5.15-stable review patch. If anyone has any objections, please let me know. ------------------ From: Werner Fischer <devlists@xxxxxxxx> [ Upstream commit d12971849d71781c1e4ffd1117d4878ce233d319 ] WDTCTRL bit 3 sets the mode choice for the clock input of IT8784/IT8786. Some motherboards require this bit to be set to 1 (= PCICLK mode), otherwise the watchdog functionality gets broken. The BIOS of those motherboards sets WDTCTRL bit 3 already to 1. Instead of setting all bits of WDTCTRL to 0 by writing 0x00 to it, keep bit 3 of it unchanged for IT8784/IT8786 chips. In this way, bit 3 keeps the status as set by the BIOS of the motherboard. Watchdog tests have been successful with this patch with the following systems: IT8784: Thomas-Krenn LES plus v2 (YANLING YL-KBRL2 V2) IT8786: Thomas-Krenn LES plus v3 (YANLING YL-CLU L2) IT8786: Thomas-Krenn LES network 6L v2 (YANLING YL-CLU6L) Link: https://lore.kernel.org/all/140b264d-341f-465b-8715-dacfe84b3f71@xxxxxxxxxxxx/ Signed-off-by: Werner Fischer <devlists@xxxxxxxx> Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx> Link: https://lore.kernel.org/r/20231213094525.11849-4-devlists@xxxxxxxx Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/watchdog/it87_wdt.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/watchdog/it87_wdt.c b/drivers/watchdog/it87_wdt.c index bb1122909396..843f9f8e3917 100644 --- a/drivers/watchdog/it87_wdt.c +++ b/drivers/watchdog/it87_wdt.c @@ -255,6 +255,7 @@ static struct watchdog_device wdt_dev = { static int __init it87_wdt_init(void) { u8 chip_rev; + u8 ctrl; int rc; rc = superio_enter(); @@ -313,7 +314,18 @@ static int __init it87_wdt_init(void) superio_select(GPIO); superio_outb(WDT_TOV1, WDTCFG); - superio_outb(0x00, WDTCTRL); + + switch (chip_type) { + case IT8784_ID: + case IT8786_ID: + ctrl = superio_inb(WDTCTRL); + ctrl &= 0x08; + superio_outb(ctrl, WDTCTRL); + break; + default: + superio_outb(0x00, WDTCTRL); + } + superio_exit(); if (timeout < 1 || timeout > max_units * 60) { -- 2.43.0