From: Yang Xiwen <forbidden405@xxxxxxxxxxx> During boot, Linux kernel complains: [ 0.000000] GIC: GICv2 detected, but range too small and irqchip.gicv2_force_probe not set This SoC is using a regular GIC-400 and the GICR space size should be 8KB rather than 256B. With this patch: [ 0.000000] GIC: Using split EOI/Deactivate mode So this should be the correct fix. Fixes: 2f20182ed670 ("arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board") Signed-off-by: Yang Xiwen <forbidden405@xxxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx --- arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi index ed1b5a7a6067..d01023401d7e 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi @@ -58,7 +58,7 @@ cpu@3 { gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; reg = <0x0 0xf1001000 0x0 0x1000>, /* GICD */ - <0x0 0xf1002000 0x0 0x100>; /* GICC */ + <0x0 0xf1002000 0x0 0x2000>; /* GICC */ #address-cells = <0>; #interrupt-cells = <3>; interrupt-controller; -- 2.43.0