Applied to drm-misc-fixes On 20.02.2024 14:16, Jacek Lawrynowicz wrote: > From: Andrzej Kacprowski <Andrzej.Kacprowski@xxxxxxxxx> > > There is no point in requesting 1 tile on VPU40xx as the FW will > probably need more tiles to run workloads, so it will have to > reconfigure PLL anyway. Don't enable any tiles and allow the FW to > perform initial tile configuration. > > This improves NPU boot stability as the tiles are always enabled only > by the FW from the same initial state. > > Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4") > Cc: stable@xxxxxxxxxxxxxxx > Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@xxxxxxxxx> > Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@xxxxxxxxxxxxxxx> > --- > drivers/accel/ivpu/ivpu_hw_40xx.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/accel/ivpu/ivpu_hw_40xx.c b/drivers/accel/ivpu/ivpu_hw_40xx.c > index 1c995307c113..a1523d0b1ef3 100644 > --- a/drivers/accel/ivpu/ivpu_hw_40xx.c > +++ b/drivers/accel/ivpu/ivpu_hw_40xx.c > @@ -24,7 +24,7 @@ > #define SKU_HW_ID_SHIFT 16u > #define SKU_HW_ID_MASK 0xffff0000u > > -#define PLL_CONFIG_DEFAULT 0x1 > +#define PLL_CONFIG_DEFAULT 0x0 > #define PLL_CDYN_DEFAULT 0x80 > #define PLL_EPP_DEFAULT 0x80 > #define PLL_REF_CLK_FREQ (50 * 1000000)