From: Rob Herring <robh@xxxxxxxxxx> [ Upstream commit 704dccec0d490f2ad06f3f16ebed254d81906c3a ] The PCI node interrupt-map properties have the wrong size as #address-cells in the interrupt parent are not accounted for. The dtc interrupt_map check catches this, but the warning is off because its dependency, interrupt_provider, is off by default. Signed-off-by: Rob Herring <robh@xxxxxxxxxx> Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-5-f2dee1292525@xxxxxxxxxx Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 8 ++++---- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 16 ++++++++-------- 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 0b1330b521df4..cf4e501c84bcc 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -759,10 +759,10 @@ pcie0: pci@20000000 { #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interrupt-map = <0 0 0 1 &intc 0 0 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, <&gcc GCC_PCIE0_AXI_M_CLK>, diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 2f275c84e5665..b33145b756ebe 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -806,13 +806,13 @@ pcie1: pci@10000000 { interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 142 + interrupt-map = <0 0 0 1 &intc 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 143 + <0 0 0 2 &intc 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 144 + <0 0 0 3 &intc 0 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 145 + <0 0 0 4 &intc 0 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>, @@ -868,13 +868,13 @@ pcie0: pci@20000000 { interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 75 + interrupt-map = <0 0 0 1 &intc 0 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 78 + <0 0 0 2 &intc 0 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 79 + <0 0 0 3 &intc 0 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 83 + <0 0 0 4 &intc 0 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, -- 2.43.0
