3.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx> commit 995ab5189d1d7264e79e665dfa032a19b3ac646e upstream. Under extremely rare conditions, in an MPCore node consisting of at least 3 CPUs, two CPUs trying to perform a STREX to data on the same shared cache line can enter a livelock situation. This patch enables the HW mechanism that overcomes the bug. This fixes the incorrect setup of the STREX backoff delay bit due to a wrong description in the specification. Note that enabling the STREX backoff delay mechanism is done by leaving the bit *cleared*, while the bit was currently being set by the proc-v7.S code. [Thomas: adapt to latest mainline, slightly reword the commit log, add stable markers.] Fixes: de4901933f6d ("arm: mm: Add support for PJ4B cpu and init routines") Signed-off-by: Nadav Haklai <nadavh@xxxxxxxxxxx> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx> Acked-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx> Acked-by: Jason Cooper <jason@xxxxxxxxxxxxxx> Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- arch/arm/mm/proc-v7.S | 2 -- 1 file changed, 2 deletions(-) --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -211,7 +211,6 @@ __v7_pj4b_setup: /* Auxiliary Debug Modes Control 1 Register */ #define PJ4B_STATIC_BP (1 << 2) /* Enable Static BP */ #define PJ4B_INTER_PARITY (1 << 8) /* Disable Internal Parity Handling */ -#define PJ4B_BCK_OFF_STREX (1 << 5) /* Enable the back off of STREX instr */ #define PJ4B_CLEAN_LINE (1 << 16) /* Disable data transfer for clean line */ /* Auxiliary Debug Modes Control 2 Register */ @@ -234,7 +233,6 @@ __v7_pj4b_setup: /* Auxiliary Debug Modes Control 1 Register */ mrc p15, 1, r0, c15, c1, 1 orr r0, r0, #PJ4B_CLEAN_LINE - orr r0, r0, #PJ4B_BCK_OFF_STREX orr r0, r0, #PJ4B_INTER_PARITY bic r0, r0, #PJ4B_STATIC_BP mcr p15, 1, r0, c15, c1, 1 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html