);
+ raw_spin_lock_init(&nna->lock);
+ INIT_LIST_HEAD(&nna->pending_pwqs);
}
/*
@@ -4336,6 +4571,15 @@ static void pwq_release_workfn(struct kthread_work *work)
mutex_unlock(&wq_pool_mutex);
}
+ if (!list_empty(&pwq->pending_node)) {
+ struct wq_node_nr_active *nna =
+ wq_node_nr_active(pwq->wq, pwq->pool->node);
+
+ raw_spin_lock_irq(&nna->lock);
+ list_del_init(&pwq->pending_node);
+ raw_spin_unlock_irq(&nna->lock);
+ }
+
call_rcu(&pwq->rcu, rcu_free_pwq);
/*
@@ -4361,6 +4605,7 @@ static void init_pwq(struct pool_workqueue *pwq, struct workqueue_struct *wq,
pwq->flush_color = -1;
pwq->refcnt = 1;
INIT_LIST_HEAD(&pwq->inactive_works);
+ INIT_LIST_HEAD(&pwq->pending_node);
INIT_LIST_HEAD(&pwq->pwqs_node);
INIT_LIST_HEAD(&pwq->mayday_node);
kthread_init_work(&pwq->release_work, pwq_release_workfn);
@@ -4568,6 +4813,9 @@ static void apply_wqattrs_commit(struct apply_wqattrs_ctx *ctx)
ctx->pwq_tbl[cpu]);
ctx->dfl_pwq = install_unbound_pwq(ctx->wq, -1, ctx->dfl_pwq);
+ /* update node_nr_active->max */
+ wq_update_node_max_active(ctx->wq, -1);
+
mutex_unlock(&ctx->wq->mutex);
}
@@ -4841,24 +5089,35 @@ static int init_rescuer(struct workqueue_struct *wq)
static void wq_adjust_max_active(struct workqueue_struct *wq)
{
bool activated;
+ int new_max, new_min;
lockdep_assert_held(&wq->mutex);
if ((wq->flags & WQ_FREEZABLE) && workqueue_freezing) {
- WRITE_ONCE(wq->max_active, 0);
- return;
+ new_max = 0;
+ new_min = 0;
+ } else {
+ new_max = wq->saved_max_active;
+ new_min = wq->saved_min_active;
}
- if (wq->max_active == wq->saved_max_active)
+ if (wq->max_active == new_max && wq->min_active == new_min)
return;
/*
- * Update @wq->max_active and then kick inactive work items if more
+ * Update @wq->max/min_active and then kick inactive work items if more
* active work items are allowed. This doesn't break work item ordering
* because new work items are always queued behind existing inactive
* work items if there are any.
*/
- WRITE_ONCE(wq->max_active, wq->saved_max_active);
+ WRITE_ONCE(wq->max_active, new_max);
+ WRITE_ONCE(wq->min_active, new_min);
+
+ if (wq->flags & WQ_UNBOUND)
+ wq_update_node_max_active(wq, -1);
+
+ if (new_max == 0)
+ return;
/*
* Round-robin through pwq's activating the first inactive work item
@@ -4873,7 +5132,7 @@ static void wq_adjust_max_active(struct workqueue_struct *wq)
/* can be called during early boot w/ irq disabled */
raw_spin_lock_irqsave(&pwq->pool->lock, flags);
- if (pwq_activate_first_inactive(pwq)) {
+ if (pwq_activate_first_inactive(pwq, true)) {
activated = true;
kick_pool(pwq->pool);
}
@@ -4935,7 +5194,9 @@ struct workqueue_struct *alloc_workqueue(const char *fmt,
/* init wq */
wq->flags = flags;
wq->max_active = max_active;
- wq->saved_max_active = max_active;
+ wq->min_active = min(max_active, WQ_DFL_MIN_ACTIVE);
+ wq->saved_max_active = wq->max_active;
+ wq->saved_min_active = wq->min_active;
mutex_init(&wq->mutex);
atomic_set(&wq->nr_pwqs_to_flush, 0);
INIT_LIST_HEAD(&wq->pwqs);
@@ -5101,7 +5362,8 @@ EXPORT_SYMBOL_GPL(destroy_workqueue);
* @wq: target workqueue
* @max_active: new max_active value.
*
- * Set max_active of @wq to @max_active.
+ * Set max_active of @wq to @max_active. See the alloc_workqueue() function
+ * comment.
*
* CONTEXT:
* Don't call from IRQ context.
@@ -5118,6 +5380,9 @@ void workqueue_set_max_active(struct workqueue_struct *wq, int max_active)
wq->flags &= ~__WQ_ORDERED;
wq->saved_max_active = max_active;
+ if (wq->flags & WQ_UNBOUND)
+ wq->saved_min_active = min(wq->saved_min_active, max_active);
+
wq_adjust_max_active(wq);
mutex_unlock(&wq->mutex);
@@ -5799,6 +6064,10 @@ int workqueue_online_cpu(unsigned int cpu)
for_each_cpu(tcpu, pt->pod_cpus[pt->cpu_pod[cpu]])
wq_update_pod(wq, tcpu, cpu, true);
+
+ mutex_lock(&wq->mutex);
+ wq_update_node_max_active(wq, -1);
+ mutex_unlock(&wq->mutex);
}
}
@@ -5827,6 +6096,10 @@ int workqueue_offline_cpu(unsigned int cpu)
for_each_cpu(tcpu, pt->pod_cpus[pt->cpu_pod[cpu]])
wq_update_pod(wq, tcpu, cpu, false);
+
+ mutex_lock(&wq->mutex);
+ wq_update_node_max_active(wq, cpu);
+ mutex_unlock(&wq->mutex);
}
}
mutex_unlock(&wq_pool_mutex);
@@ -7023,8 +7296,12 @@ void __init workqueue_init_topology(void)
* combinations to apply per-pod sharing.
*/
list_for_each_entry(wq, &workqueues, list) {
- for_each_online_cpu(cpu) {
+ for_each_online_cpu(cpu)
wq_update_pod(wq, cpu, cpu, true);
+ if (wq->flags & WQ_UNBOUND) {
+ mutex_lock(&wq->mutex);
+ wq_update_node_max_active(wq, -1);
+ mutex_unlock(&wq->mutex);
}
}
--
2.43.0
