5.15-stable review patch. If anyone has any objections, please let me know. ------------------ From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx> [ Upstream commit 8f40fc0808137c157dd408d2632e63bfca2aecdb ] Several sequences utilize the same routine for forcing the control endpoint back into the SETUP phase. This is required, because those operations need to ensure that EP0 is back in the default state. Acked-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx> Signed-off-by: Wesley Cheng <quic_wcheng@xxxxxxxxxxx> Link: https://lore.kernel.org/r/20230420212759.29429-3-quic_wcheng@xxxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Stable-dep-of: 730e12fbec53 ("usb: dwc3: gadget: Handle EP0 request dequeuing properly") Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/usb/dwc3/gadget.c | 53 ++++++++++++++++----------------------- 1 file changed, 21 insertions(+), 32 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index a74ac44c6cd8..7704e2444b4b 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -139,6 +139,24 @@ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state) return -ETIMEDOUT; } +static void dwc3_ep0_reset_state(struct dwc3 *dwc) +{ + unsigned int dir; + + if (dwc->ep0state != EP0_SETUP_PHASE) { + dir = !!dwc->ep0_expect_in; + if (dwc->ep0state == EP0_DATA_PHASE) + dwc3_ep0_end_control_data(dwc, dwc->eps[dir]); + else + dwc3_ep0_end_control_data(dwc, dwc->eps[!dir]); + + dwc->eps[0]->trb_enqueue = 0; + dwc->eps[1]->trb_enqueue = 0; + + dwc3_ep0_stall_and_restart(dwc); + } +} + /** * dwc3_ep_inc_trb - increment a trb index. * @index: Pointer to the TRB index to increment. @@ -2495,16 +2513,9 @@ static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc) ret = wait_for_completion_timeout(&dwc->ep0_in_setup, msecs_to_jiffies(DWC3_PULL_UP_TIMEOUT)); if (ret == 0) { - unsigned int dir; - dev_warn(dwc->dev, "wait for SETUP phase timed out\n"); spin_lock_irqsave(&dwc->lock, flags); - dir = !!dwc->ep0_expect_in; - if (dwc->ep0state == EP0_DATA_PHASE) - dwc3_ep0_end_control_data(dwc, dwc->eps[dir]); - else - dwc3_ep0_end_control_data(dwc, dwc->eps[!dir]); - dwc3_ep0_stall_and_restart(dwc); + dwc3_ep0_reset_state(dwc); spin_unlock_irqrestore(&dwc->lock, flags); } } @@ -3762,16 +3773,7 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc) dwc->setup_packet_pending = false; usb_gadget_set_state(dwc->gadget, USB_STATE_NOTATTACHED); - if (dwc->ep0state != EP0_SETUP_PHASE) { - unsigned int dir; - - dir = !!dwc->ep0_expect_in; - if (dwc->ep0state == EP0_DATA_PHASE) - dwc3_ep0_end_control_data(dwc, dwc->eps[dir]); - else - dwc3_ep0_end_control_data(dwc, dwc->eps[!dir]); - dwc3_ep0_stall_and_restart(dwc); - } + dwc3_ep0_reset_state(dwc); } static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) @@ -3827,20 +3829,7 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) * phase. So ensure that EP0 is in setup phase by issuing a stall * and restart if EP0 is not in setup phase. */ - if (dwc->ep0state != EP0_SETUP_PHASE) { - unsigned int dir; - - dir = !!dwc->ep0_expect_in; - if (dwc->ep0state == EP0_DATA_PHASE) - dwc3_ep0_end_control_data(dwc, dwc->eps[dir]); - else - dwc3_ep0_end_control_data(dwc, dwc->eps[!dir]); - - dwc->eps[0]->trb_enqueue = 0; - dwc->eps[1]->trb_enqueue = 0; - - dwc3_ep0_stall_and_restart(dwc); - } + dwc3_ep0_reset_state(dwc); /* * In the Synopsis DesignWare Cores USB3 Databook Rev. 3.30a -- 2.43.0
