5.15-stable review patch. If anyone has any objections, please let me know. ------------------ From: Louis DeLosSantos <louis.delos.devel@xxxxxxxxx> commit 8ad77e72caae22a1ddcfd0c03f2884929e93b7a4 upstream. Add ability to specify routing table ID to the `bpf_fib_lookup` BPF helper. A new field `tbid` is added to `struct bpf_fib_lookup` used as parameters to the `bpf_fib_lookup` BPF helper. When the helper is called with the `BPF_FIB_LOOKUP_DIRECT` and `BPF_FIB_LOOKUP_TBID` flags the `tbid` field in `struct bpf_fib_lookup` will be used as the table ID for the fib lookup. If the `tbid` does not exist the fib lookup will fail with `BPF_FIB_LKUP_RET_NOT_FWDED`. The `tbid` field becomes a union over the vlan related output fields in `struct bpf_fib_lookup` and will be zeroed immediately after usage. This functionality is useful in containerized environments. For instance, if a CNI wants to dictate the next-hop for traffic leaving a container it can create a container-specific routing table and perform a fib lookup against this table in a "host-net-namespace-side" TC program. This functionality also allows `ip rule` like functionality at the TC layer, allowing an eBPF program to pick a routing table based on some aspect of the sk_buff. As a concrete use case, this feature will be used in Cilium's SRv6 L3VPN datapath. When egress traffic leaves a Pod an eBPF program attached by Cilium will determine which VRF the egress traffic should target, and then perform a FIB lookup in a specific table representing this VRF's FIB. Signed-off-by: Louis DeLosSantos <louis.delos.devel@xxxxxxxxx> Signed-off-by: Daniel Borkmann <daniel@xxxxxxxxxxxxx> Link: https://lore.kernel.org/bpf/20230505-bpf-add-tbid-fib-lookup-v2-1-0a31c22c748c@xxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- include/uapi/linux/bpf.h | 21 ++++++++++++++++++--- net/core/filter.c | 14 +++++++++++++- tools/include/uapi/linux/bpf.h | 21 ++++++++++++++++++--- 3 files changed, 49 insertions(+), 7 deletions(-) --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -3011,6 +3011,10 @@ union bpf_attr { * **BPF_FIB_LOOKUP_DIRECT** * Do a direct table lookup vs full lookup using FIB * rules. + * **BPF_FIB_LOOKUP_TBID** + * Used with BPF_FIB_LOOKUP_DIRECT. + * Use the routing table ID present in *params*->tbid + * for the fib lookup. * **BPF_FIB_LOOKUP_OUTPUT** * Perform lookup from an egress perspective (default is * ingress). @@ -6046,6 +6050,7 @@ enum { BPF_FIB_LOOKUP_DIRECT = (1U << 0), BPF_FIB_LOOKUP_OUTPUT = (1U << 1), BPF_FIB_LOOKUP_SKIP_NEIGH = (1U << 2), + BPF_FIB_LOOKUP_TBID = (1U << 3), }; enum { @@ -6106,9 +6111,19 @@ struct bpf_fib_lookup { __u32 ipv6_dst[4]; /* in6_addr; network order */ }; - /* output */ - __be16 h_vlan_proto; - __be16 h_vlan_TCI; + union { + struct { + /* output */ + __be16 h_vlan_proto; + __be16 h_vlan_TCI; + }; + /* input: when accompanied with the + * 'BPF_FIB_LOOKUP_DIRECT | BPF_FIB_LOOKUP_TBID` flags, a + * specific routing table to use for the fib lookup. + */ + __u32 tbid; + }; + __u8 smac[6]; /* ETH_ALEN */ __u8 dmac[6]; /* ETH_ALEN */ }; --- a/net/core/filter.c +++ b/net/core/filter.c @@ -5447,6 +5447,12 @@ static int bpf_ipv4_fib_lookup(struct ne u32 tbid = l3mdev_fib_table_rcu(dev) ? : RT_TABLE_MAIN; struct fib_table *tb; + if (flags & BPF_FIB_LOOKUP_TBID) { + tbid = params->tbid; + /* zero out for vlan output */ + params->tbid = 0; + } + tb = fib_get_table(net, tbid); if (unlikely(!tb)) return BPF_FIB_LKUP_RET_NOT_FWDED; @@ -5580,6 +5586,12 @@ static int bpf_ipv6_fib_lookup(struct ne u32 tbid = l3mdev_fib_table_rcu(dev) ? : RT_TABLE_MAIN; struct fib6_table *tb; + if (flags & BPF_FIB_LOOKUP_TBID) { + tbid = params->tbid; + /* zero out for vlan output */ + params->tbid = 0; + } + tb = ipv6_stub->fib6_get_table(net, tbid); if (unlikely(!tb)) return BPF_FIB_LKUP_RET_NOT_FWDED; @@ -5652,7 +5664,7 @@ set_fwd_params: #endif #define BPF_FIB_LOOKUP_MASK (BPF_FIB_LOOKUP_DIRECT | BPF_FIB_LOOKUP_OUTPUT | \ - BPF_FIB_LOOKUP_SKIP_NEIGH) + BPF_FIB_LOOKUP_SKIP_NEIGH | BPF_FIB_LOOKUP_TBID) BPF_CALL_4(bpf_xdp_fib_lookup, struct xdp_buff *, ctx, struct bpf_fib_lookup *, params, int, plen, u32, flags) --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -3011,6 +3011,10 @@ union bpf_attr { * **BPF_FIB_LOOKUP_DIRECT** * Do a direct table lookup vs full lookup using FIB * rules. + * **BPF_FIB_LOOKUP_TBID** + * Used with BPF_FIB_LOOKUP_DIRECT. + * Use the routing table ID present in *params*->tbid + * for the fib lookup. * **BPF_FIB_LOOKUP_OUTPUT** * Perform lookup from an egress perspective (default is * ingress). @@ -6046,6 +6050,7 @@ enum { BPF_FIB_LOOKUP_DIRECT = (1U << 0), BPF_FIB_LOOKUP_OUTPUT = (1U << 1), BPF_FIB_LOOKUP_SKIP_NEIGH = (1U << 2), + BPF_FIB_LOOKUP_TBID = (1U << 3), }; enum { @@ -6106,9 +6111,19 @@ struct bpf_fib_lookup { __u32 ipv6_dst[4]; /* in6_addr; network order */ }; - /* output */ - __be16 h_vlan_proto; - __be16 h_vlan_TCI; + union { + struct { + /* output */ + __be16 h_vlan_proto; + __be16 h_vlan_TCI; + }; + /* input: when accompanied with the + * 'BPF_FIB_LOOKUP_DIRECT | BPF_FIB_LOOKUP_TBID` flags, a + * specific routing table to use for the fib lookup. + */ + __u32 tbid; + }; + __u8 smac[6]; /* ETH_ALEN */ __u8 dmac[6]; /* ETH_ALEN */ };
