On 07.03.2024 12:04:42, Vitor Soares wrote:
> From: Vitor Soares <vitor.soares@xxxxxxxxxxx>
>
> When the mcp251xfd_start_xmit() function fails, the driver stops
> processing messages, and the interrupt routine does not return,
> running indefinitely even after killing the running application.
>
> Error messages:
> [ 441.298819] mcp251xfd spi2.0 can0: ERROR in mcp251xfd_start_xmit: -16
> [ 441.306498] mcp251xfd spi2.0 can0: Transmit Event FIFO buffer not empty. (seq=0x000017c7, tef_tail=0x000017cf, tef_head=0x000017d0, tx_head=0x000017d3).
> ... and repeat forever.
>
> The issue can be triggered when multiple devices share the same
> SPI interface. And there is concurrent access to the bus.
>
> The problem occurs because tx_ring->head increments even if
> mcp251xfd_start_xmit() fails. Consequently, the driver skips one
> TX package while still expecting a response in
> mcp251xfd_handle_tefif_one().
>
> This patch resolves the issue by decreasing tx_ring->head if
> mcp251xfd_start_xmit() fails. With the fix, if we attempt to trigger
> the issue again, the driver prints an error and discard the message.
What about returning NETDEV_TX_BUSY, then the networking stack will
retry.
> Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Vitor Soares <vitor.soares@xxxxxxxxxxx>
> ---
> drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c | 27 ++++++++++----------
> 1 file changed, 14 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c
> index 160528d3cc26..a8eb941c1b95 100644
> --- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c
> +++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c
> @@ -181,25 +181,26 @@ netdev_tx_t mcp251xfd_start_xmit(struct sk_buff *skb,
> tx_obj = mcp251xfd_get_tx_obj_next(tx_ring);
> mcp251xfd_tx_obj_from_skb(priv, tx_obj, skb, tx_ring->head);
>
> - /* Stop queue if we occupy the complete TX FIFO */
> tx_head = mcp251xfd_get_tx_head(tx_ring);
> - tx_ring->head++;
> - if (mcp251xfd_get_tx_free(tx_ring) == 0)
> - netif_stop_queue(ndev);
> -
> frame_len = can_skb_get_frame_len(skb);
> - err = can_put_echo_skb(skb, ndev, tx_head, frame_len);
> - if (!err)
> - netdev_sent_queue(priv->ndev, frame_len);
> + can_put_echo_skb(skb, ndev, tx_head, frame_len);
> +
> + tx_ring->head++;
>
> err = mcp251xfd_tx_obj_write(priv, tx_obj);
> - if (err)
> - goto out_err;
> + if (err) {
> + can_free_echo_skb(ndev, tx_head, NULL);
>
> - return NETDEV_TX_OK;
> + tx_ring->head--;
> +
I'm not sure, if we want an error message for -EBUSY. We could add
proper ethtool statistics.
> + netdev_err(priv->ndev, "ERROR in %s: %d\n", __func__, err);
> + } else {
> + /* Stop queue if we occupy the complete TX FIFO */
> + if (mcp251xfd_get_tx_free(tx_ring) == 0)
> + netif_stop_queue(ndev);
>
> - out_err:
> - netdev_err(priv->ndev, "ERROR in %s: %d\n", __func__, err);
> + netdev_sent_queue(priv->ndev, frame_len);
> + }
>
> return NETDEV_TX_OK;
> }
regards,
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung Nürnberg | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
Attachment:
signature.asc
Description: PGP signature
