FAILED: patch "[PATCH] thermal: gov_power_allocator: avoid inability to reset a cdev" failed to apply to 5.15-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x e95fa7404716f6e25021e66067271a4ad8eb1486
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@xxxxxxxxxxxxxxx>' --in-reply-to '2024012650-unfrozen-jukebox-4be8@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..

Possible dependencies:

e95fa7404716 ("thermal: gov_power_allocator: avoid inability to reset a cdev")
94be1d27aa8d ("thermal: gov_power_allocator: Use trip pointers instead of trip indices")
2c7b4bfadef0 ("thermal: core: Store trip pointer in struct thermal_instance")
790930f44289 ("thermal: core: Introduce thermal_cooling_device_update()")
c43198af05cf ("thermal: core: Introduce thermal_cooling_device_present()")
5b8de18ee902 ("thermal/core: Move the thermal trip code to a dedicated file")
e6ec64f85237 ("thermal/drivers/qcom: Fix set_trip_temp() deadlock")
1fa86b0a3692 ("thermal/drivers/qcom: Use generic thermal_zone_get_trip() function")
7f725a23f2b7 ("thermal/core/governors: Use thermal_zone_get_trip() instead of ops functions")
2e38a2a981b2 ("thermal/core: Add a generic thermal_zone_set_trip() function")
7c3d5c20dc16 ("thermal/core: Add a generic thermal_zone_get_trip() function")
91b3aafc2238 ("thermal/core: Remove thermal_zone_set_trips()")
05eeee2b51b4 ("thermal/core: Protect sysfs accesses to thermal operations with thermal zone mutex")
1c439dec359c ("thermal/core: Introduce locked version of thermal_zone_device_update")
a365105c685c ("thermal: sysfs: Reuse cdev->max_state")
c408b3d1d9bb ("thermal: Validate new state in cur_state_store()")
597f500fde76 ("thermal/core: Add a check before calling set_trip_temp()")
a930da9bf583 ("thermal/core: Move the mutex inside the thermal_zone_device_update() function")
670a5e356cb6 ("thermal/core: Move the thermal zone lock out of the governors")
63561fe36b09 ("thermal/governors: Group the thermal zone lock inside the throttle function")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

>From e95fa7404716f6e25021e66067271a4ad8eb1486 Mon Sep 17 00:00:00 2001
From: Di Shen <di.shen@xxxxxxxxxx>
Date: Wed, 10 Jan 2024 19:55:26 +0800
Subject: [PATCH] thermal: gov_power_allocator: avoid inability to reset a cdev

Commit 0952177f2a1f ("thermal/core/power_allocator: Update once
cooling devices when temp is low") adds an update flag to avoid
triggering a thermal event when there is no need, and the thermal
cdev is updated once when the temperature is low.

But when the trips are writable, and switch_on_temp is set to be a
higher value, the cooling device state may not be reset to 0,
because last_temperature is smaller than switch_on_temp.

For example:
First:
switch_on_temp=70 control_temp=85;
Then userspace change the trip_temp:
switch_on_temp=45 control_temp=55 cur_temp=54

Then userspace reset the trip_temp:
switch_on_temp=70 control_temp=85 cur_temp=57 last_temp=54

At this time, the cooling device state should be reset to 0.
However, because cur_temp(57) < switch_on_temp(70)
last_temp(54) < switch_on_temp(70)  ---->  update = false,
update is false, the cooling device state can not be reset.

Using the observation that tz->passive can also be regarded as the
temperature status, set the update flag to the tz->passive value.

When the temperature drops below switch_on for the first time, the
states of cooling devices can be reset once, and tz->passive is updated
to 0. In the next round, because tz->passive is 0, cdev->state will not
be updated.

By using the tz->passive value as the "update" flag, the issue above
can be solved, and the cooling devices can be updated only once when the
temperature is low.

Fixes: 0952177f2a1f ("thermal/core/power_allocator: Update once cooling devices when temp is low")
Cc: 5.13+ <stable@xxxxxxxxxxxxxxx> # 5.13+
Suggested-by: Wei Wang <wvw@xxxxxxxxxx>
Signed-off-by: Di Shen <di.shen@xxxxxxxxxx>
Reviewed-by: Lukasz Luba <lukasz.luba@xxxxxxx>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>

diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
index 7b6aa265ff6a..81e061f183ad 100644
--- a/drivers/thermal/gov_power_allocator.c
+++ b/drivers/thermal/gov_power_allocator.c
@@ -762,7 +762,7 @@ static int power_allocator_throttle(struct thermal_zone_device *tz,
 
 	trip = params->trip_switch_on;
 	if (trip && tz->temperature < trip->temperature) {
-		update = tz->last_temperature >= trip->temperature;
+		update = tz->passive;
 		tz->passive = 0;
 		reset_pid_controller(params);
 		allow_maximum_power(tz, update);





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux