From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> [ Upstream commit b7efebfeb2e8ad8187cdabba5f0212ba2e6c1069 ] Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> Link: https://lore.kernel.org/r/20230824211952.1397699-11-dmitry.baryshkov@xxxxxxxxxx Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx> Stable-dep-of: fc835b2311d4 ("arm64: dts: qcom: msm8998: declare VLS CLAMP register for USB3 PHY") Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 35 +++++++++++---------------- 1 file changed, 14 insertions(+), 21 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index e1b744d76251d..b3b1258f2d6f8 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -1982,7 +1982,7 @@ usb3_dwc3: dwc3@a800000 { interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&qusb2phy>, <&usb1_ssphy>; + phys = <&qusb2phy>, <&usb3phy>; phy-names = "usb2-phy", "usb3-phy"; snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; @@ -1991,33 +1991,26 @@ usb3_dwc3: dwc3@a800000 { usb3phy: phy@c010000 { compatible = "qcom,msm8998-qmp-usb3-phy"; - reg = <0x0c010000 0x18c>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x0c010000 0x1000>; clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB3_CLKREF_CLK>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_CLKREF_CLK>; - clock-names = "aux", "cfg_ahb", "ref"; + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; resets = <&gcc GCC_USB3_PHY_BCR>, <&gcc GCC_USB3PHY_PHY_BCR>; - reset-names = "phy", "common"; + reset-names = "phy", + "phy_phy"; - usb1_ssphy: phy@c010200 { - reg = <0xc010200 0x128>, - <0xc010400 0x200>, - <0xc010c00 0x20c>, - <0xc010600 0x128>, - <0xc010800 0x200>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; + status = "disabled"; }; qusb2phy: phy@c012000 { -- 2.43.0
