From: Ming Lei <ming.lei@xxxxxxxxxx> [ Upstream commit 5266caaf5660529e3da53004b8b7174cab6374ed ] In blk_mq_mark_tag_wait(), __add_wait_queue() may be re-ordered with the following blk_mq_get_driver_tag() in case of getting driver tag failure. Then in __sbitmap_queue_wake_up(), waitqueue_active() may not observe the added waiter in blk_mq_mark_tag_wait() and wake up nothing, meantime blk_mq_mark_tag_wait() can't get driver tag successfully. This issue can be reproduced by running the following test in loop, and fio hang can be observed in < 30min when running it on my test VM in laptop. modprobe -r scsi_debug modprobe scsi_debug delay=0 dev_size_mb=4096 max_queue=1 host_max_queue=1 submit_queues=4 dev=`ls -d /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/* | head -1 | xargs basename` fio --filename=/dev/"$dev" --direct=1 --rw=randrw --bs=4k --iodepth=1 \ --runtime=100 --numjobs=40 --time_based --name=test \ --ioengine=libaio Fix the issue by adding one explicit barrier in blk_mq_mark_tag_wait(), which is just fine in case of running out of tag. Cc: Jan Kara <jack@xxxxxxx> Cc: Kemeng Shi <shikemeng@xxxxxxxxxxxxxxx> Reported-by: Changhui Zhong <czhong@xxxxxxxxxx> Signed-off-by: Ming Lei <ming.lei@xxxxxxxxxx> Link: https://lore.kernel.org/r/20240112122626.4181044-1-ming.lei@xxxxxxxxxx Signed-off-by: Jens Axboe <axboe@xxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- block/blk-mq.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/block/blk-mq.c b/block/blk-mq.c index ac18f802c027..9171f3f201ce 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -1858,6 +1858,22 @@ static bool blk_mq_mark_tag_wait(struct blk_mq_hw_ctx *hctx, wait->flags &= ~WQ_FLAG_EXCLUSIVE; __add_wait_queue(wq, wait); + /* + * Add one explicit barrier since blk_mq_get_driver_tag() may + * not imply barrier in case of failure. + * + * Order adding us to wait queue and allocating driver tag. + * + * The pair is the one implied in sbitmap_queue_wake_up() which + * orders clearing sbitmap tag bits and waitqueue_active() in + * __sbitmap_queue_wake_up(), since waitqueue_active() is lockless + * + * Otherwise, re-order of adding wait queue and getting driver tag + * may cause __sbitmap_queue_wake_up() to wake up nothing because + * the waitqueue_active() may not observe us in wait queue. + */ + smp_mb(); + /* * It's possible that a tag was freed in the window between the * allocation failure and adding the hardware queue to the wait -- 2.43.0