The AMD USB host controller (1022:43f7) does not enter PCI D3 by default
when nothing is connected. This is due to the policy introduced by
'commit a611bf473d1f ("xhci-pci: Set runtime PM as default policy on all
xHC 1.2 or later devices")', which only covers 1.2 or later devices.
Therefore, by default, allow RPM on the AMD USB controller [1022:43f7].
Fixes: 4baf12181509 ("xhci: Loosen RPM as default policy to cover for AMD xHC 1.1")
Link: https://lore.kernel.org/all/12335218.O9o76ZdvQC@xxxxxxxxxxxxxx/
Cc: Mario Limonciello <mario.limonciello@xxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Tested-by: Oleksandr Natalenko <oleksandr@xxxxxxxxxxxxxx>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
---
Changes in v2:
- Added Cc: stable@xxxxxxxxxxxxxxx
drivers/usb/host/xhci-pci.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index b534ca9752be..1eb7a41a75d7 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -473,6 +473,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
/* xHC spec requires PCI devices to support D3hot and D3cold */
if (xhci->hci_version >= 0x120)
xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
+ else if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x43f7)
+ xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
if (xhci->quirks & XHCI_RESET_ON_RESUME)
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
--
2.25.1
