6.7-stable review patch. If anyone has any objections, please let me know. ------------------ From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> [ Upstream commit 0e4688cd4ee6efbeae2b31f75e16961fd7f72735 ] Change PM8018 node labels to start with pm8018_ prefix, following other Qualcomm PMIC device nodes. Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> Link: https://lore.kernel.org/r/20230928110309.1212221-10-dmitry.baryshkov@xxxxxxxxxx Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi | 2 +- arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi | 14 +++++++------- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi index 92c8003dac25..dac3aa793f71 100644 --- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi @@ -76,7 +76,7 @@ }; }; -&pmicgpio { +&pm8018_gpio { usb_vbus_5v_pins: usb-vbus-5v-state { pins = "gpio4"; function = "normal"; diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi index 63e21aa23642..c0a60bae703b 100644 --- a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi @@ -261,7 +261,7 @@ reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - pmicintc: pmic { + pm8018: pmic { compatible = "qcom,pm8018", "qcom,pm8921"; interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; @@ -272,38 +272,38 @@ pwrkey@1c { compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey"; reg = <0x1c>; - interrupt-parent = <&pmicintc>; + interrupt-parent = <&pm8018>; interrupts = <50 IRQ_TYPE_EDGE_RISING>, <51 IRQ_TYPE_EDGE_RISING>; debounce = <15625>; pull-up; }; - pmicmpp: mpps@50 { + pm8018_mpps: mpps@50 { compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp"; interrupt-controller; #interrupt-cells = <2>; reg = <0x50>; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pmicmpp 0 0 6>; + gpio-ranges = <&pm8018_mpps 0 0 6>; }; rtc@11d { compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc"; - interrupt-parent = <&pmicintc>; + interrupt-parent = <&pm8018>; interrupts = <39 IRQ_TYPE_EDGE_RISING>; reg = <0x11d>; allow-set-time; }; - pmicgpio: gpio@150 { + pm8018_gpio: gpio@150 { compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio"; reg = <0x150>; interrupt-controller; #interrupt-cells = <2>; gpio-controller; - gpio-ranges = <&pmicgpio 0 0 6>; + gpio-ranges = <&pm8018_gpio 0 0 6>; #gpio-cells = <2>; }; }; -- 2.43.0
