Hi Sasha,
Support for the rv1126 SoC was only added around linux 6.2 and 6.3,
thus doesnt make sense to pick this patch up in 6.1
Regards
Tim
On 1/29/24 03:14, Sasha Levin wrote:
From: Tim Lunn <tim@xxxxxxxxxxxxxx>
[ Upstream commit 92a85b7c6262f19c65a1c115cf15f411ba65a57c ]
Rockchip RV1126 is using old style i2c controller, the i2c2
bus uses a non-sequential offset in the grf register for the
mask/value bits for this bus.
This patch fixes i2c2 bus on rv1126 SoCs.
Signed-off-by: Tim Lunn <tim@xxxxxxxxxxxxxx>
Acked-by: Heiko Stuebner <heiko@xxxxxxxxx>
Reviewed-by: Andi Shyti <andi.shyti@xxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-rk3x.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 6aa4f1f06240..c8cd5cadcf56 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -1295,8 +1295,12 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
return -EINVAL;
}
- /* 27+i: write mask, 11+i: value */
- value = BIT(27 + bus_nr) | BIT(11 + bus_nr);
+ /* rv1126 i2c2 uses non-sequential write mask 20, value 4 */
+ if (i2c->soc_data == &rv1126_soc_data && bus_nr == 2)
+ value = BIT(20) | BIT(4);
+ else
+ /* 27+i: write mask, 11+i: value */
+ value = BIT(27 + bus_nr) | BIT(11 + bus_nr);
ret = regmap_write(grf, i2c->soc_data->grf_offset, value);
if (ret != 0) {
