[PATCH 1/3] arm64: dts: qcom: sm8450: Fix the msi-map entries

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



While adding the GIC ITS MSI support, it was found that the msi-map entries
needed to be swapped to receive MSIs from the endpoint.

But later it was identified that the swapping was needed due to a bug in
the Qualcomm PCIe controller driver. And since the bug is now fixed with
commit bf79e33cdd89 ("PCI: qcom: Enable BDF to SID translation properly"),
let's fix the msi-map entries also to reflect the actual mapping in the
hardware.

Cc: <stable@xxxxxxxxxxxxxxx> # 6.3: bf79e33cdd89 ("PCI: qcom: Enable BDF to SID translation properly")
Fixes: ff384ab56f16 ("arm64: dts: qcom: sm8450: Use GIC-ITS for PCIe0 and PCIe1")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index b86be34a912b..024d2653cc30 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -1777,12 +1777,8 @@ pcie0: pcie@1c00000 {
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
 
-			/*
-			 * MSIs for BDF (1:0.0) only works with Device ID 0x5980.
-			 * Hence, the IDs are swapped.
-			 */
-			msi-map = <0x0 &gic_its 0x5981 0x1>,
-				  <0x100 &gic_its 0x5980 0x1>;
+			msi-map = <0x0 &gic_its 0x5980 0x1>,
+				  <0x100 &gic_its 0x5981 0x1>;
 			msi-map-mask = <0xff00>;
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
@@ -1900,12 +1896,8 @@ pcie1: pcie@1c08000 {
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			/*
-			 * MSIs for BDF (1:0.0) only works with Device ID 0x5a00.
-			 * Hence, the IDs are swapped.
-			 */
-			msi-map = <0x0 &gic_its 0x5a01 0x1>,
-				  <0x100 &gic_its 0x5a00 0x1>;
+			msi-map = <0x0 &gic_its 0x5a00 0x1>,
+				  <0x100 &gic_its 0x5a01 0x1>;
 			msi-map-mask = <0xff00>;
 			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,

-- 
2.25.1





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux