Hi Greg
On Mon, Feb 26, 2024 at 11:14 AM Greg Kroah-Hartman
<gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
>
> On Mon, Feb 26, 2024 at 11:05:02AM +0100, Michael Trimarchi wrote:
> > This patch avoid to disconnect an already gadget in not connected state
> >
> > [ 45.597274] dwc3 31000000.usb: wait for SETUP phase timed out
> > [ 45.599140] dwc3 31000000.usb: failed to set STALL on ep0out
> > [ 45.601069] ------------[ cut here ]------------
> > [ 45.601073] WARNING: CPU: 0 PID: 150 at drivers/usb/dwc3/ep0.c:289 dwc3_ep0_out_start+0xcc/0xd4
> > [ 45.601102] Modules linked in: cfg80211 rfkill ipv6 rpmsg_ctrl rpmsg_char crct10dif_ce rti_wdt k3_j72xx_bandgap rtc_ti_k3 omap_mailbox sa2ul authenc [last unloaded: ti_k3_r5_remoteproc]
> > [ 45.601151] CPU: 0 PID: 150 Comm: sh Not tainted 6.8.0-rc5 #1
> > [ 45.601159] Hardware name: BSH - CCM-M3 (DT)
> > [ 45.601164] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> > [ 45.601172] pc : dwc3_ep0_out_start+0xcc/0xd4
> > [ 45.601179] lr : dwc3_ep0_out_start+0x50/0xd4
> > [ 45.601186] sp : ffff8000832739e0
> > [ 45.601189] x29: ffff8000832739e0 x28: ffff800082a21000 x27: ffff8000808dc630
> > [ 45.601200] x26: 0000000000000002 x25: ffff800082530a44 x24: 0000000000000000
> > [ 45.601210] x23: ffff000000e079a0 x22: ffff000000e07a68 x21: 0000000000000001
> > [ 45.601219] x20: ffff000000e07880 x19: ffff000000e07880 x18: 0000000000000040
> > [ 45.601229] x17: ffff7fff8e1ce000 x16: ffff800080000000 x15: fffffffffffe5260
> > [ 45.601239] x14: 0000000000000000 x13: 206e6f204c4c4154 x12: 5320746573206f74
> > [ 45.601249] x11: 0000000000000001 x10: 000000000000000a x9 : ffff800083273930
> > [ 45.601259] x8 : 000000000000000a x7 : ffffffffffff3f0c x6 : ffffffffffff3f00
> > [ 45.601268] x5 : ffffffffffff3f0c x4 : 0000000000000000 x3 : 0000000000000000
> > [ 45.601278] x2 : 0000000000000000 x1 : ffff000004e7e600 x0 : 00000000ffffff92
> > [ 45.601289] Call trace:
> > [ 45.601293] dwc3_ep0_out_start+0xcc/0xd4
> > [ 45.601301] dwc3_ep0_stall_and_restart+0x98/0xbc
> > [ 45.601309] dwc3_ep0_reset_state+0x5c/0x88
> > [ 45.601315] dwc3_gadget_soft_disconnect+0x144/0x160
> > [ 45.601323] dwc3_gadget_suspend+0x18/0xb0
> > [ 45.601329] dwc3_suspend_common+0x5c/0x18c
> > [ 45.601341] dwc3_suspend+0x20/0x44
> > [ 45.601350] platform_pm_suspend+0x2c/0x6c
> > [ 45.601360] __device_suspend+0x10c/0x34c
> > [ 45.601372] dpm_suspend+0x1a8/0x240
> > [ 45.601382] dpm_suspend_start+0x80/0x9c
> > [ 45.601391] suspend_devices_and_enter+0x1c4/0x584
> > [ 45.601402] pm_suspend+0x1b0/0x264
> > [ 45.601408] state_store+0x80/0xec
> > [ 45.601415] kobj_attr_store+0x18/0x2c
> > [ 45.601426] sysfs_kf_write+0x44/0x54
> > [ 45.601434] kernfs_fop_write_iter+0x120/0x1ec
> > [ 45.601445] vfs_write+0x23c/0x358
> > [ 45.601458] ksys_write+0x70/0x104
> > [ 45.601467] __arm64_sys_write+0x1c/0x28
> > [ 45.601477] invoke_syscall+0x48/0x114
> > [ 45.601488] el0_svc_common.constprop.0+0x40/0xe0
> > [ 45.601498] do_el0_svc+0x1c/0x28
> > [ 45.601506] el0_svc+0x34/0xb8
> > [ 45.601516] el0t_64_sync_handler+0x100/0x12c
> > [ 45.601522] el0t_64_sync+0x190/0x194
> > [ 45.601531] ---[ end trace 0000000000000000 ]---
> > [ 45.608794] Disabling non-boot CPUs ...
> > [ 45.611029] psci: CPU1 killed (polled 0 ms)
> > [ 45.611837] Enabling non-boot CPUs ...
> > [ 45.612247] Detected VIPT I-cache on CPU1
> >
> > Tested on a am62x board with a usbnet gadget
> >
> > Fixes: 61a348857e86 ("usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend)
> > Cc: stable@xxxxxxxxxxxxxxx
> > Signed-off-by: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
> > ---
> > V2->V3:
> > - Change the logic of the patch using the gadget connected state
> > - Change of the commit message
> > V1->V2:
> > - Add stable in CC
> > ---
> > drivers/usb/dwc3/gadget.c | 9 +++++++++
> > 1 file changed, 9 insertions(+)
> >
> > diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> > index 4c8dd6724678..a7316a1703ad 100644
> > --- a/drivers/usb/dwc3/gadget.c
> > +++ b/drivers/usb/dwc3/gadget.c
> > @@ -2650,6 +2650,15 @@ static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc)
> > int ret;
> >
> > spin_lock_irqsave(&dwc->lock, flags);
> > + /*
> > + * Attempt to disconnect a no connected gadget
>
> What does this mean? And why a 3 line comment?
>
> > + */
> > + if (!dwc->connected) {
> > + dev_warn(dwc->dev, "No connected device\n");
>
> You are printing while a spinlock is held? What can userspace do with
> this message?
I will drop it.
>
> > + spin_unlock_irqrestore(&dwc->lock, flags);
> > + return 0;
>
> No error handling? Why not?
The function tries to disconnect an already disconnected gadget, so in
this case is a nop. If we want to handle
an error I can check the impact on the dwc3 gadget.
Michael
>
> thanks,
>
> greg k-h
--
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
michael@xxxxxxxxxxxxxxxxxxxx
__________________________________
Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
info@xxxxxxxxxxxxxxxxxxxx
www.amarulasolutions.com
