The previous email misses the v3 on the subject, added on this one.
On Mon, 2024-03-11 at 12:11 +0000, Vitor Soares wrote:
> From: Vitor Soares <vitor.soares@xxxxxxxxxxx>
>
> When the mcp251xfd_start_xmit() function fails, the driver stops
> processing messages, and the interrupt routine does not return,
> running indefinitely even after killing the running application.
>
> Error messages:
> [ 441.298819] mcp251xfd spi2.0 can0: ERROR in mcp251xfd_start_xmit:
> -16
> [ 441.306498] mcp251xfd spi2.0 can0: Transmit Event FIFO buffer not
> empty. (seq=0x000017c7, tef_tail=0x000017cf, tef_head=0x000017d0,
> tx_head=0x000017d3).
> ... and repeat forever.
>
> The issue can be triggered when multiple devices share the same
> SPI interface. And there is concurrent access to the bus.
>
> The problem occurs because tx_ring->head increments even if
> mcp251xfd_start_xmit() fails. Consequently, the driver skips one
> TX package while still expecting a response in
> mcp251xfd_handle_tefif_one().
>
> This patch resolves the issue by decreasing tx_ring->head if
> mcp251xfd_start_xmit() fails. With the fix, if we trigger the issue
> and
> the err = -EBUSY, the driver returns NETDEV_TX_BUSY. The network
> stack
> retries to transmit the message.
> Otherwise, it prints an error and discards the message.
>
> Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip
> MCP25xxFD SPI CAN")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Vitor Soares <vitor.soares@xxxxxxxxxxx>
> ---
>
> V2->V3:
> - Add tx_dropped stats.
> - netdev_sent_queue() only if can_put_echo_skb() succeed.
>
> V1->V2:
> - Return NETDEV_TX_BUSY if mcp251xfd_tx_obj_write() == -EBUSY.
> - Rework the commit message to address the change above.
> - Change can_put_echo_skb() to be called after
> mcp251xfd_tx_obj_write() succeed.
> Otherwise, we get Kernel NULL pointer dereference error.
>
> drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c | 34 ++++++++++++------
> --
> 1 file changed, 21 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c
> b/drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c
> index 160528d3cc26..146c44e47c60 100644
> --- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c
> +++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c
> @@ -166,6 +166,7 @@ netdev_tx_t mcp251xfd_start_xmit(struct sk_buff
> *skb,
> struct net_device *ndev)
> {
> struct mcp251xfd_priv *priv = netdev_priv(ndev);
> + struct net_device_stats *stats = &ndev->stats;
> struct mcp251xfd_tx_ring *tx_ring = priv->tx;
> struct mcp251xfd_tx_obj *tx_obj;
> unsigned int frame_len;
> @@ -181,25 +182,32 @@ netdev_tx_t mcp251xfd_start_xmit(struct sk_buff
> *skb,
> tx_obj = mcp251xfd_get_tx_obj_next(tx_ring);
> mcp251xfd_tx_obj_from_skb(priv, tx_obj, skb, tx_ring->head);
>
> - /* Stop queue if we occupy the complete TX FIFO */
> tx_head = mcp251xfd_get_tx_head(tx_ring);
> - tx_ring->head++;
> - if (mcp251xfd_get_tx_free(tx_ring) == 0)
> - netif_stop_queue(ndev);
> -
> frame_len = can_skb_get_frame_len(skb);
> - err = can_put_echo_skb(skb, ndev, tx_head, frame_len);
> - if (!err)
> - netdev_sent_queue(priv->ndev, frame_len);
> +
> + tx_ring->head++;
>
> err = mcp251xfd_tx_obj_write(priv, tx_obj);
> - if (err)
> - goto out_err;
> + if (err) {
> + tx_ring->head--;
>
> - return NETDEV_TX_OK;
> + if (err == -EBUSY)
> + return NETDEV_TX_BUSY;
>
> - out_err:
> - netdev_err(priv->ndev, "ERROR in %s: %d\n", __func__, err);
> + stats->tx_dropped++;
> +
> + if (net_ratelimit())
> + netdev_err(priv->ndev,
> + "ERROR in %s: %d\n", __func__,
> err);
> + } else {
> + err = can_put_echo_skb(skb, ndev, tx_head,
> frame_len);
> + if (!err)
> + netdev_sent_queue(priv->ndev, frame_len);
> +
> + /* Stop queue if we occupy the complete TX FIFO */
> + if (mcp251xfd_get_tx_free(tx_ring) == 0)
> + netif_stop_queue(ndev);
> + }
>
> return NETDEV_TX_OK;
> }
