Re: [PATCH 5.4 015/267] arm64: dts: qcom: sdm845: fix USB wakeup interrupt types

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[ +TO: Sasha ]

On Thu, Mar 14, 2024 at 01:48:36AM +0800, Yongqin Liu wrote:
> On 2024/2/21 21:05, Greg Kroah-Hartman wrote:
> > 5.4-stable review patch.  If anyone has any objections, please let me know.

> > From: Johan Hovold <johan+linaro@xxxxxxxxxx>
> >
> > commit 84ad9ac8d9ca29033d589e79a991866b38e23b85 upstream.
> >
> > The DP/DM wakeup interrupts are edge triggered and which edge to trigger
> > on depends on use-case and whether a Low speed or Full/High speed device
> > is connected.
> >
> > Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
> > Cc: stable@xxxxxxxxxxxxxxx      # 4.20
> > Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> > Link: https://lore.kernel.org/r/20231120164331.8116-9-johan+linaro@xxxxxxxxxx
> > Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

> > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > @@ -2503,8 +2503,8 @@
> >   
> >   			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
> >   				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
> > -				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
> > -				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
> > +				     <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>,
> > +				     <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>;
> >   			interrupt-names = "hs_phy_irq", "ss_phy_irq",
> >   					  "dm_hs_phy_irq", "dp_hs_phy_irq";

> This patch only causes the db845c Android builds to fail to have the adb 
> connection setup after boot.

Indeed.

> In the serial console, the following lines are printed:

>    [    0.779411][   T79] dwc3-qcom a6f8800.usb: dp_hs_phy_irq failed: -22
>    [    0.779418][   T79] dwc3-qcom a6f8800.usb: failed to setup IRQs, 
> err=-22

> After some investigation, it's found it will work again if the following 
> two patches are applied:
>    72b67ebf9d24 ("arm64: dts: qcom: add PDC interrupt controller for 
> SDM845")
>    204f9ed4bad6 ("arm64: dts: qcom: sdm845: fix USB DP/DM HS PHY 
> interrupts")

Correct, apparently the PDC controller was not added until 5.10, which I
should have noticed and indicated in the commit message of the follow up
fix. Sorry about that.

> Could you please help to have a check and give some suggestions on what 
> patches should be back ported to the 5.4 kernel, or are the above two
> patches only good enough?

Based on a quick look at the sdm845 dtsi, the PDC driver and their
history, I think the two commits above should be enough.

Sasha, could you pick the following two commits for 5.4:

	72b67ebf9d24 ("arm64: dts: qcom: add PDC interrupt controller for SDM845")
	204f9ed4bad6 ("arm64: dts: qcom: sdm845: fix USB DP/DM HS PHY interrupts")

to fix the regression?

Johan




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux