[PATCH 5.15 237/245] i2c: imx: Add timer for handling the stop condition

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Corey Minyard <minyard@xxxxxxx>

[ Upstream commit f89bf95632b41695402996d96476c44c641d23d7 ]

Most IMX I2C interfaces don't generate an interrupt on a stop condition,
so it won't generate a timely stop event on a slave mode transfer.
Some users, like IPMB, need a timely stop event to work properly.

So, add a timer and add the proper handling to generate a stop event in
slave mode if the interface goes idle.

Signed-off-by: Corey Minyard <minyard@xxxxxxx>
Tested-by: Andrew Manley <andrew.manley@xxxxxxxxxxxxxxx>
Reviewed-by: Andrew Manley <andrew.manley@xxxxxxxxxxxxxxx>
Reviewed-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxx>
Stable-dep-of: 87aec499368d ("i2c: imx: when being a target, mark the last read as processed")
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/i2c/busses/i2c-imx.c | 92 ++++++++++++++++++++++++++++--------
 1 file changed, 73 insertions(+), 19 deletions(-)

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 5e8853d3f8da7..d545547c89ca7 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -37,6 +37,8 @@
 #include <linux/io.h>
 #include <linux/iopoll.h>
 #include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/hrtimer.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -51,6 +53,8 @@
 /* This will be the driver name the kernel reports */
 #define DRIVER_NAME "imx-i2c"
 
+#define I2C_IMX_CHECK_DELAY 30000 /* Time to check for bus idle, in NS */
+
 /*
  * Enable DMA if transfer byte size is bigger than this threshold.
  * As the hardware request, it must bigger than 4 bytes.\
@@ -210,6 +214,10 @@ struct imx_i2c_struct {
 	struct imx_i2c_dma	*dma;
 	struct i2c_client	*slave;
 	enum i2c_slave_event last_slave_event;
+
+	/* For checking slave events. */
+	spinlock_t     slave_lock;
+	struct hrtimer slave_timer;
 };
 
 static const struct imx_i2c_hwdata imx1_i2c_hwdata = {
@@ -680,7 +688,7 @@ static void i2c_imx_slave_event(struct imx_i2c_struct *i2c_imx,
 
 static void i2c_imx_slave_finish_op(struct imx_i2c_struct *i2c_imx)
 {
-	u8 val;
+	u8 val = 0;
 
 	while (i2c_imx->last_slave_event != I2C_SLAVE_STOP) {
 		switch (i2c_imx->last_slave_event) {
@@ -701,10 +709,11 @@ static void i2c_imx_slave_finish_op(struct imx_i2c_struct *i2c_imx)
 	}
 }
 
-static irqreturn_t i2c_imx_slave_isr(struct imx_i2c_struct *i2c_imx,
-				     unsigned int status, unsigned int ctl)
+/* Returns true if the timer should be restarted, false if not. */
+static irqreturn_t i2c_imx_slave_handle(struct imx_i2c_struct *i2c_imx,
+					unsigned int status, unsigned int ctl)
 {
-	u8 value;
+	u8 value = 0;
 
 	if (status & I2SR_IAL) { /* Arbitration lost */
 		i2c_imx_clear_irq(i2c_imx, I2SR_IAL);
@@ -712,6 +721,16 @@ static irqreturn_t i2c_imx_slave_isr(struct imx_i2c_struct *i2c_imx,
 			return IRQ_HANDLED;
 	}
 
+	if (!(status & I2SR_IBB)) {
+		/* No master on the bus, that could mean a stop condition. */
+		i2c_imx_slave_finish_op(i2c_imx);
+		return IRQ_HANDLED;
+	}
+
+	if (!(status & I2SR_ICF))
+		/* Data transfer still in progress, ignore this. */
+		goto out;
+
 	if (status & I2SR_IAAS) { /* Addressed as a slave */
 		i2c_imx_slave_finish_op(i2c_imx);
 		if (status & I2SR_SRW) { /* Master wants to read from us*/
@@ -737,16 +756,9 @@ static irqreturn_t i2c_imx_slave_isr(struct imx_i2c_struct *i2c_imx,
 			imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
 		}
 	} else if (!(ctl & I2CR_MTX)) { /* Receive mode */
-		if (status & I2SR_IBB) { /* No STOP signal detected */
-			value = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
-			i2c_imx_slave_event(i2c_imx,
-					    I2C_SLAVE_WRITE_RECEIVED, &value);
-		} else { /* STOP signal is detected */
-			dev_dbg(&i2c_imx->adapter.dev,
-				"STOP signal detected");
-			i2c_imx_slave_event(i2c_imx,
-					    I2C_SLAVE_STOP, &value);
-		}
+		value = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
+		i2c_imx_slave_event(i2c_imx,
+				    I2C_SLAVE_WRITE_RECEIVED, &value);
 	} else if (!(status & I2SR_RXAK)) { /* Transmit mode received ACK */
 		ctl |= I2CR_MTX;
 		imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
@@ -755,15 +767,43 @@ static irqreturn_t i2c_imx_slave_isr(struct imx_i2c_struct *i2c_imx,
 				    I2C_SLAVE_READ_PROCESSED, &value);
 
 		imx_i2c_write_reg(value, i2c_imx, IMX_I2C_I2DR);
-	} else { /* Transmit mode received NAK */
+	} else { /* Transmit mode received NAK, operation is done */
 		ctl &= ~I2CR_MTX;
 		imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
 		imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
+		i2c_imx_slave_finish_op(i2c_imx);
+		return IRQ_HANDLED;
 	}
 
+out:
+	/*
+	 * No need to check the return value here.  If it returns 0 or
+	 * 1, then everything is fine.  If it returns -1, then the
+	 * timer is running in the handler.  This will still work,
+	 * though it may be redone (or already have been done) by the
+	 * timer function.
+	 */
+	hrtimer_try_to_cancel(&i2c_imx->slave_timer);
+	hrtimer_forward_now(&i2c_imx->slave_timer, I2C_IMX_CHECK_DELAY);
+	hrtimer_restart(&i2c_imx->slave_timer);
 	return IRQ_HANDLED;
 }
 
+static enum hrtimer_restart i2c_imx_slave_timeout(struct hrtimer *t)
+{
+	struct imx_i2c_struct *i2c_imx = container_of(t, struct imx_i2c_struct,
+						      slave_timer);
+	unsigned int ctl, status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&i2c_imx->slave_lock, flags);
+	status = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
+	ctl = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+	i2c_imx_slave_handle(i2c_imx, status, ctl);
+	spin_unlock_irqrestore(&i2c_imx->slave_lock, flags);
+	return HRTIMER_NORESTART;
+}
+
 static void i2c_imx_slave_init(struct imx_i2c_struct *i2c_imx)
 {
 	int temp;
@@ -843,7 +883,9 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
 {
 	struct imx_i2c_struct *i2c_imx = dev_id;
 	unsigned int ctl, status;
+	unsigned long flags;
 
+	spin_lock_irqsave(&i2c_imx->slave_lock, flags);
 	status = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
 	ctl = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
 
@@ -851,14 +893,20 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
 		i2c_imx_clear_irq(i2c_imx, I2SR_IIF);
 		if (i2c_imx->slave) {
 			if (!(ctl & I2CR_MSTA)) {
-				return i2c_imx_slave_isr(i2c_imx, status, ctl);
-			} else if (i2c_imx->last_slave_event !=
-				   I2C_SLAVE_STOP) {
-				i2c_imx_slave_finish_op(i2c_imx);
+				irqreturn_t ret;
+
+				ret = i2c_imx_slave_handle(i2c_imx,
+							   status, ctl);
+				spin_unlock_irqrestore(&i2c_imx->slave_lock,
+						       flags);
+				return ret;
 			}
+			i2c_imx_slave_finish_op(i2c_imx);
 		}
+		spin_unlock_irqrestore(&i2c_imx->slave_lock, flags);
 		return i2c_imx_master_isr(i2c_imx, status);
 	}
+	spin_unlock_irqrestore(&i2c_imx->slave_lock, flags);
 
 	return IRQ_NONE;
 }
@@ -1380,6 +1428,10 @@ static int i2c_imx_probe(struct platform_device *pdev)
 	if (!i2c_imx)
 		return -ENOMEM;
 
+	spin_lock_init(&i2c_imx->slave_lock);
+	hrtimer_init(&i2c_imx->slave_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+	i2c_imx->slave_timer.function = i2c_imx_slave_timeout;
+
 	match = device_get_match_data(&pdev->dev);
 	if (match)
 		i2c_imx->hwdata = match;
@@ -1491,6 +1543,8 @@ static int i2c_imx_remove(struct platform_device *pdev)
 
 	ret = pm_runtime_get_sync(&pdev->dev);
 
+	hrtimer_cancel(&i2c_imx->slave_timer);
+
 	/* remove adapter */
 	dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
 	i2c_del_adapter(&i2c_imx->adapter);
-- 
2.43.0







[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux