Re: [PATCH] virtio_blk: Fix device surprise removal

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 22, 2024 at 10:23:28AM -0500, Stefan Hajnoczi wrote:
> On Thu, Feb 22, 2024 at 04:46:38AM +0000, Parav Pandit wrote:
> > 
> > 
> > > From: Stefan Hajnoczi <stefanha@xxxxxxxxxx>
> > > Sent: Wednesday, February 21, 2024 3:35 AM
> > > To: Parav Pandit <parav@xxxxxxxxxx>
> > > 
> > > On Sat, Feb 17, 2024 at 08:08:48PM +0200, Parav Pandit wrote:
> > > > When the PCI device is surprise removed, requests won't complete from
> > > > the device. These IOs are never completed and disk deletion hangs
> > > > indefinitely.
> > > >
> > > > Fix it by aborting the IOs which the device will never complete when
> > > > the VQ is broken.
> > > >
> > > > With this fix now fio completes swiftly.
> > > > An alternative of IO timeout has been considered, however when the
> > > > driver knows about unresponsive block device, swiftly clearing them
> > > > enables users and upper layers to react quickly.
> > > >
> > > > Verified with multiple device unplug cycles with pending IOs in virtio
> > > > used ring and some pending with device.
> > > >
> > > > In future instead of VQ broken, a more elegant method can be used. At
> > > > the moment the patch is kept to its minimal changes given its urgency
> > > > to fix broken kernels.
> > > >
> > > > Fixes: 43bb40c5b926 ("virtio_pci: Support surprise removal of virtio
> > > > pci device")
> > > > Cc: stable@xxxxxxxxxxxxxxx
> > > > Reported-by: lirongqing@xxxxxxxxx
> > > > Closes:
> > > > https://lore.kernel.org/virtualization/c45dd68698cd47238c55fb73ca9b474
> > > > 1@xxxxxxxxx/
> > > > Co-developed-by: Chaitanya Kulkarni <kch@xxxxxxxxxx>
> > > > Signed-off-by: Chaitanya Kulkarni <kch@xxxxxxxxxx>
> > > > Signed-off-by: Parav Pandit <parav@xxxxxxxxxx>
> > > > ---
> > > >  drivers/block/virtio_blk.c | 54
> > > > ++++++++++++++++++++++++++++++++++++++
> > > >  1 file changed, 54 insertions(+)
> > > >
> > > > diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
> > > > index 2bf14a0e2815..59b49899b229 100644
> > > > --- a/drivers/block/virtio_blk.c
> > > > +++ b/drivers/block/virtio_blk.c
> > > > @@ -1562,10 +1562,64 @@ static int virtblk_probe(struct virtio_device
> > > *vdev)
> > > >  	return err;
> > > >  }
> > > >
> > > > +static bool virtblk_cancel_request(struct request *rq, void *data) {
> > > > +	struct virtblk_req *vbr = blk_mq_rq_to_pdu(rq);
> > > > +
> > > > +	vbr->in_hdr.status = VIRTIO_BLK_S_IOERR;
> > > > +	if (blk_mq_request_started(rq) && !blk_mq_request_completed(rq))
> > > > +		blk_mq_complete_request(rq);
> > > > +
> > > > +	return true;
> > > > +}
> > > > +
> > > > +static void virtblk_cleanup_reqs(struct virtio_blk *vblk) {
> > > > +	struct virtio_blk_vq *blk_vq;
> > > > +	struct request_queue *q;
> > > > +	struct virtqueue *vq;
> > > > +	unsigned long flags;
> > > > +	int i;
> > > > +
> > > > +	vq = vblk->vqs[0].vq;
> > > > +	if (!virtqueue_is_broken(vq))
> > > > +		return;
> > > > +
> > > > +	q = vblk->disk->queue;
> > > > +	/* Block upper layer to not get any new requests */
> > > > +	blk_mq_quiesce_queue(q);
> > > > +
> > > > +	for (i = 0; i < vblk->num_vqs; i++) {
> > > > +		blk_vq = &vblk->vqs[i];
> > > > +
> > > > +		/* Synchronize with any ongoing virtblk_poll() which may be
> > > > +		 * completing the requests to uppper layer which has already
> > > > +		 * crossed the broken vq check.
> > > > +		 */
> > > > +		spin_lock_irqsave(&blk_vq->lock, flags);
> > > > +		spin_unlock_irqrestore(&blk_vq->lock, flags);
> > > > +	}
> > > > +
> > > > +	blk_sync_queue(q);
> > > > +
> > > > +	/* Complete remaining pending requests with error */
> > > > +	blk_mq_tagset_busy_iter(&vblk->tag_set, virtblk_cancel_request,
> > > > +vblk);
> > > 
> > > Interrupts can still occur here. What prevents the race between
> > > virtblk_cancel_request() and virtblk_request_done()?
> > >
> > The PCI device which generates the interrupt is already removed so interrupt shouldn't arrive when executing cancel_request.
> > (This is ignoring the race that Ming pointed out. I am preparing the v1 that eliminates such condition.)
> > 
> > If there was ongoing virtblk_request_done() is synchronized by the for loop above.
> 
> Ah, I see now that:
> 
> +if (!virtqueue_is_broken(vq))
> +    return;
> 
> relates to:
> 
> static void virtio_pci_remove(struct pci_dev *pci_dev)
> {
> 	struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
> 	struct device *dev = get_device(&vp_dev->vdev.dev);
> 
> 	/*
> 	 * Device is marked broken on surprise removal so that virtio upper
> 	 * layers can abort any ongoing operation.
> 	 */
> 	if (!pci_device_is_present(pci_dev))
> 		virtio_break_device(&vp_dev->vdev);

It's not 100% reliable though. We did it opportunistically but if you
suddenly want to rely on it then you need to also synchronize
callbacks.

> Please rename virtblk_cleanup_reqs() to virtblk_cleanup_broken_device()
> or similar so it's clear that this function only applies when the device
> is broken? For example, it won't handle ACPI hot unplug requests because
> the device will still be present.
> 
> Thanks,
> Stefan
> 
> > 
> >  
> > > > +	blk_mq_tagset_wait_completed_request(&vblk->tag_set);
> > > > +
> > > > +	/*
> > > > +	 * Unblock any pending dispatch I/Os before we destroy device. From
> > > > +	 * del_gendisk() -> __blk_mark_disk_dead(disk) will set GD_DEAD
> > > flag,
> > > > +	 * that will make sure any new I/O from bio_queue_enter() to fail.
> > > > +	 */
> > > > +	blk_mq_unquiesce_queue(q);
> > > > +}
> > > > +
> > > >  static void virtblk_remove(struct virtio_device *vdev)  {
> > > >  	struct virtio_blk *vblk = vdev->priv;
> > > >
> > > > +	virtblk_cleanup_reqs(vblk);
> > > > +
> > > >  	/* Make sure no work handler is accessing the device. */
> > > >  	flush_work(&vblk->config_work);
> > > >
> > > > --
> > > > 2.34.1
> > > >
> > 






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux