6.1-stable review patch. If anyone has any objections, please let me know. ------------------ From: Ard Biesheuvel <ardb@xxxxxxxxxx> commit cb8bda8ad4438b4bcfcf89697fc84803fb210017 upstream. In preparation for moving the mixed mode specific code out of head_64.S, rename the existing file to clarify that it contains more than just the mixed mode thunk. While at it, clean up the Makefile rules that add it to the build. Signed-off-by: Ard Biesheuvel <ardb@xxxxxxxxxx> Signed-off-by: Borislav Petkov <bp@xxxxxxx> Link: https://lore.kernel.org/r/20221122161017.2426828-2-ardb@xxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- arch/x86/boot/compressed/Makefile | 6 +++--- arch/x86/boot/compressed/{efi_thunk_64.S => efi_mixed.S} | 0 arch/x86/boot/compressed/Makefile | 6 arch/x86/boot/compressed/efi_mixed.S | 195 ++++++++++++++++++++++++++++++++ arch/x86/boot/compressed/efi_thunk_64.S | 195 -------------------------------- 3 files changed, 198 insertions(+), 198 deletions(-) rename arch/x86/boot/compressed/{efi_thunk_64.S => efi_mixed.S} (100%) --- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -108,11 +108,11 @@ endif vmlinux-objs-$(CONFIG_ACPI) += $(obj)/acpi.o vmlinux-objs-$(CONFIG_INTEL_TDX_GUEST) += $(obj)/tdx.o $(obj)/tdcall.o -vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_thunk_$(BITS).o vmlinux-objs-$(CONFIG_EFI) += $(obj)/efi.o -efi-obj-$(CONFIG_EFI_STUB) = $(objtree)/drivers/firmware/efi/libstub/lib.a +vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_mixed.o +vmlinux-objs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a -$(obj)/vmlinux: $(vmlinux-objs-y) $(efi-obj-y) FORCE +$(obj)/vmlinux: $(vmlinux-objs-y) FORCE $(call if_changed,ld) OBJCOPYFLAGS_vmlinux.bin := -R .comment -S --- /dev/null +++ b/arch/x86/boot/compressed/efi_mixed.S @@ -0,0 +1,195 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2014, 2015 Intel Corporation; author Matt Fleming + * + * Early support for invoking 32-bit EFI services from a 64-bit kernel. + * + * Because this thunking occurs before ExitBootServices() we have to + * restore the firmware's 32-bit GDT and IDT before we make EFI service + * calls. + * + * On the plus side, we don't have to worry about mangling 64-bit + * addresses into 32-bits because we're executing with an identity + * mapped pagetable and haven't transitioned to 64-bit virtual addresses + * yet. + */ + +#include <linux/linkage.h> +#include <asm/msr.h> +#include <asm/page_types.h> +#include <asm/processor-flags.h> +#include <asm/segment.h> + + .code64 + .text +SYM_FUNC_START(__efi64_thunk) + push %rbp + push %rbx + + movl %ds, %eax + push %rax + movl %es, %eax + push %rax + movl %ss, %eax + push %rax + + /* Copy args passed on stack */ + movq 0x30(%rsp), %rbp + movq 0x38(%rsp), %rbx + movq 0x40(%rsp), %rax + + /* + * Convert x86-64 ABI params to i386 ABI + */ + subq $64, %rsp + movl %esi, 0x0(%rsp) + movl %edx, 0x4(%rsp) + movl %ecx, 0x8(%rsp) + movl %r8d, 0xc(%rsp) + movl %r9d, 0x10(%rsp) + movl %ebp, 0x14(%rsp) + movl %ebx, 0x18(%rsp) + movl %eax, 0x1c(%rsp) + + leaq 0x20(%rsp), %rbx + sgdt (%rbx) + + addq $16, %rbx + sidt (%rbx) + + leaq 1f(%rip), %rbp + + /* + * Switch