From: Romain Naour <romain.naour@xxxxxxxx> [ Upstream commit 7f25d6926d178734db17cfc12f0b1841e82914da ] The tps659413 and tps659411 nodes set WKUP_GPIO0_7 (G28) pin as input to be used as PMIC interrupt but uses 9 (WKUP_GPIO0_9) as "interrupts" property. Replace 9 by 7 for both tps659413 and tps659411 after checking in the board schematic [1]. [1] https://www.ti.com/tool/SK-TDA4VM Fixes: b808cef0be46 ("arm64: dts: ti: k3-j721e-sk: Add TPS6594 family PMICs") Cc: Neha Malcom Francis <n-francis@xxxxxx> Signed-off-by: Romain Naour <romain.naour@xxxxxxxx> Reviewed-by: Neha Malcom Francis <n-francis@xxxxxx> Link: https://lore.kernel.org/r/20240209171146.307465-2-romain.naour@xxxxxxxx Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index 188dfe291a32b..658764f7d5443 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -574,7 +574,7 @@ tps659413: pmic@48 { pinctrl-names = "default"; pinctrl-0 = <&pmic_irq_pins_default>; interrupt-parent = <&wkup_gpio0>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; gpio-controller; #gpio-cells = <2>; ti,primary-pmic; @@ -651,7 +651,7 @@ tps659411: pmic@4c { reg = <0x4c>; system-power-controller; interrupt-parent = <&wkup_gpio0>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; gpio-controller; #gpio-cells = <2>; buck1234-supply = <&vsys_3v3>; -- 2.43.0
