From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> [ Upstream commit 01b086ccdeffac96f107228d581e0925e1c83f87 ] The QMP USB PHYs on msm8998, qcm2290 and some other platforms don't have the PCS_MISC_CLAMP_ENABLE register. Instead they need to toggle the register in the TCSR space. Make the new phy-qcom-qmp-usbc driver correctly handle the clamp register. Fixes: a51969fafc82 ("phy: qcom-qmp: Add QMP V3 USB3 PHY support for msm8998") Fixes: 8abe5e778b2c ("phy: qcom-qmp: Add QCM2290 USB3 PHY support") Cc: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> Acked-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Link: https://lore.kernel.org/r/20240117-usbc-phy-vls-clamp-v2-3-a950c223f10f@xxxxxxxxxx Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 48 ++++++++++++++++++------ 1 file changed, 37 insertions(+), 11 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c index 214cf4203de41..3a4b4849db0f5 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c @@ -10,11 +10,13 @@ #include <linux/io.h> #include <linux/iopoll.h> #include <linux/kernel.h> +#include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> +#include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/reset.h> #include <linux/slab.h> @@ -56,9 +58,6 @@ /* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */ #define IRQ_CLEAR BIT(0) -/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */ -#define CLAMP_EN BIT(0) /* enables i/o clamp_n */ - #define PHY_INIT_COMPLETE_TIMEOUT 10000 struct qmp_phy_init_tbl { @@ -94,7 +93,6 @@ enum qphy_reg_layout { QPHY_PCS_AUTONOMOUS_MODE_CTRL, QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR, QPHY_PCS_POWER_DOWN_CONTROL, - QPHY_PCS_MISC_CLAMP_ENABLE, /* Keep last to ensure regs_layout arrays are properly initialized */ QPHY_LAYOUT_SIZE }; @@ -106,7 +104,6 @@ static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = { [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = QPHY_V3_PCS_AUTONOMOUS_MODE_CTRL, [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V3_PCS_LFPS_RXTERM_IRQ_CLEAR, [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V3_PCS_POWER_DOWN_CONTROL, - [QPHY_PCS_MISC_CLAMP_ENABLE] = QPHY_V3_PCS_MISC_CLAMP_ENABLE, }; static const unsigned int qmp_v3_usb3phy_regs_layout_qcm2290[QPHY_LAYOUT_SIZE] = { @@ -369,6 +366,9 @@ struct qmp_usbc { void __iomem *tx2; void __iomem *rx2; + struct regmap *tcsr_map; + u32 vls_clamp_reg; + struct clk *pipe_clk; struct clk_bulk_data *clks; int num_clks; @@ -691,7 +691,6 @@ static void qmp_usbc_enable_autonomous_mode(struct qmp_usbc *qmp) { const struct qmp_phy_cfg *cfg = qmp->cfg; void __iomem *pcs = qmp->pcs; - void __iomem *pcs_misc = qmp->pcs_misc; u32 intr_mask; if (qmp->mode == PHY_MODE_USB_HOST_SS || @@ -712,19 +711,18 @@ static void qmp_usbc_enable_autonomous_mode(struct qmp_usbc *qmp) qphy_setbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask); /* Enable i/o clamp_n for autonomous mode */ - if (pcs_misc && cfg->regs[QPHY_PCS_MISC_CLAMP_ENABLE]) - qphy_clrbits(pcs_misc, cfg->regs[QPHY_PCS_MISC_CLAMP_ENABLE], CLAMP_EN); + if (qmp->tcsr_map && qmp->vls_clamp_reg) + regmap_write(qmp->tcsr_map, qmp->vls_clamp_reg, 1); } static void qmp_usbc_disable_autonomous_mode(struct qmp_usbc *qmp) { const struct qmp_phy_cfg *cfg = qmp->cfg; void __iomem *pcs = qmp->pcs; - void __iomem *pcs_misc = qmp->pcs_misc; /* Disable i/o clamp_n on resume for normal mode */ - if (pcs_misc && cfg->regs[QPHY_PCS_MISC_CLAMP_ENABLE]) - qphy_setbits(pcs_misc, cfg->regs[QPHY_PCS_MISC_CLAMP_ENABLE], CLAMP_EN); + if (qmp->tcsr_map && qmp->vls_clamp_reg) + regmap_write(qmp->tcsr_map, qmp->vls_clamp_reg, 0); qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL | ALFPS_DTCT_EN); @@ -1063,6 +1061,30 @@ static int qmp_usbc_parse_dt(struct qmp_usbc *qmp) return 0; } +static int qmp_usbc_parse_vls_clamp(struct qmp_usbc *qmp) +{ + struct of_phandle_args tcsr_args; + struct device *dev = qmp->dev; + int ret; + + /* for backwards compatibility ignore if there is no property */ + ret = of_parse_phandle_with_fixed_args(dev->of_node, "qcom,tcsr-reg", 1, 0, + &tcsr_args); + if (ret == -ENOENT) + return 0; + else if (ret < 0) + return dev_err_probe(dev, ret, "Failed to parse qcom,tcsr-reg\n"); + + qmp->tcsr_map = syscon_node_to_regmap(tcsr_args.np); + of_node_put(tcsr_args.np); + if (IS_ERR(qmp->tcsr_map)) + return PTR_ERR(qmp->tcsr_map); + + qmp->vls_clamp_reg = tcsr_args.args[0]; + + return 0; +} + static int qmp_usbc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -1093,6 +1115,10 @@ static int qmp_usbc_probe(struct platform_device *pdev) if (ret) return ret; + ret = qmp_usbc_parse_vls_clamp(qmp); + if (ret) + return ret; + /* Check for legacy binding with child node. */ np = of_get_child_by_name(dev->of_node, "phy"); if (np) { -- 2.43.0