to IDT and GDT with 32-bit segments. This is the firmware GDT + * and IDT that was installed when the kernel started executing. The + * pointers were saved at the EFI stub entry point in head_64.S. + * + * Pass the saved DS selector to the 32-bit code, and use far return to + * restore the saved CS selector. + */ + leaq efi32_boot_idt(%rip), %rax + lidt (%rax) + leaq efi32_boot_gdt(%rip), %rax + lgdt (%rax) + + movzwl efi32_boot_ds(%rip), %edx + movzwq efi32_boot_cs(%rip), %rax + pushq %rax + leaq efi_enter32(%rip), %rax + pushq %rax + lretq + +1: addq $64, %rsp + movq %rdi, %rax + + pop %rbx + movl %ebx, %ss + pop %rbx + movl %ebx, %es + pop %rbx + movl %ebx, %ds + /* Clear out 32-bit selector from FS and GS */ + xorl %ebx, %ebx + movl %ebx, %fs + movl %ebx, %gs + + /* + * Convert 32-bit status code into 64-bit. + */ + roll $1, %eax + rorq $1, %rax + + pop %rbx + pop %rbp + RET +SYM_FUNC_END(__efi64_thunk) + + .code32 +/* + * EFI service pointer must be in %edi. + * + * The stack should represent the 32-bit calling convention. + */ +SYM_FUNC_START_LOCAL(efi_enter32) + /* Load firmware selector into data and stack segment registers */ + movl %edx, %ds + movl %edx, %es + movl %edx, %fs + movl %edx, %gs + movl %edx, %ss + + /* Reload pgtables */ + movl %cr3, %eax + movl %eax, %cr3 + + /* Disable paging */ + movl %cr0, %eax + btrl $X86_CR0_PG_BIT, %eax + movl %eax, %cr0 + + /* Disable long mode via EFER */ + movl $MSR_EFER, %ecx + rdmsr + btrl $_EFER_LME, %eax + wrmsr + + call *%edi + + /* We must preserve return value */ + movl %eax, %edi + + /* + * Some firmware will return with interrupts enabled. Be sure to + * disable them before we switch GDTs and IDTs. + */ + cli + + lidtl (%ebx) + subl $16, %ebx + + lgdtl (%ebx) + + movl %cr4, %eax + btsl $(X86_CR4_PAE_BIT), %eax + movl %eax, %cr4 + + movl %cr3, %eax + movl %eax, %cr3 + + movl $MSR_EFER, %ecx + rdmsr + btsl $_EFER_LME, %eax + wrmsr + + xorl %eax, %eax + lldt %ax + + pushl $__KERNEL_CS + pushl %ebp + + /* Enable paging */ + movl %cr0, %eax + btsl $X86_CR0_PG_BIT, %eax + movl %eax, %cr0 + lret +SYM_FUNC_END(efi_enter32) + + .data + .balign 8 +SYM_DATA_START(efi32_boot_gdt) + .word 0 + .quad 0 +SYM_DATA_END(efi32_boot_gdt) + +SYM_DATA_START(efi32_boot_idt) + .word 0 + .quad 0 +SYM_DATA_END(efi32_boot_idt) + +SYM_DATA_START(efi32_boot_cs) + .word 0 +SYM_DATA_END(efi32_boot_cs) + +SYM_DATA_START(efi32_boot_ds) + .word 0 +SYM_DATA_END(efi32_boot_ds) --- a/arch/x86/boot/compressed/efi_thunk_64.S +++ /dev/null @@ -1,195 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (C) 2014, 2015 Intel Corporation; author Matt Fleming - * - * Early support for invoking 32-bit EFI services from a 64-bit kernel. - * - * Because this thunking occurs before ExitBootServices() we have to - * restore the firmware's 32-bit GDT and IDT before we make EFI service - * calls. - * - * On the plus side, we don't have to worry about mangling 64-bit - * addresses into 32-bits because we're executing with an identity - * mapped pagetable and haven't transitioned to 64-bit virtual addresses - * yet. - */ - -#include <linux/linkage.h> -#include <asm/msr.h> -#include <asm/page_types.h> -#include <asm/processor-flags.h> -#include <asm/segment.h> - - .code64 - .text -SYM_FUNC_START(__efi64_thunk) - push %rbp - push %rbx - - movl %ds, %eax - push %rax - movl %es, %eax - push %rax - movl %ss, %eax - push %rax - - /* Copy args passed on stack */ - movq 0x30(%rsp), %rbp - movq 0x38(%rsp), %rbx - movq 0x40(%rsp), %rax - - /* - * Convert x86-64 ABI params to i386 ABI - */ - subq $64, %rsp - movl %esi, 0x0(%rsp) - movl %edx, 0x4(%rsp) - movl %ecx, 0x8(%rsp) - movl %r8d, 0xc(%rsp) - movl %r9d, 0x10(%rsp) - movl %ebp, 0x14(%rsp) - movl %ebx, 0x18(%rsp) - movl %eax, 0x1c(%rsp) - - leaq 0x20(%rsp), %rbx - sgdt (%rbx) - - addq $16, %rbx - sidt (%rbx) - - leaq 1f(%rip), %rbp - - /* - * Switch to IDT and GDT with 32-bit segments. This is the firmware GDT - * and IDT that was installed when the kernel started executing. The - * pointers were saved at the EFI stub entry point in head_64.S. - * - * Pass the saved DS selector to the 32-bit code, and use far return to - * restore the saved CS selector. - */ - leaq efi32_boot_idt(%rip), %rax - lidt (%rax) - leaq efi32_boot_gdt(%rip), %rax - lgdt (%rax) - - movzwl efi32_boot_ds(%rip), %edx - movzwq efi32_boot_cs(%rip), %rax - pushq %rax - leaq efi_enter32(%rip), %rax - pushq %rax - lretq - -1: addq $64, %rsp - movq %rdi, %rax - - pop %rbx - movl %ebx, %ss - pop %rbx - movl %ebx, %es - pop %rbx - movl %ebx, %ds - /* Clear out 32-bit selector from FS and GS */ - xorl %ebx, %ebx - movl %ebx, %fs - movl %ebx, %gs - - /* - * Convert 32-bit status code into 64-bit. - */ - roll $1, %eax - rorq $1, %rax - - pop %rbx - pop %rbp - RET -SYM_FUNC_END(__efi64_thunk) - - .code32 -/* - * EFI service pointer must be in %edi. - * - * The stack should represent the 32-bit calling convention. - */ -SYM_FUNC_START_LOCAL(efi_enter32) - /* Load firmware selector into data and stack segment registers */ - movl %edx, %ds - movl %edx, %es - movl %edx, %fs - movl %edx, %gs - movl %edx, %ss - - /* Reload pgtables */ - movl %cr3, %eax - movl %eax, %cr3 - - /* Disable paging */ - movl %cr0, %eax - btrl $X86_CR0_PG_BIT, %eax - movl %eax, %cr0 - - /* Disable long mode via EFER */ - movl $MSR_EFER, %ecx - rdmsr - btrl $_EFER_LME, %eax - wrmsr - - call *%edi - - /* We must preserve return value */ - movl %eax, %edi - - /* - * Some firmware will return with interrupts enabled. Be sure to - * disable them before we switch GDTs and IDTs. - */ - cli - - lidtl (%ebx) - subl $16, %ebx - - lgdtl (%ebx) - - movl %cr4, %eax - btsl $(X86_CR4_PAE_BIT), %eax - movl %eax, %cr4 - - movl %cr3, %eax - movl %eax, %cr3 - - movl $MSR_EFER, %ecx - rdmsr - btsl $_EFER_LME, %eax - wrmsr - - xorl %eax, %eax - lldt %ax - - pushl $__KERNEL_CS - pushl %ebp - - /* Enable paging */ - movl %cr0, %eax - btsl $X86_CR0_PG_BIT, %eax - movl %eax, %cr0 - lret -SYM_FUNC_END(efi_enter32) - - .data - .balign 8 -SYM_DATA_START(efi32_boot_gdt) - .word 0 - .quad 0 -SYM_DATA_END(efi32_boot_gdt) - -SYM_DATA_START(efi32_boot_idt) - .word 0 - .quad 0 -SYM_DATA_END(efi32_boot_idt) - -SYM_DATA_START(efi32_boot_cs) - .word 0 -SYM_DATA_END(efi32_boot_cs) - -SYM_DATA_START(efi32_boot_ds) - .word 0 -SYM_DATA_END(efi32_boot_ds)
