Caused by a copy & paste error. Note that even with this bug AM437x SK display still works because GPIO mux mode is always enabled. It's still wrong to mux somebody else's pin. Luckily ball D25 (offset 0x238 - gpio5_8) on AM437x isn't used for anything. While at that, also replace a pullup with a pulldown as that gpio should be normally low, not high. Cc: <stable@xxxxxxxxxxxxxxx> # v3.17+ Acked-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx> Signed-off-by: Felipe Balbi <balbi@xxxxxx> --- arch/arm/boot/dts/am437x-sk-evm.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index f7f77a7..0eceb8a 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -320,8 +320,7 @@ lcd_pins: lcd_pins { pinctrl-single,pins = < - /* GPIO 5_8 to select LCD / HDMI */ - 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) + 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */ >; }; }; -- 2.1.0.GIT -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html