From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
[ Upstream commit 788715b5f21c6455264fe00a1779e61bec407fe2 ]
Before proceeding with the probe and enabling frequency scaling for the
CPUs, make sure that all supplies feeding the CPUs have probed.
This fixes an issue observed on MT8195-Tomato where if the
mediatek-cpufreq-hw driver enabled the hardware (by writing to
REG_FREQ_ENABLE) before the SPMI controller driver (spmi-mtk-pmif),
behind which lies the big CPU supply, probed the platform would hang
shortly after with "rcu: INFO: rcu_preempt detected stalls on
CPUs/tasks" being printed in the log.
Fixes: 4855e26bcf4d ("cpufreq: mediatek-hw: Add support for CPUFREQ HW")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
Reviewed-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>
Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/cpufreq/mediatek-cpufreq-hw.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/cpufreq/mediatek-cpufreq-hw.c b/drivers/cpufreq/mediatek-cpufreq-hw.c
index d46afb3c00923..a1aa9385980ae 100644
--- a/drivers/cpufreq/mediatek-cpufreq-hw.c
+++ b/drivers/cpufreq/mediatek-cpufreq-hw.c
@@ -13,6 +13,7 @@
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#define LUT_MAX_ENTRIES 32U
@@ -300,7 +301,23 @@ static struct cpufreq_driver cpufreq_mtk_hw_driver = {
static int mtk_cpufreq_hw_driver_probe(struct platform_device *pdev)
{
const void *data;
- int ret;
+ int ret, cpu;
+ struct device *cpu_dev;
+ struct regulator *cpu_reg;
+
+ /* Make sure that all CPU supplies are available before proceeding. */
+ for_each_possible_cpu(cpu) {
+ cpu_dev = get_cpu_device(cpu);
+ if (!cpu_dev)
+ return dev_err_probe(&pdev->dev, -EPROBE_DEFER,
+ "Failed to get cpu%d device\n", cpu);
+
+ cpu_reg = devm_regulator_get_optional(cpu_dev, "cpu");
+ if (IS_ERR(cpu_reg))
+ return dev_err_probe(&pdev->dev, PTR_ERR(cpu_reg),
+ "CPU%d regulator get failed\n", cpu);
+ }
+
data = of_device_get_match_data(&pdev->dev);
if (!data)
--
2.43.0
